Successfully eliminated pinholes! Here’s the story behind the birth of Gastose.
"Gas Tose" refers to products equipped with gas vent (air vent) functions such as ejector pins and core pins. The impetus for its creation was a request for cost reduction due to an increase in the delivery quantity of molds transferred from another company. When we produced 24 pieces, pinholes occurred in the outer 12 pieces. Even after trying to improve the situation by adding many vents to the cavity, there was no effect, so we decided to realize the concept we had been considering for some time: "venting gas from inside the ejector pins." After many repeated failures, we finally completed it. When we placed one of the completed gas vent pins (Gas Tose) directly under the sprue, the pinholes were beautifully resolved. *For more details, please refer to the PDF document or feel free to contact us.
Inquire About This Product
basic information
【What We Strive For】 ■ Create molds that can produce under ideal molding conditions - Clamp pressure should be below 40% of the mold's capacity - Set resin pressure to avoid burrs on the parting surface - Set ideal value ranges for other areas based on past data ■ Poorly performing molds can be transformed into good molds with gas vents - If short shots or sink marks occur, add gas vents and increase gas vents in the product area - The depth of gas vents should be increased until filling occurs *For more details, please refer to the PDF document or feel free to contact us.
Price range
Delivery Time
Applications/Examples of results
For more details, please refer to the PDF document or feel free to contact us.
catalog（1）
Download All Catalogs
Company information
■Sales of In-House Developed Products Gas release pins "Gastose" and "Super Gastose," thread prevention sprues "Radiator Sprue," etc. ■Mold Design and Manufacturing We respond to the demand for precision mold shapes. Our company specializes in high-volume production, and we are confident in our technology. Please feel free to consult us if you have issues such as "unable to produce from 12-cavity to 24-cavity." ■Plastic Injection Molding Our unique molding technology using our original product "Gastose" developed in-house. We deliver highly reliable products in all aspects, including complex shapes with high technical demands and stable quality.
![[Parts Processing Example] Extremely Small Pins *Can be processed from 10μ!](https://image.mono.ipros.com/public/product/image/348/2000329767/IPROS6187441166903825285.PNG?w=280&h=280)
![[Poka-Yoke Example] Prevention of Half-Locking of Connectors](https://image.mono.ipros.com/public/product/image/38d/2000538321/IPROS20376553292595742404.jpeg?w=280&h=280)
![[For efficient water drainage] 100% water-draining air nozzle](https://image.mono.ipros.com/public/product/image/00f/2001469742/IPROS9319730289540870960.png?w=280&h=280)
