Aluminum Cold Blackening Agent Tobikaburakki A New Type 2-Component
Aluminum Room Temperature Black Dye Tobikabra Black A New Type (Two-Component Type) Tobi Chemical
The black dyeing process for aluminum can be easily done at room temperature by anyone, anywhere. This product has different usage methods for the two components, so please check the instructions for use.
Aluminum Room Temperature Black Dye Tobika Blackie A New Type (Concentrate) 【Target Metals】 Widely used for black dyeing of aluminum finished products and parts. - Pressed parts, pins, screws, bolts, nuts, washers, springs, shafts. - Finished products or cast parts of machines, tools, and molds. - Black dyeing or repair of parts of assembled machines. 【Characteristics】 Activated with Solution A and treated with Solution B for black dyeing. Can be done at room temperature by immersion. No special equipment required. - The processing technique is extremely simple and does not require special equipment; a plastic bucket is sufficient for small quantities. - A uniform coating can be achieved even on complex shapes. - Since the processing temperature is room temperature, it does not damage the material. - Blackie is odorless, non-flammable, and does not deteriorate over long-term storage. - There is almost no dimensional change before and after processing.
Inquire About This Product
basic information
1. **Degreasing**: The black dyeing process requires complete degreasing due to chemical reactions. Insufficient degreasing can lead to uneven dyeing. For degreasing agents, there is trichloroethylene or a dedicated degreasing agent, the water-based degreasing cleaner Tobikamaritt from Tobi Co., Ltd. 2. **Surface Activation**: (Solution A) Dilute the aluminum room temperature black dye Tobika Blacky A's Solution A from 3 to 4 times with water, depending on the material and surface structure of the aluminum, and place it in a plastic container. When diluting, add Solution A to water (due to exothermic reaction), not water to Solution A. Immerse the aluminum parts that have been degreased and rinsed in water for about 5 to 7 minutes, depending on the material and surface structure. If there is rust or smut, immerse in a 10% hydrochloric acid aqueous solution (diluted industrial hydrochloric acid with water 2 to 3 times) for 1 to 2 minutes. 3. **Water Rinse**: Rinse thoroughly with water. 4. **Black Dye Treatment**: (Solution B) Prepare a plastic container and pour the concentrated Solution B of the aluminum room temperature black dye Tobika Blacky A into it. Immerse the above rinsed parts evenly, and once the surface is uniformly black, remove them. The immersion time depends on the aluminum material, but generally, it is about 30 seconds to 2 minutes.
Price range
Delivery Time
Applications/Examples of results
It can be widely used for black dyeing of aluminum finished products and parts. - Pressed parts, pins, screws, bolts, nuts, washers, springs, shafts. - Finished products or cast parts of machines, tools, and molds. - Black dyeing or repair of assembled machine parts. The surface is activated with solution A, and black dyeing is processed with solution B. It can be done at room temperature by immersion, with no special equipment required. - The processing technique is extremely simple and does not require special equipment; a small quantity can be handled with a plastic bucket.
Company information
Tool System Co., Ltd. is a company located in Suruga Ward, Shizuoka City, Shizuoka Prefecture, that deals in machine tools, cutting tools, clamps, and chemical products.
![Fluororesin convex surface coating [Reduced contact area even on flat surfaces]](https://image.mono.ipros.com/public/product/image/2bd/1260002/IPROS63025902090654849070.png?w=280&h=280)
