SGP-05 type small precision gear pump (gear pump)

Added to bookmarks
Bookmarks list

Bookmark has been removed
Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration

Model number SGP-05

last updated：Oct 26, 2024

シマ技研開発　Shima Giken Kaihatsu (SHIMA TECH)

Official site

"Free demo unit rental" Achieving precise dispensing of small amounts of high-viscosity liquids in combination with stepping motors! ■ Liquid delivery for high-viscosity oils and liquid resins.

"Features of the SGP-05 Type Small Precision Gear Pump" ■ Can rotate in both forward and reverse directions. The motor must be provided by the user. We will assist in selecting the motor. ■ Capable of measuring and delivering high-viscosity liquids. ■ No pulsation. ■ Piping fittings must be provided by the user. ■ Low cost. ■ Discharge volume per revolution is 0.5 cc. ■ Not suitable for liquids containing hard fine particles. ■ Available in heat-resistant and corrosion-resistant specifications. ■ Uses two ball bearings for the bearings. ■ Speed is acceptable up to 2000 rpm. *In addition to the above, Shima products include: High-viscosity material quantitative dispensing machine (HVS: precise measurement dispensing without air entrapment) Grease cut nozzle (GCN: prevents liquid dripping and stringing) Grease shot sensor (GSS: sensor to confirm pump discharge) Small slip clutch (SLC622: slipping transmission component) and more. SGP-05A SGP-05A2 SGP-05B Oil, liquid resin, supply, delivery, pumping, lubricants, cutting fluids, adhesives, high-viscosity liquids, precision measuring pumps, micro high-precision dispensing, release agents, oil.

Inquire About This Product

basic information

(Miniature Precision Gear Pump SGP-05 Standard Specifications) 1. Application: For precise metering and discharge of high-viscosity fluids 2. Discharge volume per revolution: 0.5 cc (varies with fluid viscosity and discharge pressure) 3. Allowable discharge pressure: 1.5 MPa (15.3 kgf/cm²) 4. Allowable rotational speed: 2000 rpm 5. Shaft seal: O-ring (material: FKM) 6. Bearing: Ball bearing (load capacity is indicated in the dimensional drawing) 7. External dimensions (mm): 48W x 77H x 102D (including shaft end length of 26) 8. Weight: 700 g 9. IN/OUT piping port: PT 1/8 10. Wetted parts material: SUS 304, 303 11. Applicable liquid: Non-corrosive high-viscosity liquid with natural flowability at room temperature (free of foreign substances) 12. Liquid sealant used: Loctite 510 (Henkel Japan KK) ■ For custom specifications regarding liquid properties, please consult us. * For details, please contact us below or download the catalog. Shima Giken Development, Kazufumi Shimada, TEL 090-3821-7499 ■ We are looking for companies and individuals who can promote Shima Giken Development's products.

Price information

Prices vary depending on the quantity. A quotation will be submitted. 160°C heat-resistant specification: SGP-05A 240°C heat-resistant specification: SGP-05A2 Corrosion-resistant specification: SGP-05B

Price range

Delivery Time

Please contact us for details

※The delivery date will vary depending on the quantity and inventory status of the parts. We will submit a quotation.

Applications/Examples of results

■Operational Performance Examples - Company M: Hydraulic oil delivery (September 2021) - Company M Chemical: Edible oil delivery, 2 sets (February 2017) - For 240°C liquid resin delivery - University S, Laboratory F: For experiments - Company T: Engine oil delivery, 130°C heat-resistant specification (October 2017) - Company T: Engine oil delivery, 130°C heat-resistant specification (October 2017) - Company K Heavy Technology: 240°C heat-resistant specification (March 2019) - Company K Heavy Technology: 240°C heat-resistant specification (January 2020) - Company K Heavy Technology: 240°C heat-resistant specification (January 2023) - Company M Chemical: Standard specification (March 2019) - Company A Chemical: Standard specification (July 2016) - Company A Chemical: Standard specification (July 2020) - Company A Manufacturing: Standard specification (July 2020) - Company I Kousan: 240°C heat-resistant specification, 2 sets (July 2018) - Company I Kousan: 240°C heat-resistant specification (December 2020) - Company S Die Casting Industry: Release agent delivery (November 2021) - Company S: For coating machine (June 2021) - Company S: Standard specification for coating machine, 2 sets (March 2022) - Company SE: Standard specification (May 2022) - Company M Engineering: Standard specification (March 2023) - Company A Finetech: Standard specification (July 2024)