If the opening does not match, it's not a problem. Here is an example of replacing a ventilation fan attached to the ceiling with the BF-261RGA!
To customers considering the installation of a bathroom ventilation drying heating unit with a graphite heater: We would like to introduce a case of replacing the ceiling-mounted type "BF-261RGA" bathroom ceiling fan. The installation time is approximately 2 hours. *Please note that this may vary depending on the site conditions. 【Installation Steps】 (1) Confirm the installation position (2) Remove the existing ventilation fan - 1 (3) Remove the existing ventilation fan - 2 (4) Expand the opening (5) Connect the exhaust duct (6) Secure the duct connection (7) Install the main unit - 1 (8) Install the main unit - 2 (9) Set the direction of warm air discharge (10) Attach the front panel (11) Completion of installation and trial operation *For more details, please refer to the PDF document or feel free to contact us.
Inquire About This Product
basic information
【Details of Construction Procedure】 (1) Check measurements to see if installation is possible at the location of the existing ventilation fan. (2) Turn off the breaker and remove the panel of the existing ventilation fan. (3) Disconnect the electrical wiring and remove the main body of the ventilation fan. (4) If the opening is small, enlarge the opening. (5) Connect the exhaust duct to the duct connection port. (6) Secure the duct connection port to the ceiling edge on the exhaust side with screws. (7) Wire the power and ground, installing according to the misconnection prevention guide. (8) While holding the main body, secure it to the ceiling with fixing screws. (9) Adjust the airflow direction to face the washing area of the bathroom. (10) Secure the panel. (11) Installation complete; conduct a trial run. *For more details, please refer to the PDF materials or feel free to contact us.
Price range
Delivery Time
Applications/Examples of results
For more details, please refer to the PDF document or feel free to contact us.
catalog（1）
Download All Catalogs
Bathroom ventilation drying heating unit "BF-RG series"
Company information
Our company conducts everything in-house, from product planning and development to product design and prototyping, mold design and manufacturing, molding and processing, assembly and inspection, quality assurance and management, sales and logistics, and maintenance services. As a result, the know-how we have cultivated so far is continuously applied directly to product development and is reflected in the creation of products that meet the needs of the times. Our strength lies in our ability to quickly reflect issues and improvements in product development and product enhancements, along with our ongoing "TMC Cycle." Furthermore, we are committed to domestic production (Made in Japan of trust) to ensure a stable supply of high-quality products. The ability to respond swiftly and meticulously, made possible by our consistent operations at our domestic factories, is our company's greatest feature. To "contribute to the creation of comfortable living spaces," "Takasusangyo" will continue to evolve daily to provide better living environments. Please feel free to contact us with any requests.
![[Introduction and Installation Case] Maintenance of Rooftop Ventilation Fan (Roof Fan)](https://image.mono.ipros.com/public/product/image/357/2000347440/IPROS1833198686478848759.jpg?w=280&h=280)
![[φ170mm processing] Cell size 15mm honeycomb](https://image.mono.ipros.com/public/product/image/2be/2000835478/IPROS6240936821742261671.jpg?w=280&h=280)
![[Environmental Pollution Problem Solving] Suspended Particles and Adhering Particles Visualization Evaluation System](https://image.mono.ipros.com/public/product/image/b1b/2001104370/IPROS14886232117977952252.png?w=280&h=280)