For bathrooms, we recommend environmentally friendly paint with F☆☆☆☆ Four-Star certification!
The Furocoat series of paints is a mold-resistant paint that complies with building standards, ensuring safety and peace of mind!
It is a paint designed for use in bathrooms and bathtubs, prioritizing safety above all!
The government has established standards and regulations for building materials that emit formaldehyde, which can cause sick house syndrome. These standards also apply to paints, and "F☆☆☆☆" (Four Star) signifies the highest level of compliance. The "Frocoat Series Paint" meets these standards. Please use "F☆☆☆☆" (Four Star) certified paint to address sick house syndrome. Additionally, this paint is certified by SIAA for "mold prevention," so the coating will exhibit mold-resistant properties. Even if you invest in new painting, if sick house syndrome occurs, you will need to repaint or renovate, which can be costly. When considering painting, it is advisable to view "sick house syndrome" and "F Four Star" together, and I recommend the "Frocoat Series Paint." - There are three types of paint: Bio Coat LXECO: SIAA and Four Star certified type Bio Coat ECO: Mold prevention function not at SIAA level, Four Star certified type Frocoat ECO: Budget version of mold prevention, Four Star certified type
Inquire About This Product
basic information
- There are three types of paint. Bio Coat LXECO: SIAA, Four-Star certified type Bio Coat ECO: Anti-mold function not at SIAA level, Four-Star certified type Flow Coat ECO: Budget version of anti-mold, Four-Star certified type - Since it does not contain toluene or xylene, there is less unpleasant thinner smell during work. - The surface hardness is also at H level, so it follows the expansion and contraction of materials like FRP bathtubs and is very durable compared to other companies against impacts (such as dropping a showerhead). "Surface Preparation Before Painting" - Completely remove old paint, rust, moisture, and oil from the material. Also, if performing solvent degreasing, please use Pre-Solvent and Silicone Off. - Sanding should be done with a final grit of #600 or higher. - After the primer and intermediate coat, please promptly apply the topcoat. "Two-Component Acrylic Urethane Base Coat Paint" This product is designed to perform at its best under various conditions, but the actual performance may vary depending on the painting conditions, drying conditions, and materials used, so please confirm in advance before use.
Price information
It varies depending on the amount handled, so please feel free to contact us.
Delivery Time
※It varies depending on the handling volume, so please feel free to contact us.
Applications/Examples of results
【Recommended Uses】 ■ Painting in bathrooms of hotels, inns, spas, wellness facilities, and private homes ■ Washbasins, toilets, etc. ■ Suitable for wall painting in water-related areas such as kitchens.
Detailed information
-
We take the time and effort to properly prepare the surface (sanding) before painting, so the paint won't peel off.
Company information
Our company is pursuing the possibilities of painting by introducing various equipment. The trivalent chemical treatment coating cleaning device significantly enhances the "rust prevention and durability improvement" for iron and die-cast products. After this treatment, we perform painting work in a class 100,000 clean room (where temperature and humidity are controlled to prevent static electricity and dust, resulting in a very clean finish on the paint surface), creating aesthetically pleasing coatings. "Insulation coating" to prevent low-temperature contact burns from computers. "X-ray shielding coating" for glasses to prevent secondary exposure for medical professionals. "Swallowing prevention coating" to prevent accidental ingestion of chip products. "Antibacterial, antiviral, and mold-resistant coating" for various products such as handrails, handles, and buttons. [General Metals] Iron, copper, aluminum, stainless steel, titanium, brass, magnesium, zinc die-cast, aluminum die-cast, rubber cast, etc. [General Plastics] ABS, PC, PP, acrylic, nylon, polyacetal, ferrite, etc. We provide painting solutions aimed at enhancing the functionality, design, and added value of the final surface of your products.
![[SIAA Certification Coating] 'BIO BATH COAT SYSTEM'](https://image.mono.ipros.com/public/product/image/05b/2000569752/IPROS20001210613825417985.jpeg?w=280&h=280)
![[English Market Research Report] Global Market for Powder Coatings](https://image.mono.ipros.com/public/product/image/ca3/2001201089/IPROS16765147928184422159.png?w=280&h=280)
![Quality Control of Polypropylene (PP) Using Near-Infrared Analyzer [Technical Document]](https://image.mono.ipros.com/public/product/image/007/2000513325/IPROS53572948766838843750.jpeg?w=280&h=280)
![Simultaneous quantitative analysis of four components of PET resin using near-infrared analyzer [Technical Document]](https://image.mono.ipros.com/public/product/image/0c7/2000513859/IPROS15569230536652514621.jpeg?w=280&h=280)
![Rapid measurement and significant cost reduction with near-infrared analyzers (NIR) [Technical Document]](https://image.mono.ipros.com/public/product/image/b99/2000578838/IPROS62449680339780953302.jpeg?w=280&h=280)
![Resinization of HMI, HUD, and clusters, reduction of component count [heat dissipation, EMC]](https://image.mono.ipros.com/public/product/image/2100213/IPROS6494574281949856507.png?w=280&h=280)