List of Measurement and Analysis products
- classification：Measurement and Analysis
8686～8730 item / All 53321 items
For those who have isolators. Achieving high chemical resistance and workability. Low cost and short delivery times are also possible for glove box and isolator gloves.
- Work gloves
Notice of participation in 'INTERPHEX Week Tokyo' from May 20 (Wednesday) to May 22 (Friday), 2026.
Ito Corporation will be exhibiting at "INTERPHEX Week Tokyo" held at Makuhari Messe. This exhibition is the largest in Japan, showcasing a wide range of products and services related to the research and manufacturing of pharmaceuticals, cosmetics, and regenerative medicine from 25 countries and regions around the world. Pharmaceutical and cosmetic manufacturers, as well as regenerative medicine companies, will be attending from all over the globe. We will be showcasing "Gloves for Glove Boxes/Isolators" manufactured by Tron Power. We look forward to your visit.
TEM (Transmission Electron Microscope) meets a wide range of requirements for observing failure sites of electronic components, length measurements, elemental analysis, crystal structure analysis, and...
- Contract Analysis
- Other semiconductors
- Other contract services
Announcement of the introduction of Talos F200E
Our company will introduce the FEI "Talos F200E" transmission electron microscope system. Compared to conventional models, the resolution for TEM and STEM has improved, and performance has been significantly enhanced, allowing for EDS analysis with four detectors. Additionally, it is equipped with features such as drift-corrected frame integration (DCFI), which accumulates multiple frames while correcting for drift.
We provide latch-up testing services to evaluate the resistance of CMOS ICs and semiconductor products containing them to latch-up destruction.
- Contract Inspection
- Other contract services
- Other inspection equipment and devices
Some overseas manufactured parts and products may have quality issues. We provide quality evaluation services for reliability testing and assessment for these.
- Contract Inspection
- Testing Equipment and Devices
- Other inspection equipment and devices
Cryogenic ion milling cross-section processing example (rubber products)
We will introduce a case where cross-sections were created and observed by method regarding the adhesive parts of the tires of pull-back cars. When conducting SEM observations of the created cross-sections, fillers present inside the rubber were confirmed. It was found that the dispersion state of the fillers and the condition of the adhesive interface were not clear with fracture by liquid nitrogen or mechanical polishing. In contrast, the cross-sections created by cryo ion milling allow for clear observation of the dispersion state of the fillers contained within the rubber and the condition of the adhesive interface with the plastic substrate.
By conducting two analyses, it is possible to obtain more detailed and accurate results!
- Vibration Testing
Introduction to Micro FT-IR
At Aites Co., Ltd., we have newly introduced "Microscopic FT-IR" this fiscal year. The "Microscopic FT-IR," which combines FT-IR and optical microscopy, allows for the measurement of tiny substances on the order of several tens of micrometers, which are difficult to measure with conventional FT-IR, using an aperture (field of view diaphragm). There are three main measurement methods for Microscopic FT-IR: "transmission method," "reflection method," and "ATR method." While the transmission method is the basic measurement method in Microscopic FT-IR measurements, the reflection method or ATR method may be more suitable depending on the shape of the sample and the feasibility of sampling.
It is possible to investigate components that cannot be identified by spectroscopy alone, as well as trace additives that cannot be detected!
- Analytical Equipment and Devices
- Spectroscopic Analysis Equipment
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
Important analysis items for performance evaluation and quality control of functional materials! Evaluation of pore size and pore distribution of non-woven sheets and membrane materials.
- Analytical Equipment and Devices
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
Observing the conductive particles from the planar direction and the cross-sectional direction! A case study confirming the degree of deformation.
- Analytical Equipment and Devices
Observation of Conductive Particle Shape in COG Implementation
We will introduce the observation of the shape of conductive particles in COG implementation. ICs and liquid crystal panels are implemented using the COG method with ACF (anisotropic conductive film). A resin ball is used as the core, and a metal layer (such as nickel or gold) for conductivity is deposited on its surface. During connection, the particles deform appropriately to electrically connect the IC and the panel. To confirm the degree of particle deformation and connection status, cross-sectional observations were conducted, revealing that the particle deformation was at a "medium" level, indicating an appropriate degree of deformation. By examining the deformation of conductive particles from both the planar and cross-sectional directions, we can explore the correlation with display defects. Please feel free to contact us for any inquiries regarding panel-related defects.
Sample 1, including comparison with Ref! Summarize and conduct candidate analytical methods.
- Contract Analysis
Analysis of organic-inorganic composite materials using FT-IR and EDX.
We will introduce an example of analyzing organic-inorganic composite materials using FT-IR and SEM-EDX. FT-IR measurements were conducted on the glossy and non-glossy areas of a PET bottle label, and the IR spectra differed between the glossy and non-glossy areas. Since the non-glossy area resembles the spectrum of acrylic resin, it is considered that the main component is acrylic resin. Additionally, SEM-EDX measurements were performed on both the glossy and non-glossy areas, and EDX spectra and backscattered electron images were obtained, revealing that the non-glossy area contained sulfur (S) and barium (Ba), which were not detected in the glossy area.
Observations before and after reliability testing and cross-sectional observations! Here are examples of observations of various implemented components.
- Analytical Equipment and Devices
Evaluation of various implementation substrates
At Aites Co., Ltd., we provide a wide range of technical services for evaluation tests of printed circuit boards (mounted boards) equipped with electronic components. We conduct reliability tests, solder joint observations, whisker observations, and cross-sectional observations. We have IPC-A-610 certified IPC specialists on staff who can assist with observations in accordance with international standards, consultations, and various observation-related concerns. Additionally, we offer services such as X-ray observations, appearance inspections, and shape measurements, so please feel free to consult with us when needed.
This year, we are introducing new additions! We will introduce the features of the three basic measurement methods.
- Other microscopes
Analysis of organic-inorganic composite materials using FT-IR and EDX.
We will introduce an example of analyzing organic-inorganic composite materials using FT-IR and SEM-EDX. FT-IR measurements were conducted on the glossy and non-glossy areas of a PET bottle label, and the IR spectra differed between the glossy and non-glossy areas. Since the non-glossy area resembles the spectrum of acrylic resin, it is considered that the main component is acrylic resin. Additionally, SEM-EDX measurements were performed on both the glossy and non-glossy areas, and EDX spectra and backscattered electron images were obtained, revealing that the non-glossy area contained sulfur (S) and barium (Ba), which were not detected in the glossy area.
It is possible to process with approximately twice the width! This significantly expands the previously localized observation range.
- Processing Contract
- Other measurement, recording and measuring instruments
Cryogenic ion milling cross-section processing example (rubber products)
We will introduce a case where cross-sections were created and observed by method regarding the adhesive parts of the tires of pull-back cars. When conducting SEM observations of the created cross-sections, fillers present inside the rubber were confirmed. It was found that the dispersion state of the fillers and the condition of the adhesive interface were not clear with fracture by liquid nitrogen or mechanical polishing. In contrast, the cross-sections created by cryo ion milling allow for clear observation of the dispersion state of the fillers contained within the rubber and the condition of the adhesive interface with the plastic substrate.
It is possible to visualize the distribution of substances within the specified plane! Suitable for evaluating the diffusion state of substances, etc.
- Other measurement, recording and measuring instruments
Micro FT-IR imaging measurement
We would like to introduce the "Microscopic FT-IR Imaging Measurement" that we conduct. It allows for the visualization of the distribution of substances as a two-dimensional image within a specified plane. It becomes possible to evaluate changes in the distribution of substances that are difficult to assess with regular point measurements through visual images.
We investigated the behavior of strain during moisture absorption and drying using a strain gauge!
- Contract measurement
Strain measurement of power module package resin.
We would like to present the results of strain measurements conducted by attaching strain gauges and thermometers to the surfaces of power modules, both in the mounted state on a circuit board and in the unmounted state. In the mounted module, a slight delay in temperature change was observed, and correspondingly, the change in strain also appeared to be delayed. This is believed to be due to the slower transfer of heat to the module when it is mounted. At Aites, we conduct temperature cycle tests and temperature-humidity cycle tests, during which we can simultaneously measure the strain occurring in the mounted components. Please feel free to consult with us.
We are equipped with a variety of devices to meet your needs, including dimension measurement of various parts and surface roughness measurement!
- Visual Inspection Equipment
- Other measurement, recording and measuring instruments
- Other contract services
Observation of thermal deformation using a 3D shape measuring machine (VR-6200)
This is a measuring device that can non-contact measure surface shapes such as concavities, undulations, and surface roughness. We will introduce "heating deformation observation" using a 3D shape measuring machine. First, we acquire a 3D texture image at room temperature, and then we acquire a 3D texture image in the heated state. By overlaying the texture images before and after heating and checking the differential texture image and cross-sectional profile, it can be seen that the substrate in the heated state has higher ends and a lower center compared to the room temperature state.
To accurately measure strain in a tensile test, measurement using a strain gauge is necessary!
- Testing Equipment and Devices
- Other Testing Contract
Poisson's ratio measurement
At Aites Co., Ltd., we conduct "Poisson's ratio measurement." Poisson's ratio is the ratio of longitudinal to lateral strain that occurs when a load is applied to an object, and it is necessary for strength calculations of materials. In the downloadable materials, we introduce the results of attaching strain gauges to test specimens, applying tensile loads using a universal testing machine, and examining the longitudinal and lateral strains obtained from the strain gauges. Please feel free to download and take a look.
By combining the VR-6200 with the heater stage, it becomes possible to visualize changes during heating.
- Contract Inspection
Observation of thermal deformation using a 3D shape measuring machine (VR-6200)
This is a measuring device that can non-contact measure surface shapes such as concavities, undulations, and surface roughness. We will introduce "heating deformation observation" using a 3D shape measuring machine. First, we acquire a 3D texture image at room temperature, and then we acquire a 3D texture image in the heated state. By overlaying the texture images before and after heating and checking the differential texture image and cross-sectional profile, it can be seen that the substrate in the heated state has higher ends and a lower center compared to the room temperature state.
We provide quick and accurate solutions based on technology and experience for quality initiatives that consider performance, reliability, disposal, and recycling from the product planning stage.
- Contract Analysis
- Contract Inspection
- Analytical Equipment and Devices
Evaluation of various implementation substrates
At Aites Co., Ltd., we provide a wide range of technical services for evaluation tests of printed circuit boards (mounted boards) equipped with electronic components. We conduct reliability tests, solder joint observations, whisker observations, and cross-sectional observations. We have IPC-A-610 certified IPC specialists on staff who can assist with observations in accordance with international standards, consultations, and various observation-related concerns. Additionally, we offer services such as X-ray observations, appearance inspections, and shape measurements, so please feel free to consult with us when needed.
In-Situ Continuous Measurement Reliability Evaluation Testing Service
- Contract Inspection
- Testing Equipment and Devices
- Other inspection equipment and devices
Observation of substrate deformation using a 3D shape measuring device (VR-6200)
I would like to introduce "Observation of Substrate Deformation Using a 3D Shape Measuring Machine." By applying pressure to the PCB substrate, referencing bending tests of plastics and PCB substrates, the change in state is measured using a 3D shape measuring machine (VR-6200). Since the measurement results can be confirmed with a color palette and line profile, it is possible to visually verify the shape and amount of deformation caused by the applied pressure.
We will identify and observe the defective areas of power devices such as diodes, MOS-FETs, and IGBTs.
- Contract Analysis
- Transistor
- Analytical Equipment and Devices
Announcement of the introduction of Talos F200E
Our company will introduce the FEI "Talos F200E" transmission electron microscope system. Compared to conventional models, the resolution for TEM and STEM has improved, and performance has been significantly enhanced, allowing for EDS analysis with four detectors. Additionally, it is equipped with features such as drift-corrected frame integration (DCFI), which accumulates multiple frames while correcting for drift.
By applying chemical etching, ion milling, and FIB processing to mechanical polishing, we will analyze various metal joints, starting with lead-free solder.
- Contract Analysis
- Other contract services
- Contract measurement
Cryogenic ion milling cross-section processing example (rubber products)
We will introduce a case where cross-sections were created and observed by method regarding the adhesive parts of the tires of pull-back cars. When conducting SEM observations of the created cross-sections, fillers present inside the rubber were confirmed. It was found that the dispersion state of the fillers and the condition of the adhesive interface were not clear with fracture by liquid nitrogen or mechanical polishing. In contrast, the cross-sections created by cryo ion milling allow for clear observation of the dispersion state of the fillers contained within the rubber and the condition of the adhesive interface with the plastic substrate.
It is possible to observe cross-sections while observing FIB processing in real time.
- Contract Analysis
- Other contract services
- Electron microscope
Power device failure location / Slice & View three-dimensional reconstruction
I will introduce the three-dimensional reconstruction of failure locations using the Slice & View function of FIB-SEM. Continuous SEM images of the structure are obtained, and the resulting images are corrected for positional misalignment between the SEM images and visualized in three dimensions using 3D construction software (Avizo). By combining the position identification technique for cross-sectioning the failure location with the Slice & View function, it is possible to obtain continuous SEM images that retain the defective state and include information before and after the abnormal area.
We provide testing services to evaluate the resistance to ESD (electrostatic discharge), which is important for the reliability of semiconductor products and electronic components that include them.
- Contract Inspection
- Other contract services
- Other inspection equipment and devices
We offer testing services to evaluate the resistance of the Charged Device Model (CDM) to ESD.
- Contract Inspection
- Other contract services
- Other inspection equipment and devices
If it is 5 micrometers or larger, foreign object IR data can be obtained.
- Contract Analysis
- Analytical Equipment and Devices
- Other contract services
Micro FT-IR imaging measurement
We would like to introduce the "Microscopic FT-IR Imaging Measurement" that we conduct. It allows for the visualization of the distribution of substances as a two-dimensional image within a specified plane. It becomes possible to evaluate changes in the distribution of substances that are difficult to assess with regular point measurements through visual images.
We will report rapid analysis results using various sampling techniques regarding foreign substances that significantly impact the yield of electronics products.
- Contract Analysis
- Analytical Equipment and Devices
- Other contract services
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
TOF-SIMS can analyze light elements and inorganic substances as well as large organic molecules.
- Analytical Equipment and Devices
- Contract Analysis
- Other contract services
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
We provide comprehensive support for customers facing reliability issues with overseas manufactured LCD displays, from reliability testing to failure analysis and material analysis.
- Contract Inspection
- Testing Equipment and Devices
- Contract Analysis
In-chamber imaging during constant temperature and humidity testing.
Our company conducts environmental testing using a constant temperature and humidity chamber with a front glass window and a camera, allowing us to capture and monitor the operational status, such as screen displays, during the tests. During environmental testing using equipment like constant temperature and humidity chambers, monitoring the condition of the test subjects with loggers (for voltage, current, resistance, temperature, etc.) is widely practiced. However, monitoring the operational status of equipment during testing can be difficult unless the test equipment is equipped with dedicated external outputs. For samples where monitoring with loggers is challenging, we combine a constant temperature and humidity chamber with a front glass window option, a camera, and monitoring software to conduct environmental tests while capturing and monitoring the condition of the test equipment.
It has high safety and can be used in various environments! Consistent analysis is possible.
- Contract Analysis
Case study of failure analysis of oxide-based all-solid-state batteries
We will introduce a case where a series of analyses from failure location identification to cross-sectional observation was conducted on oxide-based all-solid-state batteries that were destroyed by reliability testing. Thermal analysis revealed a tendency for strong heat generation on the side, and X-ray transmission observation showed a white linear contrast anomaly near the boundary where heat generation was observed in the X-ray transmission image. It is suspected that some abnormality is occurring in the white line area. When cross-sectional SEM observation was performed on the area where the anomaly was visible, layer delamination was observed. It is speculated that the positive (negative) electrode layers expanded and contracted repeatedly due to reliability testing, leading to delamination between the current collector and the electrolyte layer.
Proposals tailored to the purpose of analysis and the target object! GC/MS analysis of derivatized samples.
- Analytical Equipment and Devices
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
Testing service for plastic films using a universal testing machine (autograph) in a heated environment!
- Other services
- Strength Testing Equipment
Poisson's ratio measurement
At Aites Co., Ltd., we conduct "Poisson's ratio measurement." Poisson's ratio is the ratio of longitudinal to lateral strain that occurs when a load is applied to an object, and it is necessary for strength calculations of materials. In the downloadable materials, we introduce the results of attaching strain gauges to test specimens, applying tensile loads using a universal testing machine, and examining the longitudinal and lateral strains obtained from the strain gauges. Please feel free to download and take a look.
Suitable for analysis of glass, metal, ceramics, silicon, compound semiconductors, shallow implants, and more!
- Analytical Equipment and Devices
Dynamic SIMS
"Dynamic SIMS" is a secondary ion mass spectrometry method that can detect trace amounts of all elements (from H to U) in samples with high sensitivity, ranging from ppm to ppb. It allows for qualitative analysis and depth profiling, and additionally enables high-precision quantitative analysis using standard samples (conducted at our partner company's facility). The minimum beam diameter is approximately 30 µm, and it can be further reduced depending on the material.
The Raman spectrum reflects the functional groups of organic compounds! The curing reaction can be estimated to some extent.
- Contract Analysis
- plastic
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
Introducing examples of measurement cases for important management items in the production of lithium-ion batteries and all-solid-state batteries!
- Laser microscope
- Other measurement, recording and measuring instruments
Composition analysis of LIB cathode active materials by ICP luminescence analysis.
This presentation introduces the composition analysis of active materials in cathode materials using ICP emission analysis. The cathode material in lithium-ion batteries (LIB) is one of the important components that influence the battery's voltage and energy density, and the composition of the cathode material significantly affects the battery's performance. ICP emission analysis allows for qualitative and quantitative analysis of approximately 70 elements, primarily metal elements. In addition to composition analysis of LIB cathode materials, it can also be applied to various analyses, including qualitative and quantitative analysis of additives and impurities contained in samples, as well as quantitative analysis of substances regulated by the RoHS directive.
Observing the behavior of strain in thermal shock testing! The test materials used are FR-1 and FR-4.
- Contract Analysis
Strain measurement of power module package resin.
We would like to present the results of strain measurements conducted by attaching strain gauges and thermometers to the surfaces of power modules, both in the mounted state on a circuit board and in the unmounted state. In the mounted module, a slight delay in temperature change was observed, and correspondingly, the change in strain also appeared to be delayed. This is believed to be due to the slower transfer of heat to the module when it is mounted. At Aites, we conduct temperature cycle tests and temperature-humidity cycle tests, during which we can simultaneously measure the strain occurring in the mounted components. Please feel free to consult with us.
At the same time, we also support monitoring of power supply, temperature, and electrical items, as well as checks after extraction!
- Environmental Test Equipment
In-chamber imaging during constant temperature and humidity testing.
Our company conducts environmental testing using a constant temperature and humidity chamber with a front glass window and a camera, allowing us to capture and monitor the operational status, such as screen displays, during the tests. During environmental testing using equipment like constant temperature and humidity chambers, monitoring the condition of the test subjects with loggers (for voltage, current, resistance, temperature, etc.) is widely practiced. However, monitoring the operational status of equipment during testing can be difficult unless the test equipment is equipped with dedicated external outputs. For samples where monitoring with loggers is challenging, we combine a constant temperature and humidity chamber with a front glass window option, a camera, and monitoring software to conduct environmental tests while capturing and monitoring the condition of the test equipment.
We provide consistent evaluation and analysis from material properties to the mechanisms of their functional expression!
- Contract Analysis
Optical film light transmission characteristics
At Aites Co., Ltd., we conduct "optical film analysis." Optical films used in smartphones and other devices have various functions depending on their structure and materials. We measured the light transmittance of privacy protection films at different angles and combined cross-sectional observation with Raman analysis to investigate the mechanism of function manifestation. By investigating the transmittance characteristics of privacy protection films using angle-variable spectrophotometry, we were able to analyze the mechanism of function manifestation through cross-sectional observation and Raman analysis. At Aites, we provide consistent evaluation and analysis from material properties to the mechanisms of function manifestation.
By reconstructing a three-dimensional image of the damaged area, observe the overall structure of the destroyed object!
- 3D measuring device
Reproducing bipolar degradation through UV laser irradiation! Sample evaluation that normally takes 2 months can be completed in 2 days.
- Other inspection equipment and devices
Measuring the strain behavior of the sealing resin under thermal cycling using a strain gauge!
- Other measurement, recording and measuring instruments
Strain measurement of power module package resin.
We would like to present the results of strain measurements conducted by attaching strain gauges and thermometers to the surfaces of power modules, both in the mounted state on a circuit board and in the unmounted state. In the mounted module, a slight delay in temperature change was observed, and correspondingly, the change in strain also appeared to be delayed. This is believed to be due to the slower transfer of heat to the module when it is mounted. At Aites, we conduct temperature cycle tests and temperature-humidity cycle tests, during which we can simultaneously measure the strain occurring in the mounted components. Please feel free to consult with us.
Observation of the sensor chip surface, creating a cross-section through mechanical polishing in the mounted state, and conducting structural observation of the device!
- Analysis Services
- Analytical Equipment and Devices
Observation of tracking camera cross-section by mechanical grinding.
I would like to introduce "Cross-sectional observation of tracking camera using mechanical polishing." Regarding the structure of the tracking camera components, when viewed from above, the lens can be identified. Although it cannot be clearly seen in the X-ray image, the lens is incorporated into the convex part. Additionally, the cross-sectional structure is similar to that of an RGB sensor, featuring a back-illuminated CMOS structure. However, since color information is not necessary for the tracking camera, there is no color filter layer. A jagged uneven shape was observed on the surface of the photodiode.
Measure the change state with a 3D shape measuring device! Visually confirm the indented shape and amount due to pressure.
- Analysis Services
- Analytical Equipment and Devices
Observation of thermal deformation using a 3D shape measuring machine (VR-6200)
This is a measuring device that can non-contact measure surface shapes such as concavities, undulations, and surface roughness. We will introduce "heating deformation observation" using a 3D shape measuring machine. First, we acquire a 3D texture image at room temperature, and then we acquire a 3D texture image in the heated state. By overlaying the texture images before and after heating and checking the differential texture image and cross-sectional profile, it can be seen that the substrate in the heated state has higher ends and a lower center compared to the room temperature state.
Introducing how to differentiate the use of FT-IR and GC/MS when conducting component analysis!
- Other analysis and evaluation services
- Contract Analysis
- Ingredient analysis
Component analysis of organic matter (FT-IR and GC/MS)
Our "component analysis of organic substances" often utilizes FT-IR and GC/MS. In FT-IR measurements, it is possible to analyze the main components of organic substances by comparing the IR spectrum of known substances. Additionally, if you want to analyze not only the main components of unknown substances but also trace amounts of organic substances such as additives, we recommend conducting GC/MS measurements.
We conducted measurements to reconfirm the temperature at which heat is generated during hardening!
- Other measurement, recording and measuring instruments
About the curing temperature of epoxy resin free from hazardous substances.
We conducted measurements to reconfirm the temperature of heat generation during curing, following the change to a non-toxic epoxy resin. When using a large amount of resin, we apply heat generation prevention treatment for resin embedding. Without this treatment, the temperature can rise up to 138°C during curing. However, by applying the heat generation prevention treatment even with a large amount of resin, we were able to keep the heat generation during curing within 30°C.
We will select the appropriate extensometer according to the measurement target, so please feel free to consult with us.
- Other Testing Contract
- Contract measurement
Poisson's ratio measurement
At Aites Co., Ltd., we conduct "Poisson's ratio measurement." Poisson's ratio is the ratio of longitudinal to lateral strain that occurs when a load is applied to an object, and it is necessary for strength calculations of materials. In the downloadable materials, we introduce the results of attaching strain gauges to test specimens, applying tensile loads using a universal testing machine, and examining the longitudinal and lateral strains obtained from the strain gauges. Please feel free to download and take a look.
We present the results of DMA measurements conducted on CFRP made of plain-woven carbon fiber with an epoxy resin matrix!
- Contract measurement
- Other measurement and measuring equipment
Dynamic viscoelasticity measurement of CFRP.
We would like to introduce the dynamic viscoelastic measurement of CFRP conducted by our company using the bending mode. When performing dynamic viscoelastic measurements using DMA, CFRP is generally highly elastic, and it is considered that measurements using the bending mode are suitable due to its applications. The deformation modes of DMA can measure in any mode as long as the size requirements are met, but it is ideal to select appropriate conditions based on the material's shape, elastic modulus, and the purpose of the measurement. If you have any subjects for which you would like to measure dynamic viscoelasticity, please feel free to consult us. 【Measurement Modes】 ■ Tensile ■ Compression ■ Bending (Two-point/One-point/Three-point) ■ Shear