Rubber chip tiles, rubber chips, elastic pavement, rubber chip safety mats.
Ryle safety mat, cushion mat, rubber chip tile, rubber chip elastic pavement, rubber chip slope.
Rubber chips provide excellent cushioning, reducing strain on the knees and lower back, and minimizing impact during falls to ensure safety!
【Type/Features】 ●Lyle A soft flooring material made by bonding finely crushed rubber chips with adhesive. The two-layer type uses sponge chips in the lower layer to further enhance cushioning (the 10mm type is only available in a single layer). ●Safety Mat The safety mat is not only installed in the safety zones of play equipment but can also be partially laid for purposes such as preventing digging under slides and swings. It is a shock-absorbing mat made from finely crushed rubber chips bonded with a special polymer. ●Stair Ramps Ramps made from rubber chips that absorb unpleasant sounds and provide a soft feel for use. ●Rubber Block (Rubber Curb) A product made from recycled chips that have been finely crushed and thermally molded with a special polymer. It possesses the rubber properties of elasticity and shock absorption, ensuring high safety. ●Surrounding Materials Using surrounding materials at the edges where Lyle is installed results in a beautiful finish. Steps can be used in areas with elevation changes, emphasizing the edge lines, while ramps can be used on flat surfaces to eliminate height differences. ●Rubber Chip Elastic Pavement is a site-constructed type of mat based on rubber chips.
Inquire About This Product
basic information
【Rubber Chip Tiles】 Rubber chip tiles have cushioning properties and are permeable. Rubber chip tiles and cushion mats are used in kindergartens, hospitals, pools, roads, etc. Additionally, since they are tiles, partial repairs are also possible. 【Rubber Chip Elastic Pavement】 Rubber chip elastic pavement is a site-installed type of mat based on rubber chips. It is a user-friendly elastic pavement that combines cushioning and safety during walking. By using colored rubber chips, the pavement can be customized to match the landscape. Compared to rubber chip tiles, it can be installed over a wide area in a shorter period of time. - Installation may not be possible depending on the substrate. - Please ensure a water slope on the substrate for drainage. - Installation is not possible in rainy weather. - Curing is required after installation. - There may be slight color variations due to manufacturing batches. - The color may differ from the actual product depending on display conditions and usage. - Fading may occur depending on the environment of use. - We do not sell materials or equipment. ■ For details, please check from [Contact Us] ■
Price information
Made-to-order products We will provide a quote based on specifications, quantity, and delivery location each time.
Delivery Time
Applications/Examples of results
○ Kindergarten/Preschool ○ Nursing Home ○ School ○ Flooring that requires elasticity ○ Shock reduction during falls due to elasticity ○ Step-free ramp *For details, please check "Contact Us."*
Detailed information
-
Rubber chip tile with taper safety mat (with taper on one side) Safety mat 500 square slope 30: 30mm × 500mm × 500mm, color two-layer, weight 6.2kg/piece Safety mat 500 square slope 40: 40mm × 500mm × 500mm, color two-layer, weight 8.4kg/piece
-
Rubber chip elastic pavement, single-color pavement 10mm Paved for a nursery school dog run
-
Rubber chip elastic pavement color-coded pavement
-
Rubber chip border piece for level difference elimination, available in two types: 17t and 25t.
-
Rubber Chip Curb Eco Lock Guard This is a long-type rubber curb. It excels in shock absorption and gently protects sandpits and flower beds. Additionally, it can be easily bent by hand, making the installation of curved sections simple. Features Workability: The long-type can be easily bent by hand, allowing for simple installation by creating bends that fit the site and securing them. (Minimum bending radius R = approximately 2,000 mm) Safety: It excels in shock absorption, reducing injuries from falls on uneven surfaces. Durability: The surface material uses weather-resistant EPDM colored rubber (solid). Material: Surface material… EPDM solid color (embossed surface) Core material… Recycled rubber chips (foam rubber) Colors: Green, Brick, Brown Adhesive (sold separately) 5kg, 16kg Usage guide: 5kg… 10 square meters, 16kg… 30 square meters - Use anchor type for curved installations - The anchor installation type comes with a dedicated cap. - Anchors are not included. Eco Lock Guard 60 Adhesive type/Anchor type 60mm × 100mm × 1500mm Eco Lock Guard 100 Adhesive type/Anchor type 100mm × 100mm × 1500mm
-
Rubber Chip Curb Rubber Block This is a rubber curb made by thermally molding recycled rubber chips with a special polymer. It can be used as a divider in gardening or as decorative blocks for concrete. Material: Colored chips Colors: Colored Green, Colored Brown, Colored Gray It will match the colors of the colored safety mats (rubber chip tiles). Installation method: Fixed with adhesive - This is a made-to-order product. - It does not support curved installations. In such cases, please use Eco Lock Guard. - The colored chips may fade over time, resulting in a darker color. - There may be slight color variations due to manufacturing lots. - The color may differ from the actual product due to display conditions and usage. - Fading may occur depending on the environment of use. - Product specifications may change for improvement. Size (Height × Width × Length) H100mm × W120mm × L400mm
-
Rubber Chip Ramp This is a ramp made from rubber chips. It absorbs unpleasant sounds and can be used with a soft feel. Five height options are available. Please select the height according to the location where it will be used. If the width is insufficient, it can be connected using joining fittings. - Please avoid using it in areas where vehicles pass. 500 Square Ramp 30: 30mm × 500mm × 500mm, Color Two-Layer, 6.2kg 500 Square Ramp 40: 40mm × 500mm × 500mm, Color Two-Layer, 8.4kg Rasuro 25 Straight (without joining fittings): 25mm × 300mm × 500mm, Colored Single-Layer, 2.4kg Rasuro 50 Straight (without joining fittings): 50mm × 300mm × 500mm, Colored Single-Layer, 4.8kg Rasuro 55 Straight (without joining fittings): 55mm × 300mm × 500mm, Colored Single-Layer, 7.6kg Rasuro 70 Straight (with joining fittings): 70mm × 350mm × 500mm, Colored Single-Layer, 9.3kg Rasuro 100 Straight (with joining fittings): 100mm × 350mm × 500mm, Colored Single-Layer, 11.9kg Rasuro 100 Straight Corner (with joining fittings): 100mm × 350mm × 350mm, Colored Single-Layer, 5.4kg
-
Rubber Chip Car Stopper "Shin-Torin-kun" This is an elastic car stopper made by solidifying recycled rubber chips with a special polymer. Being made of rubber, it absorbs impact and effectively prevents the cracking commonly found in traditional concrete stoppers. Material: Rubber chips Size: Width 150mm × Length 600mm × Height 100mm Weight 6.3kg per unit *The colored chips are dyed around the black chips, and the surface paint may peel off due to abrasion, revealing the color of the black chips underneath.
-
Rubber Chip Long Sheet This is a sheet-type rubber chip mat made by bonding rubber chips together. The surface has fine irregularities that make it slip-resistant, and the mat excels in cushioning and water permeability, making it suitable for use in kindergartens, hospitals, and other facilities. The cushion mat can be easily cut on-site, and its roll format helps reduce installation time. - It has excellent shock absorption, reducing strain on the feet. - Made from rubber chips, the surface features fine irregularities that enhance slip resistance. - With superior water permeability, it remains slip-resistant even on rainy days. Additionally, it has excellent breathability, allowing for quick drying. - The cushion mat is a long sheet type that has not been available before. It can be cut on-site to fit the required size, allowing for efficient installation on narrow slopes, stairs, balconies, etc. - The black cushion mat is an environmentally friendly recycled product made from waste tires. Material: Black... Recycled rubber Color... EPDM Thickness: 5mm, 7mm, 10mm, 15mm (15mm is made to order) Width: 1000mm, 1200mm (1200mm is made to order) Length: 5000mm Weight: Approximately 8kg/square meter (thickness 10mm)
catalog（1）
Download All Catalogs
Company information
Large Rubber Products: It is possible to mold large products using a heat press machine measuring 2m x 2m. Large mats and other items can be formed using a press machine with a heat plate of 900W x 1800L. Rubber Cord Joints: Cord products can be vulcanized and bonded using a joint press. Rubber Cord Manufacturing: Rubber cords can be produced using an extruder (automatic vulcanization). Rubber Prototyping: It is possible to create the desired shape from rubber sheets through cutting and bonding processes, starting from just one piece.
