Fixed-point thermal imaging camera that does not require power supply or network construction.
No power or network installation is required; simply place the camera, and it can immediately record temperature distribution and be easily monitored remotely. It allows for point monitoring at temperatures ranging from -10°C to 400°C, easily digitizing temperature changes in specific areas. Equipped with a large-capacity lithium-ion battery, it utilizes wireless network communication via LTE, commonly used in mobile phones. Therefore, it can be installed anywhere there is mobile signal coverage. Additionally, with three captures per day, the battery can operate continuously for about three years. The magnet charging method allows for charging on-site without removing the camera, even when the battery is low. The exterior features a sealing structure all around, achieving high durability while providing IP65 waterproof and dustproof performance. It can operate continuously even in harsh outdoor environments, such as rain and dust. As it uses an infrared sensor, it can detect temperature changes even in dark environments without light. By adopting an intermittent measurement method instead of continuous video measurement, significant power savings have been achieved compared to conventional products. This allows for continuous operation solely on the internal battery, and since it also has built-in mobile communication, it can be easily introduced without the need for power or communication installation.
Inquire About This Product
basic information
Uplink Communication Method: LTE Cat.1 Downlink Communication Method: Bluetooth(R) 5.0 (via BLE-LTE Router) Dimensions: 125.5mm x 139.9mm x 26mm Weight: Approximately 378g Initial Setup: iOS App Camera Resolution: 160 x 120 Measurement Temperature Range: High Gain Mode: -10℃ to 140℃ Low Gain Mode: -10℃ to 400℃ Error Range: Below 100℃: ±5℃ Above 100℃: ±5 to 10% *Varies by Gain mode Spectral Range: 8μm to 14μm (long-wave infrared) Thermal Sensitivity: < 50 mK (0.050℃) Non-uniformity Correction: Built-in Internal Power Supply: Lithium-ion battery External Power Supply: Magnetic charging method Continuous Operating Time: Approximately 3.5 years with 3 captures per day Water and Dust Resistance: IP65 Operating Temperature Range: -10℃ to 75℃ Operating Humidity Range: 20% to 80% Flame Retardancy: Mainly uses PC UL94 V0 as material Image Sensor: Uncooled VOx Microbolometer Diagonal Field of View: 71° Horizontal Field of View: 51° Charging Environment: Compatible Temperature Range 0℃ to 60℃
Price range
Delivery Time
Applications/Examples of results
【Fire Prevention】 - Fire detection from natural fermentation of compost - Heat monitoring in storage areas for coal and coke - Monitoring abnormal heat generation in industrial ducts - Detection of fire precursors in unmanned power generation facilities 【Predictive Maintenance】 - Clogging of industrial waste chutes - Fires caused by bearing wear on conveyor belts 【Leak Detection】 - Steam pipe traps - High-pressure gas leak detection - Monitoring of ceiling leaks - Quality control - Quality control - Ensuring product uniformity and reliability by detecting uniform heating or cooling and abnormal heat generation. 【Incinerator Degradation Diagnosis】 - Air conditioning unevenness on building roofs - Monitoring aging degradation of furnaces - Monitoring of solar panel junction boxes - Monitoring of product temperatures - Monitoring temperature distribution within tanks - Monitoring of dam construction
Detailed information
-
Constant monitoring from -10℃ to 400℃.
-
You can add as many measurement points as needed in the thermographic image. One camera can cover multiple locations.
-
Easy configuration via web browser through cloud system provision.
-
Graph the measurement results Set thresholds to notify alerts
-
Measurement data is sent to the cloud sequentially. The measurement frequency is flexible, ranging from every 5 minutes to specified hours.
catalog（8）
Download All Catalogs
Company information
About three and a half years after its release, the cutting-edge remote inspection tool "LC Series" has been implemented in approximately 4,500 units across about 600 facilities and around 300 departments in Japan. With battery operation and built-in LTE mobile network, it can be launched immediately without the need for power or network construction. We provide everything from the web browser software (LiLz Gauge) in a seamless manner, so there is no need for cumbersome programming or ladder creation. It is the optimal solution for "instant DX" that does not stop on-site improvements.
![[Case Study on the Introduction of Remote Inspection Cameras] Fujikoshi Co., Ltd.](https://image.mono.ipros.com/public/product/image/1e5/2001130719/IPROS03696213752906614578.png?w=280&h=280)
![[Case Study of Remote Inspection Camera] Major Beverage Manufacturer Company C](https://image.mono.ipros.com/public/product/image/c8a/2001130789/IPROS54898164360749735963.png?w=280&h=280)
