List of Materials products
- classification：Materials
8956～9000 item / All 37116 items
Achieves high collection efficiency through electrostatic methods. Offers a wide range of products from large to small sizes. Also compatible with water-soluble oil mist.
- air conditioning
Temporary bonding at high temperatures! Double-sided adhesive tape with a single-sided low-tack adhesive based on polyimide film.
- others
- Composite Materials
- Adhesive tape
Ultra-thin adhesive tape coated with silicone-based adhesive on a polyester substrate.
- others
- Composite Materials
- Adhesive tape
Tape with excellent lowest friction based on ultra-high molecular weight polyethylene film.
- others
- Composite Materials
- Adhesive tape
Adhesive tape made of fluoroplastic-impregnated glass cloth substrate suitable for applications requiring releasing ability.
- others
- Composite Materials
- Adhesive tape
Adhesive tape suitable for applications that dislike static electricity, such as the manufacturing process of electronic components and devices.
- others
- Composite Materials
- Adhesive tape
The base material is glass cloth impregnated with fluoroplastic, featuring a release paper specification with a maximum width of 1000mm!
- others
- Composite Materials
- Adhesive tape
Even if you stick it temporarily, it can be easily peeled off! Tape without adhesive in the center for heat sealing machines.
- others
- Composite Materials
- Adhesive tape
Self-repairing concrete screws with plating. They are more resistant to rust than SUS410 and are also more cost-effective.
- Other metal materials
- bolt
- Other consumables
Uses acrylic-based adhesive! Non-silicone adhesive fluoroplastic adhesive tape.
- others
- Composite Materials
- Adhesive tape
High-strength, low-stretch fluoroplastic (PTFE) film adhesive tape.
- others
- Composite Materials
- Adhesive tape
Adhesive tape with improved lowest friction and releasing ability achieved by performing surface unevenness processing.
- others
- Composite Materials
- Adhesive tape
Usable in environments below 250℃! Reflow transparent PEEK film adhesive tape 'xACH-5101'
- Adhesive tape
- Solder
Installation takes 1 minute per leg and removal takes 3 minutes per leg. It features triple seismic isolation to prevent vertical and horizontal shaking, along with double load-bearing effects from th...
- Rubber
Corresponds to seismic intensity 7 (equivalent to 1000 gal)! Triple seismic isolation effect to prevent vertical and horizontal shaking, with double load-bearing effect of gel and high-damping rubber ...
- Rubber
![[Earthquake Measures] What material...](https://image.mono.ipros.com/public/product/image/f2b/2000388146/IPROS79893471826951825277.jpeg?w=280&h=280){kind=small}
【BCP】Excellent quality and load-bearing capacity! For factory earthquake measures. Can be installed without anchoring! 【Video & case study collection available】
- Rubber
Introducing our commitment to the RoHS Directive for all our earthquake preparedness products! [Includes videos and case studies]
- Rubber
Maximum output of 1,300 gal; capable of testing weights up to 1 ton! Introduction of a seismic testing vibration generator (with video and case studies available).
- Rubber
Triple seismic isolation effect of the Anshin Adjuster to prevent horizontal and vertical shaking! Introduction of the suitability checklist [with video and case studies].
- Rubber
Corresponds to seismic intensity 7 (equivalent to 1000 gal) - durability of approximately 20 years. Protect equipment from earthquakes! For factory earthquake measures. Can be installed without anchor...
- Rubber
No need to worry about dust generation from drilling or positioning concerns that arise every time the layout changes! This is an earthquake-resistant product that does not require anchor bolts. [Vide...
- Rubber
Reduce internal damage caused by vertical shaking. Achieve earthquake measures for the entire factory in a space-saving manner. [Brochure & case study collection available]
- Rubber
Corresponds to seismic intensity 7! Triple seismic isolation effect to prevent vertical and horizontal shaking, with double load-bearing effect of shock-absorbing gel and high-damping rubber [Video & ...
- Rubber
Introducing the specialized adhesive "Anshin Aiba," which excels in elasticity, weather resistance, and adhesion! [Video and case study collection available]
- Rubber
Earthquake measures without drilling holes: The Anshin Adjuster can help enhance the reliability of BCP measures and assist with earthquake preparedness! [Video & case study collection available]
- Rubber
Triple seismic isolation effect to prevent horizontal and vertical shaking! Introduction of installation manual [with video and case studies].
- Rubber
Triple seismic isolation effect to prevent horizontal and vertical shaking! Introduction of installation manual [with video and case studies].
- Rubber
Triple seismic isolation effect to prevent horizontal and vertical shaking! Introduction of installation manual [with video and case studies].
- Rubber
Triple seismic isolation effect to prevent horizontal and vertical shaking! Introduction of installation manual [with video and case studies].
- Rubber
Anti-shake adjuster with triple seismic isolation effect to prevent horizontal and vertical shaking! Introduction to the construction manual.
- Rubber
Urethane gel is amazing! Basic knowledge and approaches to its challenges.
- Other polymer materials
US-type awning for entrances and doorways. Easy installation by securing nails, screws, or bolts that match the substrate!
- wood
It is a flat type for entrance, windows, terrace, and doorways. Easy to install. One-touch. Adjustable length. High-quality and highly durable direct-mounted awning.
- wood
The thermal conductivity is 185 W/(m·K)! We apply the microfabrication technology developed in the production of mechanical pencil leads!
- Ceramics
- Processing Contract
Introduction of ceramic pipes
The pilot produced pipes made of aluminum nitride (AlN), which excels in thermal conductivity among ceramics, and showcased them at the "Nagoya Manufacturing World 2022" (April 13-15, 2022, at Port Messe Nagoya). The raw ceramic powder was mixed with a binder and kneaded, then extruded and fired at temperatures between 1200 and 1500 degrees Celsius to manufacture the products. Through precise molding and uniform firing, it is possible to achieve ceramics with high density, strength, and purity. The pipes and rods that can be produced have an outer diameter ranging from 0.5 to 6 mm, an inner diameter from 0.02 to 4 mm, and a length of up to 100 mm. It is also possible to create filter-shaped micro-machining with numerous through holes in the extrusion (length) direction. So far, our ceramic products have been adopted in applications such as shafts for bearings, heat dissipation fins, and guide pins for drive components in machinery.
Can be utilized in processes that require wear resistance, insulation, and corrosion resistance. Achieves a small diameter of 0.5 to 2.0 mm.
- Ceramics
Notice of Participation in the Ceramics Product Exhibition - "11th High-Performance Ceramics Exhibition [Osaka]" from May 13 (Wed) to May 15 (Fri), 2026.
This time, Pilot Corporation will be exhibiting at the "11th Advanced Ceramics Exhibition [Osaka]" held at Intex Osaka. We will manufacture precision ceramics rods and pipes with an outer diameter of φ8 or less and an inner diameter of φ0.02 based on customer drawings, utilizing the extrusion molding technology developed with our sharp cores. The materials used will be high-purity alumina, zirconia, and aluminum nitride. We will display a variety of actual samples in different sizes and shapes. We look forward to welcoming you with our utmost preparations, and we kindly ask for your visit.
For controlling the flow rate of gases and liquids. Achieving stable flow and reduced pressure loss.
- Ceramics
Notice of Participation in the Ceramics Product Exhibition - "11th High-Performance Ceramics Exhibition [Osaka]" from May 13 (Wed) to May 15 (Fri), 2026.
This time, Pilot Corporation will be exhibiting at the "11th Advanced Ceramics Exhibition [Osaka]" held at Intex Osaka. We will manufacture precision ceramics rods and pipes with an outer diameter of φ8 or less and an inner diameter of φ0.02 based on customer drawings, utilizing the extrusion molding technology developed with our sharp cores. The materials used will be high-purity alumina, zirconia, and aluminum nitride. We will display a variety of actual samples in different sizes and shapes. We look forward to welcoming you with our utmost preparations, and we kindly ask for your visit.
It is possible to manufacture small-diameter rods and fine-pore pipe shapes.
- Ceramics
Notice of Participation in the Ceramics Product Exhibition - "11th High-Performance Ceramics Exhibition [Osaka]" from May 13 (Wed) to May 15 (Fri), 2026.
This time, Pilot Corporation will be exhibiting at the "11th Advanced Ceramics Exhibition [Osaka]" held at Intex Osaka. We will manufacture precision ceramics rods and pipes with an outer diameter of φ8 or less and an inner diameter of φ0.02 based on customer drawings, utilizing the extrusion molding technology developed with our sharp cores. The materials used will be high-purity alumina, zirconia, and aluminum nitride. We will display a variety of actual samples in different sizes and shapes. We look forward to welcoming you with our utmost preparations, and we kindly ask for your visit.
Ceramics such as zirconia and aluminum nitride can be manufactured, focusing on high-purity alumina.
- Ceramics
Notice of Participation in the Ceramics Product Exhibition - "11th High-Performance Ceramics Exhibition [Osaka]" from May 13 (Wed) to May 15 (Fri), 2026.
This time, Pilot Corporation will be exhibiting at the "11th Advanced Ceramics Exhibition [Osaka]" held at Intex Osaka. We will manufacture precision ceramics rods and pipes with an outer diameter of φ8 or less and an inner diameter of φ0.02 based on customer drawings, utilizing the extrusion molding technology developed with our sharp cores. The materials used will be high-purity alumina, zirconia, and aluminum nitride. We will display a variety of actual samples in different sizes and shapes. We look forward to welcoming you with our utmost preparations, and we kindly ask for your visit.
For shaping, events, DIY, cushioning materials, etc.! Extra large size of 530 x 920 x 1,830mm.
- plastic
- Cushioning material
- Food boxes, packaging materials, and cushioning materials
Dust, pollen, and yellow sand can be easily cleaned with just water! The self-cleaning effect of the super hydrophilic coating eliminates the need for cleaning exterior windows!
- Coating Agent
- Other cleaning tools
- Glass
Super large 500 x 1000 x 2000mm! Japan-made insulated expanded polystyrene block (JIS A 9521 certified)
- plastic
- Cushioning material
![[Free Sample Available!] Domestic P...](https://image.mono.ipros.com/public/product/image/b50/2000714414/IPROS15142736065028237541.JPG?w=280&h=280){kind=small}
[FSC Certified Products] Proven adoption by high-end European brands! Domestic paper straws that reduce the amount of plastic used and waste generated.
- Paper and pulp
[Domestic stock available] Please pay attention to the low level of impurities and the short lead time!
- Chemicals
- others
We own our own mines and are certified by the LBMA (London Bullion Market Association).
- Other semiconductors
- Other metal materials
- Non-ferrous metals
Paintable with a roller! Diatomaceous earth that doesn't require trowel application.
- paint
- Organic Natural Materials
Customization design is possible to be compatible with the resin you are considering for use!
- Other polymer materials