The compact WAP-S type small fully automatic filter press can handle large volumes of slurry! 【Free dewatering evaluation test!】
The small fully automatic filter press model WAP-S is a compact filter press equipped with a pressing mechanism that can process large volumes of slurry automatically. With its "pressing mechanism + unique sludge simultaneous discharge mechanism," it filters only during the time when filtration efficiency is high, allowing it to handle amounts of slurry that would be unimaginable when comparing performance based on typical chamber capacities. Additionally, all tedious tasks such as opening the frame, moving the filter plates, and scraping off the sludge are performed automatically, making operation simple and safe without burdening the operator. ◆ Each cycle takes about 30 minutes, allowing for significant dewatering of a large amount of slurry despite its small size. ◆ After dewatering through pressing, the sludge undergoes further air drying, which can significantly reduce the moisture content. ◆ Compared to non-pressing dewatering machines, it can greatly reduce sludge disposal costs. ◆ The discharge of sludge is done using a unique filter cloth running method that discharges quietly without causing mechanical stress. *For more details, please download the quotation request form and contact us. We will provide information on pricing and delivery times.
Inquire About This Product
basic information
【Features】 - All tedious tasks such as opening frames, moving filter plates, and scraping off sludge are automated. - Equipped with a compression mechanism to reduce the moisture content of sludge. - One process takes about 30 minutes. - Simple structure with fewer breakdowns. - Compact filter press. *For more details, please download the quotation request form and contact us. We will provide information on pricing and delivery times.
Price information
Please contact us.
Delivery Time
※Please contact us.
Applications/Examples of results
Delivery record: Over 100 units (total of WAP type and WAP-S type) ● For more details, please contact us or visit our website.
Detailed information
-
Comparison of moisture content in sludge between non-dewatering type and WAP type In the case of the WAP type, the moisture content of the sludge can be reduced to about 70%. Lowering the moisture content of the sludge directly leads to a reduction in industrial waste disposal costs.
-
Comparison of sludge disposal costs for various dewatering machines ■ Running cost estimation conditions Non-pressing type sludge moisture content and generation amount: 100kg (moisture content 85%) Non-pressing type frame opening and sludge removal work: 1 hour/day Operating days: 22 days/month Labor cost: 3000 yen/hour Disposal cost: 35 yen/kg
-
Dehydration Evaluation Test The WAP-type sludge discharge operates by driving a long cloth to smoothly peel off the filtered sludge, so it is important to confirm whether the nature of the sludge is suitable for the WAP type. Additionally, since you may be concerned about the moisture content of the generated sludge, we offer a free dehydration evaluation test.
Line up（5）
| Model number | overview |
|---|---|
| WAP-S-4 | Treatment capacity: approximately 100kg/day (*), filtration area: 1.0m2, frame capacity: 10L |
| WAP-S-6 | Treatment capacity: approximately 150kg/day (*), filtration area: 1.5m2, frame capacity: 15L |
| WAP-S-8 | Treatment capacity: approximately 200kg/day (*), filtration area: 2.0m2, frame capacity: 20L |
| WAP-S-10 | Treatment capacity: approximately 250kg/day (*), filtration area: 2.5m2, frame capacity: 25L |
| (*) Treatment capacity guideline | Moisture content: equivalent to 85%, operating time: 8 hours/day *It may vary depending on the properties of the slurry being treated. |
catalog（3）
Download All Catalogs
![In fact, a fully automatic dehydrator that is cheaper than a manual dehydrator! [Free case study available]](https://image.mono.ipros.com/public/catalog/image_generated/01/46f/348584/348584_IPROS4331028868086837223_1.jpg?w=120&h=170)
Company information
Japan Wacon was established in 1971 during a time when pollution issues were gaining attention and the need for wastewater treatment was increasing. Given the background of that era, our main business focused on wastewater treatment facilities for plating factories. Among them, we have had many dealings with so-called "local plating shops," which are difficult for major water treatment companies to serve. We have made various efforts to accommodate limited installation spaces and costs. As a result of these efforts, our long-selling products, such as the commissioned regeneration type ion exchange resin tower "Waconer" and the compact fully automatic filter press "WAP series," were born. Japan Wacon is a comprehensive water treatment equipment manufacturer. Just because we have our own brand of equipment does not mean we will always propose it; rather, we prioritize what type of equipment will satisfy our customers in terms of both performance and cost, and we propose pure water production equipment and wastewater treatment facilities accordingly. We are also focusing on enhancing our standard product lineup of water treatment equipment by leveraging the water treatment technology and design know-how for compact devices that we have cultivated over the years. Moving forward, we will continue to sincerely engage with water treatment technology to provide the best proposals for our customers, strive for technological improvement, and work diligently to support society through manufacturing that centers on water treatment.
![Fully Automatic Filter Press [Contributing to SDGs Initiatives!]](https://image.mono.ipros.com/public/product/image/277/2000669604/IPROS91794608306561977731.png?w=280&h=280)
