Aluminum sludge recovery practical test

Introducing the test conducted for sludge recovery in the clean tank under the cyclone unit!

Many users utilize cyclone machines for the recovery of sludge generated during aluminum cutting. While these machines can handle large flow rates, most aluminum, fine powders, grinding (including grinding wheels), carbide polishing, and micro-particles with minimal specific gravity are largely mixed, resulting in a limited amount of recoverable sludge. As a result, the clean tank at the bottom of the cyclone machine, which should collect the cleaned cutting oil, is often not sufficiently cleaned, and a significant amount of sludge remains. To address this issue, we used our sludge recovery device "M1-250M" to recover sludge from the clean tank at the bottom of the cyclone machine. [Overview (Partial)] ■ Implementation Location: Clean tank at the bottom of the cyclone machine (approximately 500L) ■ Sludge Classification: Aluminum ■ Recovery Device: M1-250M (Maximum processing flow rate 80L/min to 90L/min) ■ Recovery Time: 3 minutes x 5 times, totaling approximately 15 minutes *For more details, please refer to the PDF document or feel free to contact us.

Water treatment equipmentWastewater/wastewater treatment equipmentOil-water separator