HDC right angle measurement and a simple measuring device for measuring the XY origin of large workpieces.
HDC right angle measurement and a simple measuring device for measuring the XY origin of large workpieces by NJI.
HDC-150-HDC-80 Sky GOO Simple Length Measuring Device for Measuring Right Angles and XY Origin of Large Workpieces - NJI
Tengu-GOO (The nose of the Tengu) is a simple measuring device for measuring the XY origin of large workpieces. Horizontal & Distance Check Bar
Inquire About This Product
basic information
Usage Instructions: The dimensions are HDC-80. A. Right Angle Measurement Place the workpiece on the table, attach the top-GOO to the right angle measurement surface magnetically, and install the dial gauge on the height gauge. (On the machine, the dial gauge can be attached to a drill chuck, etc.). The gauge line spacing is 100mm (50mm), and measure the two points: the apex of the gauge line on the magnet side and the apex of the gauge line at the tip with the dial gauge. The error measured will represent the right angle value relative to 100mm (50mm). If the measurement is 0 to 0, the right angle will be 0.00/100mm (50mm). If the measurement is 0 to 0.03, the right angle will be 0.03/100mm (50mm). (The dial gauge's fluctuation indicates whether it is an obtuse or acute angle relative to 90°.) B. End Face Measurement For large workpieces, when the top surface is machined with facing, the XY reference plane is processed on the cutter side (such as an end mill). This process is absolutely necessary when the reference plane is used for mounting.
Price range
Delivery Time
Applications/Examples of results
Usage Instructions: The dimensions are HDC-80. A. Right Angle Measurement Place the workpiece on the table, attach the top-GOO magnetically to the right angle measurement surface, and install the dial gauge on the height gauge. (On the machine, the dial gauge can be attached to a drill chuck, etc.). The gauge line spacing is 100mm (50mm), and measure the two points: the top vertex of the gauge line on the magnet side and the top vertex of the gauge line at the tip with the dial gauge. The error measured will represent the right angle value relative to 100mm (50mm). If the measurement is 0 to 0, the right angle will be 0.00/100mm (50mm). If it is 0 to 0.03, the right angle will be 0.03/100mm (50mm). (The fluctuation of the dial gauge indicates whether it is an obtuse or acute angle in relation to 90°). B. End Face Measurement For large workpieces, when the top surface is machined with facing, the XY reference plane is processed on the side of the cutter (such as an end mill). This process is absolutely necessary when the reference plane is used for installation. Align parallelism in the longitudinal direction of the X-axis and establish the XY coordinate origin from the side. If there is a height in the Z direction, it may be difficult for the dial gauge to reach the machining reference plane, making position measurement challenging.
Company information
Tool System Co., Ltd. is a company located in Suruga Ward, Shizuoka City, Shizuoka Prefecture, that deals in machine tools, cutting tools, clamps, and chemical products.
![[Freedom EVO Case Study] Tokyo Jikei University School of Medicine Department of Bacteriology](https://image.mono.ipros.com/public/product/image/50f/2000158023/IPROS4097367595769703643.JPG?w=280&h=280)
