Robot Connector and Harness Catalog Distribution

Please consider this from here during the wiring design of the robot.

【Total Support for Robot Connections】 - Communication Robots - Agricultural Robots - Disaster Response Robots - Surgical Robots - Mobility Assistance Robots We propose internal connections for various service robots and assembly work robots. - Consultations on usage such as bend resistance, abrasion resistance, vibration resistance, waterproofing, and narrow spaces - Consultations on the connections of various units such as camera modules, motors, batteries, sensors, and wireless modules - We can provide consultations on optimal connectors, cable proposals, development, and harness manufacturing.

• Board to Cable Connector

Leave the processing of the harness for connecting the drone flight controller to us. We provide harnesses with crimp height values managed by a dedicated crimping machine!

We can provide harness processing compatible with drone flight controllers such as Pix Hawk, PXFmini, and other flight controllers. Connectors used in drone flight controllers, such as Hirose Electric's DF13 series and JST's GH series, can be harnessed. Small size, lightweight, reliable mating, and vibration resistance are required for drone harnesses. We will propose the optimal wires and harnessing methods based on current values and compatibility of crimp terminals. Please feel free to consult us regarding fixation methods and waterproofing treatments.

• Board to Cable Connector
• Harness

For customers developing drones, battery connection harness processing starts here.

We can provide harnesses for connectors used in drone batteries, such as AMASS XT30, XT60, XT90, and fully locking power connectors like Hirose DF63. Additionally, we can create harnesses that branch from a single connector. We can suggest connectors based on current, locking method, wire size, and more. Please feel free to consult us regarding waterproof connections as well.

• Board to Cable Connector
• Lithium-ion battery
• Harness

We will provide a quote upon sending the wiring diagram. We also welcome inquiries for small lots and short delivery times.

Do you have any of these troubles? "I chose a wire that fits the connector, but it was incompatible..." "It’s difficult to find a wire that matches the connector..." Our company has over 20 harness processing partner companies nationwide, each producing their specialty wire harnesses daily. If you request a wire harness, please prepare a wiring diagram, and we will provide a quote immediately. Our partner factories at Taihei Electric thoroughly manage all processes, so you can confidently request processing. 【Examples of various wire harness processing products】 ■ Compatible with over 1,800 types of crimp terminals from various manufacturers ■ Crimp processing for flat cables from various manufacturers ■ Processing for round, rectangular, and waterproof connectors from various manufacturers ■ Processing for ultra-high frequency coaxial connectors over 40GHz ■ Processing for AWG#42 thin wire coaxial connectors ■ Processing for various optical fiber connectors, including LC connectors *For more details, please refer to the PDF document or feel free to contact us.

• Harness

Fiber optic cables, discrete wires, and bushings can also be customized! We will collaborate with wire manufacturers to propose suitable connections.

At Taihei Electric, we handle wire harness products equipped with connectors from various companies, including Hirose Electric's connectors. In cooperation with wire manufacturers, we realize the "suitable connections" required by our customers. There may be cases where standard cables or wires cannot be processed, but we will prepare custom cables or wires. We can also address concerns such as, "I used cables from online shopping for the prototype, but what should I do when it comes to mass production?" Please feel free to consult with us. 【Other concerns (examples)】 ■ Cable outer diameter does not match ■ Insufficient number of wire cores ■ Need for weather-resistant sheathing 【Various custom cables (examples)】 ■ Cable exclusively for Hirose Electric's waterproof compact connector HR30 ■ Cable exclusively for Hirose Electric's waterproof compact connector LF ■ Cable exclusively for Hirose Electric's industrial Ethernet compact connector ■ High-flexibility three-core parallel wire (suitable for motor connections in small robots, etc.) ■ Biocompatible cable (suitable for contact with the human body in medical devices, etc.) ■ Low-friction wire (suitable for internal wiring in narrow conduits or moving devices) *For more details, please refer to the PDF document or feel free to contact us.

• cable
• Other cable related products

Reliable technology that leads to solutions! A wide variety of options in the 12 series is available!

The "SignalBee Series" is a sister brand born as a signal type of the power cable connector brand EnerBee, which is based on the concept of "compact high performance." With a wide variety of options and high versatility, it provides the best solutions tailored to various applications. It can be used in various fields, including industrial equipment, and delivers high performance. With its rich variety, it can broadly cover space-saving and labor-saving wiring solutions. 【Features】 ■ Wide variety of options ■ High versatility ■ Provides the best solutions tailored to applications ■ Delivers high performance ■ Broadly covers space-saving and labor-saving wiring solutions *For more details, please refer to the PDF materials or feel free to contact us.

• Other Connectors

High-speed, high-quality, long-distance signal transmission! Space-saving and low-profile design with a height of 1.5mm for optical active connectors.

We would like to introduce our optical active connector, the 'BF4M Series'. It uses high-bend-resistant optical fiber, allowing for optical transmission with a simple electrical connector connection. The low-profile design, with a height of 1.5mm, results in low power consumption. Additionally, it enables high-speed signal transmission without EMI noise and offers variations such as optical connector relay types and device interconnection types. 【Features】 ■ Optical transmission with a simple electrical connector connection ■ High-speed signal transmission without EMI noise ■ Uses high-bend-resistant optical fiber ■ Low power consumption ■ Variations available, including optical connector relay types and device interconnection types *For more details, please refer to the PDF document or feel free to contact us.

• Optical Connector
• Other Connectors

It can be used for noise countermeasures and LAN! It has IP68 waterproof performance. It can be processed from one dedicated braided weather-resistant cable.

The "LF Harness" is a waterproof connector compatible with small sizes and shielding. The cable's shield braid is grounded to the connector shell, allowing for high-speed transmission. It has waterproof performance of IP67 and IP68 when mated. Additionally, it supports both soldering and crimping connections, with crimping being possible through automatic wiring for cost reduction. We also have dedicated equipment for crimping multi-pole 20-core types, so please feel free to consult us. 【Features】 ■ Compact, shielded, and high-speed compatible ■ Waterproof performance of IP67 and IP68 when mated ■ LF dedicated cables: 4-core and 20-core cables are in stock Other core counts are also available (minimum length = 100m) ■ Can utilize your existing cables *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof Connector
• Harness
• connector

Weather resistance test cleared! Suitable for outdoor use with IP68 waterproof performance. Dedicated cables are in stock, and we accept processing from one piece.

The "HR30 Harness" is a small, lightweight waterproof plastic connector. It maintains waterproof performance of IP67 and IP68 when mated. We process it using a dedicated jig for installation, ensuring reliable quality. Additionally, it can accommodate overmolded types (cable can be integrally molded). We offer custom options to meet your needs. We also have 3m connectors with terminals in stock. Please feel free to consult us when needed. 【Features】 ■ Small and lightweight ■ Waterproof = IP68 ■ Dedicated wire stock available ■ Harness processing *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors

For anything related to connectors, wire harness processing, switches, and other electronic components, please leave it to Taihei Electric Co., Ltd.!

We handle individual components such as Hirose Electric connectors and switches from Nidec Copal Electronics (formerly Fujisoku), as well as processed products like connectors with wires (i.e., wire harnesses) and connectors with enclosures. Taihei Electric Co., Ltd. is a specialized trading company dealing with electronic components, including Hirose Electric connectors, various wire harnesses, switches from Nidec Copal Electronics, and small-lot lithium-ion batteries. In addition to selling a variety of products, we leverage our extensive experience and knowledge to propose harness processing tailored to your company's needs. With a motto of supplying small lots, we can support customers nationwide, primarily in the Kanto region, so please feel free to contact us. 【What We Can Do】 1. We can accommodate small lots starting from one piece! 2. Nationwide support available! 3. We propose suitable components based on the situation! *For more details, please download our catalog or feel free to contact us.

• connector

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

At construction sites, temporary parking lots may be established for workers and construction-related vehicles. On unpaved ground, mud and ruts can easily occur due to rain, which may hinder vehicle access. Hyper CLT mats are civil engineering materials that utilize wood CLT. By laying them in temporary parking lots, a suitable environment for vehicle passage and parking can be created while protecting the ground. They can be laid only in the necessary areas, and after the construction is completed, they can be removed and repurposed for temporary roads or access routes. The 5×10 panels weigh approximately 230 kg, and the 5×20 panels weigh about 460 kg, making them lightweight and easy to install and remove even with small machinery, allowing for changes in parking space. Additionally, they offer benefits unique to wood, such as glare reduction, noise reduction, and CO2 fixation. They are registered as a technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A," and can be utilized for the development of temporary parking lots and innovative public works.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.