List of Measurement and Analysis products
- classification：Measurement and Analysis
9136～9150 item / All 53541 items
For those who have isolators. Achieving high chemical resistance and workability. Low cost and short delivery times are also possible for glove box and isolator gloves.
- Work gloves
Notice of participation in 'INTERPHEX Week Tokyo' from May 20 (Wednesday) to May 22 (Friday), 2026.
Ito Corporation will be exhibiting at "INTERPHEX Week Tokyo" held at Makuhari Messe. This exhibition is the largest in Japan, showcasing a wide range of products and services related to the research and manufacturing of pharmaceuticals, cosmetics, and regenerative medicine from 25 countries and regions around the world. Pharmaceutical and cosmetic manufacturers, as well as regenerative medicine companies, will be attending from all over the globe. We will be showcasing "Gloves for Glove Boxes/Isolators" manufactured by Tron Power. We look forward to your visit.
Measure the change state with a 3D shape measuring device! Visually confirm the indented shape and amount due to pressure.
- Analysis Services
- Analytical Equipment and Devices
Observation of thermal deformation using a 3D shape measuring machine (VR-6200)
This is a measuring device that can non-contact measure surface shapes such as concavities, undulations, and surface roughness. We will introduce "heating deformation observation" using a 3D shape measuring machine. First, we acquire a 3D texture image at room temperature, and then we acquire a 3D texture image in the heated state. By overlaying the texture images before and after heating and checking the differential texture image and cross-sectional profile, it can be seen that the substrate in the heated state has higher ends and a lower center compared to the room temperature state.
Introducing how to differentiate the use of FT-IR and GC/MS when conducting component analysis!
- Other analysis and evaluation services
- Contract Analysis
- Ingredient analysis
Component analysis of organic matter (FT-IR and GC/MS)
Our "component analysis of organic substances" often utilizes FT-IR and GC/MS. In FT-IR measurements, it is possible to analyze the main components of organic substances by comparing the IR spectrum of known substances. Additionally, if you want to analyze not only the main components of unknown substances but also trace amounts of organic substances such as additives, we recommend conducting GC/MS measurements.
We conducted measurements to reconfirm the temperature at which heat is generated during hardening!
- Other measurement, recording and measuring instruments
About the curing temperature of epoxy resin free from hazardous substances.
We conducted measurements to reconfirm the temperature of heat generation during curing, following the change to a non-toxic epoxy resin. When using a large amount of resin, we apply heat generation prevention treatment for resin embedding. Without this treatment, the temperature can rise up to 138°C during curing. However, by applying the heat generation prevention treatment even with a large amount of resin, we were able to keep the heat generation during curing within 30°C.
We will select the appropriate extensometer according to the measurement target, so please feel free to consult with us.
- Other Testing Contract
- Contract measurement
Poisson's ratio measurement
At Aites Co., Ltd., we conduct "Poisson's ratio measurement." Poisson's ratio is the ratio of longitudinal to lateral strain that occurs when a load is applied to an object, and it is necessary for strength calculations of materials. In the downloadable materials, we introduce the results of attaching strain gauges to test specimens, applying tensile loads using a universal testing machine, and examining the longitudinal and lateral strains obtained from the strain gauges. Please feel free to download and take a look.
We present the results of DMA measurements conducted on CFRP made of plain-woven carbon fiber with an epoxy resin matrix!
- Contract measurement
- Other measurement and measuring equipment
Dynamic viscoelasticity measurement of CFRP.
We would like to introduce the dynamic viscoelastic measurement of CFRP conducted by our company using the bending mode. When performing dynamic viscoelastic measurements using DMA, CFRP is generally highly elastic, and it is considered that measurements using the bending mode are suitable due to its applications. The deformation modes of DMA can measure in any mode as long as the size requirements are met, but it is ideal to select appropriate conditions based on the material's shape, elastic modulus, and the purpose of the measurement. If you have any subjects for which you would like to measure dynamic viscoelasticity, please feel free to consult us. 【Measurement Modes】 ■ Tensile ■ Compression ■ Bending (Two-point/One-point/Three-point) ■ Shear
Observation of samples and elemental analysis are possible! It can be utilized not only in the semiconductor and electronic components fields but also in life sciences and biological fields.
- Electron microscope
Analysis of organic-inorganic composite materials using FT-IR and EDX.
We will introduce an example of analyzing organic-inorganic composite materials using FT-IR and SEM-EDX. FT-IR measurements were conducted on the glossy and non-glossy areas of a PET bottle label, and the IR spectra differed between the glossy and non-glossy areas. Since the non-glossy area resembles the spectrum of acrylic resin, it is considered that the main component is acrylic resin. Additionally, SEM-EDX measurements were performed on both the glossy and non-glossy areas, and EDX spectra and backscattered electron images were obtained, revealing that the non-glossy area contained sulfur (S) and barium (Ba), which were not detected in the glossy area.
Fine cracks are easy to see! No conductive treatment is required, allowing for quick and detailed observation.
- Electron microscope
- Contract Analysis
- Contract Inspection
Devices that require operation in high-temperature conditions! Introducing latch-up testing at high temperatures.
- Testing Equipment and Devices
- Contract measurement
- Other contract services
We will suggest appropriate analysis methods based on the condition of polymer materials and samples!
- Contract Analysis
- Analysis Services
- Contract Analysis
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
Distinguish and identify compounds with similar structures! You can obtain information such as the number of protons and structural characteristics.
- Contract Analysis
- Analysis Services
- Contract Analysis
NMR analysis of liquid crystal compounds
At Aites Co., Ltd., we conduct "NMR analysis of liquid crystal compounds." NMR is an analytical method that reveals the connections between atoms that make up a molecule, and it is used alongside mass spectrometry and infrared spectroscopy for determining the structure of compounds. In the downloadable materials, we highlight the 1H NMR, 13C NMR, and DEPT measurements of 4-butoxy-4'-cyanobiphenyl (CAS number 52709-87-2), which is used as a liquid crystal component, and introduce the information obtained from NMR. Please feel free to download and take a look.
It is possible to analyze resin materials and evaluate the characteristics that affect product performance!
- Contract Analysis
- Analysis Services
- Contract Analysis
Investigation of the joint condition and joining methods of crimp terminals, as well as the types of materials! Introduction to cross-sectional observation and elemental analysis using SEM/EDX.
- Contract Analysis
- Contract measurement
- Contract Inspection
Observation of metallic tissue through chemical treatment.
We will introduce the observation of metallic structures through chemical treatment. By performing chemical treatment on metallic samples, it is possible to clearly observe the metallic structure. Observing the structure can reveal the condition of the sample and the history of applied heat and stress, providing clues about the quality of the product and any defects based on the structure's shape. In the catalog, you can find details on the observation of metallic structures, such as the macrostructure of aluminum plates and the soldered parts of copper terminals. Additionally, we offer other services such as cross-sectional observation and various analysis services. Please feel free to contact us if you have any requests.
Introducing a test that allows for the observation of fracture and delamination layers by permeating coloring liquids and fluorescent liquids!
- Contract Analysis
- Contract measurement
- Contract Inspection
Evaluation of various implementation substrates
At Aites Co., Ltd., we provide a wide range of technical services for evaluation tests of printed circuit boards (mounted boards) equipped with electronic components. We conduct reliability tests, solder joint observations, whisker observations, and cross-sectional observations. We have IPC-A-610 certified IPC specialists on staff who can assist with observations in accordance with international standards, consultations, and various observation-related concerns. Additionally, we offer services such as X-ray observations, appearance inspections, and shape measurements, so please feel free to consult with us when needed.
Introducing a case study on the cross-section preparation of a large sample (65mm × 28mm) and the observation of its internal structure!
- Other contract services
- Contract Analysis
- Contract Inspection
Observation of metallic tissue through chemical treatment.
We will introduce the observation of metallic structures through chemical treatment. By performing chemical treatment on metallic samples, it is possible to clearly observe the metallic structure. Observing the structure can reveal the condition of the sample and the history of applied heat and stress, providing clues about the quality of the product and any defects based on the structure's shape. In the catalog, you can find details on the observation of metallic structures, such as the macrostructure of aluminum plates and the soldered parts of copper terminals. Additionally, we offer other services such as cross-sectional observation and various analysis services. Please feel free to contact us if you have any requests.
For transparent materials such as glass and ITO! Measurement and evaluation of various transparent resins before and after UV exposure are also possible.
- Analysis Services
- Other contract services
- Contract measurement
Optical film light transmission characteristics
At Aites Co., Ltd., we conduct "optical film analysis." Optical films used in smartphones and other devices have various functions depending on their structure and materials. We measured the light transmittance of privacy protection films at different angles and combined cross-sectional observation with Raman analysis to investigate the mechanism of function manifestation. By investigating the transmittance characteristics of privacy protection films using angle-variable spectrophotometry, we were able to analyze the mechanism of function manifestation through cross-sectional observation and Raman analysis. At Aites, we provide consistent evaluation and analysis from material properties to the mechanisms of function manifestation.