High-density channel provision by the implementation department using innovative SMT technology!
Any time a relay is required and must be used in a SIF, it must conform and adhere to IEC 61508 and to the relevant industry standard (i.e. 61511). Typical cases : • Controller cannot meet power requirement (V or A) • Multiplication of contacts is required • Controller Safety Function must be inverted SIL certified relays are not used exclusively in Oil & Gas or petrochemical industries; they are also a must in many other industries: • Railways • Cars and lift • Power distribution • Any time a failure of the relay can cause a serious accident [Features] • Reduced foot print: high density, 12,5/22,5 mm per ch. • Full 3rd party certification: Coil-to-Contact SIL2/3 TÜV certified • True reliability: compatible to DO Card LM pulses • Reduced space/eng. Costs: smart line/load monitoring with transparent fault indication (no additional contacts) • Lower ownership/maintenance cost: T-proof times: 10/20 years • Reduced spare inventory: universal mounting: DIN-rail and Termination Boards • Higher reliability in & outdoor: certified -40° to + 70° c • Totally independent dual ch.: dual circuits • Full application coverage: modules available with 5 & 10 Amps contact, NE/ND application • Harsh environment resistance: G3 conformal coating • Reliable switching operations: gold-plated relay contacts *For more details, please download the PDF or feel free to contact us.
Inquire About This Product
basic information
【Other Features】 [Structure] ENCLOSURE CHARACTERISTICS • High channel density resulting from innovative circuit design using advanced surface mount components • Single or dual channel models • Plug-in screw terminal blocks to secure wires up to 2.5 mm2 • Configuration components are easily accessed by removing the side cover or via connector front panel [Line & Load Monitoring] SIL certified relays are used for critical loops where careful consideration should be given to Line and Load Monitoring. In a de-energize to safety application a wire/coil failure leads to a safety status. In an energize to safety application line failures leads to a dangerous status. In both cases failure detection is important, if not essential. Other diagnostics applications are monitoring the load status to prevent spurious trips or to verify the condition of the individual coil in a redundant coil SOV. In F&G system line diagnostics is a must and regulated by NFPA 72 code. Control system diagnostic capabilities are designed to work when no device is interposed between the control system and the load. If a relay is placed in the loop, the diagnostic function stops at the relay input circuit (coil). To perform line monitoring from field device to controller, a SIL relay with built-in diagnostic circuit is required. GM International relays will perform diagnostics of the load, wire, power supply and internal coils in all operating conditions, providing an independent alarm contact as well as transparently transferring the fault indication to compatible DO cards. GM INTERNATIONAL PATENTED DIAGNOSTICS FETATURES • Works in all load conditions: On/Off • Operates with OPEN/CLOSE Relay • Some units are software configurable • Suitable for NE/ND, AC/DC loads • Transparent fault indication to compatible system • Monitors: • Load supply voltage • Load current • Load resistance • Earth leakage • Internal relay coils [Universal Mounting units] The same device can be used in all applications to reduce spare inventory. • DIN-rail stand-alone devices • Standard and customized termination boards • Power bus using standard TS 35 DIN-rail *For more details, please download the PDF or feel free to contact us.
Price range
Delivery Time
Applications/Examples of results
【Main Uses】 ■ When the control equipment system cannot meet the required power (voltage and current) ■ When multiple contacts are required ■ When a reversal of the controller's safety function is necessary *For more details, please download the PDF or feel free to contact us.
catalog（1）
Download All Catalogs
Company information
Our company is a specialized manufacturer of explosion-proof equipment and functional safety devices, focusing on intrinsic safety barriers. Headquartered in Italy, we have been developing and manufacturing intrinsic safety barriers, signal converters, safety relays, explosion-proof power supplies, HART interfaces, and more for over 40 years. Our products are characterized by compliance with SIL standards in accordance with IEC61508 and are used in a wide range of fields such as petrochemicals, power generation, gas, pharmaceuticals, food, and water treatment, where explosion-proof and functional safety are required. Additionally, we have a proven track record of adoption by global companies such as ABB, Honeywell, Emerson, Yokogawa, and JGC, providing high reliability and safety in plants and industrial facilities around the world.