Ladder logic for LIN communication in PLC. An Ethernet conversion board that can act as both master and slave.
LINNEX is a communication interface board that can control LIN communication from the ladder program of a PLC (Programmable Logic Controller). It can act as both a LIN master and a slave simply by sending settings and commands via UDP from the PLC's Ethernet unit. ■ What you can avoid implementing in the PLC Time management of slots, header transmission, checksum addition, and slave responses are handled by LINNEX. The built-in hardware timer ticks a slot cycle of 10 to 200 ms (in 0.1 ms increments), so even if the PLC's scan time varies, the LIN schedule remains unaffected. The checksum method (Enhanced/Classic) can be specified for each message, and diagnostic IDs (60/61) are not enforced. ■ Recommended configuration In a configuration with KEYENCE KV-8000 and KV-XLE02, we have confirmed that the sending data for the next slot can be rewritten by observing the reception report of a 10 ms slot, ensuring it reflects in the same cycle (based on our actual measurements). We provide a Windows application for settings and monitoring called "LINNEX Control" free of charge. We also offer demo units for loan, so please use them for evaluation before implementation.
Inquire About This Product
basic information
[LIN Specification] Operating Mode: Master/Slave Baud Rate: 9600/19200 bps LIN ID: 0 to 63 (Data length 1 to 8 bytes) Schedule: Up to 32 slots (Transmit/Receive/Idle) Slot Cycle: 10 to 200 ms (in 0.1 ms increments) Break Length: 10 to 36 bits (default 13 bits) Checksum: Enhanced (LIN 2.x) / Classic (LIN 1.3) specified per message Slave: Up to 64 IDs (Immediate response / Transfer to PLC) Reception Report: ID, Data, Judgment, Timestamp in 10 µs increments [Hardware] Control: Ethernet (UDP) RJ-45×1 (10BASE-T/100BASE-TX) Power Supply: DC 12-24V (Input isolation) LIN Power Supply: External supply from VBAT (DC 12V system) Dimensions: 70×70 mm, Total height approximately 20 mm Provided as a standalone circuit board (enclosure and DIN rail mounting not supported)
Price information
It varies depending on the quantity and configuration, so please inquire. In addition to providing the circuit board alone, we can also offer it as part of an integrated device. We have demo units available for loan, so please use them for evaluation before purchase.
Price range
P3
Delivery Time
P3
※The stock status and quantity may vary. If you are in a hurry, please consult us. Demo units can be arranged with a relatively short lead time.
Applications/Examples of results
■Inspection equipment for LIN slave components (actuators, sensors, etc.) LINNEX operates as the master, passing response data from the work to the PLC. ■Inspection equipment for LIN master products (ECUs, etc.) The equipment acts as a slave, immediately returning registered response data for each ID. Response values can be rewritten from the PLC even during operation. ■Testing where the PLC determines the next content to send based on received values The PLC rewrites the transmission data by looking at the reception reports for each slot. The judgment logic can be retained in the ladder. ■If you want to align the equipment side with the other party's LIN specifications The cycle, break length, checksum method, and data length are specified from the PLC. Automatic application of standard values is not performed. ■Simultaneous control of multiple LIN buses By changing the IP address for each LINNEX, it can be collectively controlled with a single Ethernet unit of the PLC. For more details, please contact us.
Detailed information
-

Settings and commands are sent to LINNEX via Ethernet (UDP) from the PLC/PC, and communication on the LIN bus is performed. The power supply is DC 12-24V (input isolated), and the LIN bus power supply (VBAT, DC 12V system) is supplied externally. The board has a size of 70×70mm and can be integrated into a control panel.
-

If the work is a slave (actuator/sensor), the equipment side sends a header as a master and reports the response to the PLC. If the work is a master (such as an ECU), the equipment side can choose to either "respond immediately with registered data" or "receive and forward to the PLC" as a slave for each ID. It can be switched with a single basic setting, and it supports both with the same board and the same UDP frame format.
-

The slot time is measured by the built-in hardware timer of LINNEX. The PLC simply sends a transmission command when it sees a received report indicating that the value to be sent has changed. Commands that arrive before the start of the next slot are reflected from that slot, while commands that do not arrive in time are reflected when the next turn for that ID comes up, and in both cases, the schedule does not stop. The received report also includes the remaining time until the next slot starts.
-

We are offering the Windows application "LINNEX Control" for settings, operation, and monitoring free of charge. It allows you to manage a list of transmissions and receptions (with timestamps in 10µs units and judgments), the latest values by ID, ID filtering, CSV saving, statistics, and firmware updates all in one. While operating with a PLC, you can also receive and display copies of messages on a separate PC.
-

By assigning different IP addresses to multiple LINNEX units, a single PLC Ethernet unit can control multiple LIN buses collectively. The LINNEX units on the network can be searched collectively from a PC. Please determine the number of units based on actual equipment.
catalog(4)
Download All CatalogsCompany information
It was good to place an order for the equipment, but the control design and mechanical design have separate points of contact. Have you ever experienced difficulties with time loss and communication due to a lack of coordination? At Sunpro System, we provide a consistent service from design to development and equipment setup. This allows for reduced production time, lower costs, and smoother communication.


![Updating and partial renovation work of existing control panels [PLC replacement, space-saving, etc.]](https://image.mono.ipros.com/public/product/image/c88/2001504466/IPROS8405934061784940033.jpg?w=280&h=280)