List of CAE products
- classification：CAE
631～645 item / All 3939 items
For those who have isolators. Achieving high chemical resistance and workability. Low cost and short delivery times are also possible for glove box and isolator gloves.
- Work gloves
Notice of participation in 'INTERPHEX Week Tokyo' from May 20 (Wednesday) to May 22 (Friday), 2026.
Ito Corporation will be exhibiting at "INTERPHEX Week Tokyo" held at Makuhari Messe. This exhibition is the largest in Japan, showcasing a wide range of products and services related to the research and manufacturing of pharmaceuticals, cosmetics, and regenerative medicine from 25 countries and regions around the world. Pharmaceutical and cosmetic manufacturers, as well as regenerative medicine companies, will be attending from all over the globe. We will be showcasing "Gloves for Glove Boxes/Isolators" manufactured by Tron Power. We look forward to your visit.
It is also possible to display various maps of each phase! Analysis is based on the information of the crystal structure possessed by the sample.
- Contract Analysis
Example of analysis of compounds at the SAC solder and Ni pad interface.
We will introduce an example of the analysis of compounds formed at the interface between Sn-Ag-Cu solder and NiP pads. At the interface of NiP pads and Sn-Ag-Cu solder, compounds such as (Ni,Cu)3Sn4 and (Cu,Ni)6Sn5 grow, and surface analysis using EDX shows the distribution of Ni, Cu, and Sn within these compounds. The EBSD method is a technique that analyzes based on the crystallographic information of the sample. By combining it with elemental analysis using EDX, it is possible to estimate the composition, and in some cases, it may be possible to analyze using crystallographic data for Ni3Sn4 and Cu6Sn5 as substitutes.
ESD/Latch-Up Test Contract Service
- Contract Analysis
Appearance inspection, electrical inspection, and internal observation using X-rays conducted! Introduction of analysis cases.
- Contract Analysis
Analysis case of faulty switch contacts
Since a malfunction was suspected in the switch section of the appliance that would not power on, we will introduce a case study along with the work flow. First, we check for any shape changes such as swelling, cracking, or discoloration through visual observation. In the electrical check, we confirm whether the malfunction can be reproduced and whether it is an open or short circuit. An internal observation using X-rays revealed that the contact terminals inside the switch had melted, scattered, and disappeared, resulting in an open failure. Ultimately, we will submit a report that includes the consideration of the cause. We also accept inquiries for analysis consultations after non-destructive testing, so please feel free to contact us.
Observation of the sensor chip surface, creating a cross-section through mechanical polishing in the mounted state, and conducting structural observation of the device!
- Analysis Services
- Analytical Equipment and Devices
Observation of tracking camera cross-section by mechanical grinding.
I would like to introduce "Cross-sectional observation of tracking camera using mechanical polishing." Regarding the structure of the tracking camera components, when viewed from above, the lens can be identified. Although it cannot be clearly seen in the X-ray image, the lens is incorporated into the convex part. Additionally, the cross-sectional structure is similar to that of an RGB sensor, featuring a back-illuminated CMOS structure. However, since color information is not necessary for the tracking camera, there is no color filter layer. A jagged uneven shape was observed on the surface of the photodiode.
Measure the change state with a 3D shape measuring device! Visually confirm the indented shape and amount due to pressure.
- Analysis Services
- Analytical Equipment and Devices
Observation of thermal deformation using a 3D shape measuring machine (VR-6200)
This is a measuring device that can non-contact measure surface shapes such as concavities, undulations, and surface roughness. We will introduce "heating deformation observation" using a 3D shape measuring machine. First, we acquire a 3D texture image at room temperature, and then we acquire a 3D texture image in the heated state. By overlaying the texture images before and after heating and checking the differential texture image and cross-sectional profile, it can be seen that the substrate in the heated state has higher ends and a lower center compared to the room temperature state.
By adding a special reagent to the sample and heating it, it becomes possible to detect substances that are usually difficult to detect!
- Analysis Services
- Contract Analysis
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
We will suggest appropriate analysis methods based on the condition of polymer materials and samples!
- Contract Analysis
- Analysis Services
- Contract Analysis
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
Distinguish and identify compounds with similar structures! You can obtain information such as the number of protons and structural characteristics.
- Contract Analysis
- Analysis Services
- Contract Analysis
NMR analysis of liquid crystal compounds
At Aites Co., Ltd., we conduct "NMR analysis of liquid crystal compounds." NMR is an analytical method that reveals the connections between atoms that make up a molecule, and it is used alongside mass spectrometry and infrared spectroscopy for determining the structure of compounds. In the downloadable materials, we highlight the 1H NMR, 13C NMR, and DEPT measurements of 4-butoxy-4'-cyanobiphenyl (CAS number 52709-87-2), which is used as a liquid crystal component, and introduce the information obtained from NMR. Please feel free to download and take a look.
It is possible to analyze resin materials and evaluate the characteristics that affect product performance!
- Contract Analysis
- Analysis Services
- Contract Analysis
For transparent materials such as glass and ITO! Measurement and evaluation of various transparent resins before and after UV exposure are also possible.
- Analysis Services
- Other contract services
- Contract measurement
Optical film light transmission characteristics
At Aites Co., Ltd., we conduct "optical film analysis." Optical films used in smartphones and other devices have various functions depending on their structure and materials. We measured the light transmittance of privacy protection films at different angles and combined cross-sectional observation with Raman analysis to investigate the mechanism of function manifestation. By investigating the transmittance characteristics of privacy protection films using angle-variable spectrophotometry, we were able to analyze the mechanism of function manifestation through cross-sectional observation and Raman analysis. At Aites, we provide consistent evaluation and analysis from material properties to the mechanisms of function manifestation.
Detect and analyze the absorption wavelengths of organic molecular groups (functional groups)!
- Contract Analysis
- Contract Analysis
- Analysis Services
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
Rich equipment and expertise! We will elucidate the molecular structures of materials in general through chemical instrument analysis!
- Analytical Equipment and Devices
- Contract Analysis
- Contract Analysis
NMR analysis of liquid crystal compounds
At Aites Co., Ltd., we conduct "NMR analysis of liquid crystal compounds." NMR is an analytical method that reveals the connections between atoms that make up a molecule, and it is used alongside mass spectrometry and infrared spectroscopy for determining the structure of compounds. In the downloadable materials, we highlight the 1H NMR, 13C NMR, and DEPT measurements of 4-butoxy-4'-cyanobiphenyl (CAS number 52709-87-2), which is used as a liquid crystal component, and introduce the information obtained from NMR. Please feel free to download and take a look.
![[Data] Measurement of resin molecul...](https://image.mono.ipros.com/public/product/image/aa5/2000728689/IPROS41773405641582805253.png?w=280&h=280){kind=small}
The analysis device also supports the analysis and evaluation of polymers! Information on the configuration and principles of high-temperature SEC equipment is provided!
- Contract measurement
- Contract Analysis
- Other analyses
Poisson's ratio measurement
At Aites Co., Ltd., we conduct "Poisson's ratio measurement." Poisson's ratio is the ratio of longitudinal to lateral strain that occurs when a load is applied to an object, and it is necessary for strength calculations of materials. In the downloadable materials, we introduce the results of attaching strain gauges to test specimens, applying tensile loads using a universal testing machine, and examining the longitudinal and lateral strains obtained from the strain gauges. Please feel free to download and take a look.
GC-MS is used for qualitative and quantitative analysis of low molecular organic substances! Data was obtained and compared using incense and sandalwood!
- Analytical Equipment and Devices
- Contract Analysis
- Other contract services
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
Depending on the panel size, it is possible to analyze using different ICP-AES/MS devices!
- Analysis Services
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.