Electric hot water bath type No. 16 to No. 24 (for heating and cooling)
EB type No. 16 to EB type No. 22 (electric hot water boiling type)
It is possible to heat and stir while crushing using a built-in heater with a heating and insulation jacket attached to the mortar.
【Features】 - Capable of processing under heating and cooling environments, maintaining the characteristics of the Ishikawa-type mixing and grinding machine. - Equipped with a double vessel (jacket) for heating and insulation, allowing for uniform heating of the porcelain bowl from the outside by adding hot water while performing mixing and grinding. - Further temperature increase inside the porcelain bowl (mortar) can be achieved through oil heating. - By filling the double vessel with cold water or supplying and circulating cold water from an external chiller, it is possible to cool the porcelain bowl from the outside while performing mixing and grinding (in the case of cooling, additional measures may be necessary to prevent condensation depending on the usage environment). - Optional thermostat installation allows for temperature maintenance by controlling the on/off power of the built-in heater. - Processing in a heated environment reduces drying and concentration time. - Power supply can accommodate both single-phase 100V and three-phase 200V. 【Suitable Use Cases】 - Heating allows for simultaneous dispersion, kneading, concentration, and drying of slurries, pastes, and colloids, enabling fine grinding without solidifying the materials. - Simultaneous grinding and disintegration of powder particles during heating also allows for the removal of moisture from hydrates, facilitating drying.
Inquire About This Product
basic information
**Features of the Ishikawa Type Grinding Machine** The following features are available: (1) Uniform and consistent mixing and grinding treatment within the bowl due to unique design (2) Simultaneous mixing and grinding processing is possible (3) High driving torque allows for processing of high-viscosity materials (4) Lower processing energy compared to ball mills, enabling "mild processing" This product retains the basic performance of the Ishikawa type grinding machine while allowing for processing with heating and cooling. There are five models of this product: Size Processing Volume Heater - No. 16: 0.4L 0.6kW - No. 18: 1.0L 1.0kW - No. 20: 2.0L 1.0kW - No. 22: 4.0L 1.0kW - No. 24: 7.0L 1.0kW **Introduction to the Testing Laboratory** You can use the experimental machine for free to evaluate the functions and performance of the Ishikawa type mixing grinding machine. Additionally, our staff, who are well-versed in mixing and grinding processing, will support your experiments according to your needs. Furthermore, we will propose the optimal selection of the Ishikawa type mixing grinding machine and mixing grinding processing for your needs. Please feel free to utilize this when considering your options.
Price range
Delivery Time
Applications/Examples of results
- Electronic component materials - Conductive ink, conductive adhesive - Insulating materials, sealing materials - Pigments, glazes - Metal (gold, silver, copper, copper) paste - Glass paste - Secondary batteries - Carbon paste - Lithium battery materials, electrode materials for all-solid-state batteries - Dispersion of carbon nanotubes - Ceramic materials - Abrasive wheels, abrasive grains, polishing agents - Food (miso, red bean paste, spices, sesame, etc.) - Pharmaceuticals, ointments - Chemicals, cosmetics - Chemical and fiber materials - Equipment and devices for research and development - Stirring, grinding, dispersion, and kneading processes in universities and research institutions
Detailed information
-
(1) Model 16EB - Processing volume: 0.4L - Device width: 510mm - Device depth: 510mm - Device height: 1260mm - Power supply: 100V 0.2kW - Heater: 0.6kW (2) Model 18EB - Processing volume: 1.0L - Device width: 510mm - Device depth: 510mm - Device height: 1380mm - Power supply: 100V 0.2kW - Heater: 1.0kW (3) Model 20EB - Processing volume: 2.0L - Device width: 610mm - Device depth: 610mm - Device height: 1470mm - Power supply: 100V 0.2kW - Heater: 1.0kW (4) Model 22EB - Processing volume: 4.0L - Device width: 610mm - Device depth: 610mm - Device height: 1550mm - Power supply: 100V 0.4kW - Heater: 1.0kW (5) Model 24EB - Processing volume: 4.0L - Device width: 610mm - Device depth: 610mm - Device height: 1550mm - Power supply: 100V 0.4kW - Heater: 1.0kW
catalog（4）
Download All Catalogs
![[Comprehensive Catalog] Ishikawa-style Automatic Mortar and Pestle, Ishikawa Factory Co., Ltd.](https://image.mono.ipros.com/public/catalog/image/01/007/759980/IPROS7614596388894315027.jpeg?w=120&h=170)
![[Usage Example] How to Make Handmade Soba Using "Soba No. 2"](https://image.mono.ipros.com/public/catalog/image/01/e3b/739991/IPROS10674543885856126634.jpeg?w=120&h=170)
Company information
Our company is a specialized manufacturer of automatic mortar and pestle machines. The features of the automatic mortar and pestle (Ishikawa-style stirring and grinding machine) include the ability to simultaneously perform stirring, grinding, mixing, and kneading using unique technology. It has the following basic capabilities: 1. Uniform and precise mixing is possible - Allows for uniform mixing while controlling particle size. 2. Easy uniformity and control of particle size - Can achieve uniform particle size while finely grinding. 3. Prevents excessive deterioration of materials - Due to low mechanical stress (mild processing energy), it can process while suppressing over-grinding and chemical changes. - High-energy processing (such as ball mills) can cause reaction changes due to heat generation, but temperature management is easier with the automatic mortar and pestle. 4. Suitable for small-scale prototyping and experiments - Ball mills and planetary mixers require large amounts of raw materials, but the automatic mortar and pestle can prototype with a minimum of 0.5g. - Easily adaptable for process scale-up (easy application from small to large scale). 5. Capable of processing slurries, pastes, and high-viscosity materials - The motor torque for the pestle rotation is high, allowing for processing of high-viscosity materials.
![[Paper Introduction] "Mechanochemical Dehydration of Hydrated Crystals"](https://image.mono.ipros.com/public/product/image/cc2/2001508346/IPROS2603178667283669911.jpg?w=280&h=280)
![[Case Study] Preventing Bead Jamming to Achieve Stable Operation of the Disperser](https://image.mono.ipros.com/public/product/image/d51/2000583475/IPROS50379147423046278461.png?w=280&h=280)
