List of Testing Equipment and Devices products
- classification：Testing Equipment and Devices
1651～1680 item / All 6664 items
For those who have isolators. Achieving high chemical resistance and workability. Low cost and short delivery times are also possible for glove box and isolator gloves.
- Work gloves
Notice of participation in 'INTERPHEX Week Tokyo' from May 20 (Wednesday) to May 22 (Friday), 2026.
Ito Corporation will be exhibiting at "INTERPHEX Week Tokyo" held at Makuhari Messe. This exhibition is the largest in Japan, showcasing a wide range of products and services related to the research and manufacturing of pharmaceuticals, cosmetics, and regenerative medicine from 25 countries and regions around the world. Pharmaceutical and cosmetic manufacturers, as well as regenerative medicine companies, will be attending from all over the globe. We will be showcasing "Gloves for Glove Boxes/Isolators" manufactured by Tron Power. We look forward to your visit.
This is a fatigue testing machine developed specifically for IC cards.
- Testing Equipment and Devices
- Strength Testing Equipment
When evaluating various factors in the pulp raw material adjustment, it is possible to create samples in small quantities under fixed conditions.
- Testing Equipment and Devices
The wear testing machine for hollow cylindrical plastic specimens can test six specimens simultaneously.
- Testing Equipment and Devices
Small film take-up machine for tabletop mixing and extrusion molding evaluation test device Laboplast Mill for micro use.
- Testing Equipment and Devices
- Extrusion Machine
Introduction to the Mixing and Extrusion Molding Evaluation Test Device "Laboplast Mill"
The "Laboplastomill" is a testing device used for evaluating processing characteristics and simulating molding using small mixers and extruders. It is widely utilized by many customers in the field of polymer materials, including thermoplastic resins, thermosetting resins, and elastomers. There are various methods for testing, but it allows measurements to be conducted under conditions close to those of actual production molding processes, enabling the acquisition of practical measurement data from a small amount of samples. For more details, please refer to the attached materials. Additionally, we have a demonstration unit at our factory, so please feel free to contact us if you wish to conduct sample testing.
It is a testing machine for evaluating the puncture impact strength of plastic films and similar materials under temperature conditions.
- Impact Test
- Testing Equipment and Devices
- Strength Testing Equipment
It is a tensile testing machine equipped with a 4-point suspension and a constant temperature chamber (temperature range 40°C to 150°C).
- Testing Equipment and Devices
- Strength Testing Equipment
- Thermostatic chamber
Introduction to the Universal Material Testing Machine "Strograph"
The "Strograph" is a versatile testing machine that conducts characteristic evaluation tests for tensile, compression, and bending strength of various materials such as plastic and rubber. It can measure the mechanical properties of test specimens, including "tensile strength, elongation, yield point, endurance limit, stress, bending load, bending strength, and bending modulus." 【What is a Tensile Test?】 The purpose of a tensile test is to understand the characteristics in relation to tensile force. This test applies tension to the sample until it fractures, measuring the mechanical properties such as tensile strength, yield point, and elongation. From these measurements, the fracture state and yield state are calculated and used for material strength calculations. 【What is a Compression Test?】 A compression test involves placing test specimens, such as rectangular prisms, cylinders, or cylindrical shapes, between two parallel plates and applying a load to determine the relationship between stress and strain until failure occurs. 【Specifications of the Strograph】 You can choose from models with a capacity ranging from 500N to 50kN. Additionally, we offer a variety of grips (chucks) depending on the samples being measured. If standard products do not meet your needs, custom solutions are also available, so please feel free to consult with us. We have demo units available at our factory, so if you wish to measure samples, please do not hesitate to contact us.
This is a testing machine that evaluates low-temperature characteristics and cold resistance by seeking elastic recovery at low temperatures for materials that require sealing properties.
- Environmental Test Equipment
- Thermostatic chamber
- Testing Equipment and Devices
William-type rubber wear testing machine
- Testing Equipment and Devices
Tabletop mixing and extrusion molding evaluation test device Laboplast Mill - small pelletizer for micro use.
- Testing Equipment and Devices
- Extrusion Machine
Introduction to the Mixing and Extrusion Molding Evaluation Test Device "Laboplast Mill"
The "Laboplastomill" is a testing device used for evaluating processing characteristics and simulating molding using small mixers and extruders. It is widely utilized by many customers in the field of polymer materials, including thermoplastic resins, thermosetting resins, and elastomers. There are various methods for testing, but it allows measurements to be conducted under conditions close to those of actual production molding processes, enabling the acquisition of practical measurement data from a small amount of samples. For more details, please refer to the attached materials. Additionally, we have a demonstration unit at our factory, so please feel free to contact us if you wish to conduct sample testing.
This is a shopper-type sample punch for collecting test specimens made of rubber and soft plastics.
- Testing Equipment and Devices
Film and sheet take-up device for the mixing and extrusion molding evaluation test apparatus Laboplast Mill.
- Testing Equipment and Devices
- Extrusion Machine
Introduction to the Mixing and Extrusion Molding Evaluation Test Device "Laboplast Mill"
The "Laboplastomill" is a testing device used for evaluating processing characteristics and simulating molding using small mixers and extruders. It is widely utilized by many customers in the field of polymer materials, including thermoplastic resins, thermosetting resins, and elastomers. There are various methods for testing, but it allows measurements to be conducted under conditions close to those of actual production molding processes, enabling the acquisition of practical measurement data from a small amount of samples. For more details, please refer to the attached materials. Additionally, we have a demonstration unit at our factory, so please feel free to contact us if you wish to conduct sample testing.
It is a testing device for measuring the compression permanent strain of rubber materials.
- Testing Equipment and Devices
This is a testing machine used to evaluate the color fastness of dyed fabrics due to friction.
- Testing Equipment and Devices
Single-screw extruder for the lab plastomill for mixing and extrusion molding evaluation tests. For thermoplastic resins.
- Testing Equipment and Devices
- Extrusion Machine
This is an impact testing machine that can automatically conduct Charpy impact tests on plastic (edgewise) in a temperature environment of -40℃ to 80℃.
- Strength Testing Equipment
- Impact Test
- Thermostatic chamber
A simple manual injection molding machine for producing test specimens. It can also be used as a pelletizer to pelletize amorphous samples mixed in a mixer.
- Testing Equipment and Devices
- Injection Molding Machine
Information on various material testing machines demo units [Toyo Seiki Seisakusho Co., Ltd.]
At Toyo Seiki Seisakusho Co., Ltd., we have demo units of various testing machines available for customers considering a purchase. Please feel free to contact us. <As of June 30, 2021> Mülehn Burst Testing Machine Strograph E3-L, VG20F, AE Elastomer (Universal Testing Machine/Tensile Compression Testing Machine) Shob Type Rebound Elasticity Testing Machine Tackiness Checker Automatic Specific Gravity Meter DSG-1 Mooney Viscometer AM-4 Rotary Rheometer RLR-4 (Curing Testing Machine) Rotary Abrasion Tester Dispersion Machine for Testing Incometer D-2 Bend Graph B-2 Mini Test Press Semi-Auto Melt Indexer 3A Melt Indexer G-01/G-02 (MFR Meter) MIT Flexural Fatigue Testing Machine D-2 Impact Testing Machine IT Friction Measuring Machine AN-S2, HM-3 Loop Steffen Test Gas Permeability Measurement Device Capillograph F-1/F-2 Cone Calorimeter Notching Tool A-4 Blow Point Tester Lab Plastomill Lab Plastomill Micro Hand Treader Thermal Conductivity Measurement Device Digital Garle Flexibility Testing Machine Fragile Permeameter
Automatically measures the 'thickness' and 'remaining width' of Charpy impact test specimens and sends the data to the impact testing machine and PC* (Note: PC is optional).
- Testing Equipment and Devices
- Impact Test
- Strength Testing Equipment
A tensile testing chuck (gripping device) with a maximum capacity of 500N to 3kN, suitable for tensile tests of rubber and other dumbbell-shaped specimens.
- Testing Equipment and Devices
- Strength Testing Equipment
Introduction to the Universal Material Testing Machine "Strograph"
The "Strograph" is a versatile testing machine that conducts characteristic evaluation tests for tensile, compression, and bending strength of various materials such as plastic and rubber. It can measure the mechanical properties of test specimens, including "tensile strength, elongation, yield point, endurance limit, stress, bending load, bending strength, and bending modulus." 【What is a Tensile Test?】 The purpose of a tensile test is to understand the characteristics in relation to tensile force. This test applies tension to the sample until it fractures, measuring the mechanical properties such as tensile strength, yield point, and elongation. From these measurements, the fracture state and yield state are calculated and used for material strength calculations. 【What is a Compression Test?】 A compression test involves placing test specimens, such as rectangular prisms, cylinders, or cylindrical shapes, between two parallel plates and applying a load to determine the relationship between stress and strain until failure occurs. 【Specifications of the Strograph】 You can choose from models with a capacity ranging from 500N to 50kN. Additionally, we offer a variety of grips (chucks) depending on the samples being measured. If standard products do not meet your needs, custom solutions are also available, so please feel free to consult with us. We have demo units available at our factory, so if you wish to measure samples, please do not hesitate to contact us.
A tensile testing chuck (gripping device) with a maximum capacity of 1kN to 3kN, suitable for tensile tests of dumbbell-shaped specimens made of rubber and similar materials.
- Testing Equipment and Devices
- Strength Testing Equipment
Introduction to the Universal Material Testing Machine "Strograph"
The "Strograph" is a versatile testing machine that conducts characteristic evaluation tests for tensile, compression, and bending strength of various materials such as plastic and rubber. It can measure the mechanical properties of test specimens, including "tensile strength, elongation, yield point, endurance limit, stress, bending load, bending strength, and bending modulus." 【What is a Tensile Test?】 The purpose of a tensile test is to understand the characteristics in relation to tensile force. This test applies tension to the sample until it fractures, measuring the mechanical properties such as tensile strength, yield point, and elongation. From these measurements, the fracture state and yield state are calculated and used for material strength calculations. 【What is a Compression Test?】 A compression test involves placing test specimens, such as rectangular prisms, cylinders, or cylindrical shapes, between two parallel plates and applying a load to determine the relationship between stress and strain until failure occurs. 【Specifications of the Strograph】 You can choose from models with a capacity ranging from 500N to 50kN. Additionally, we offer a variety of grips (chucks) depending on the samples being measured. If standard products do not meet your needs, custom solutions are also available, so please feel free to consult with us. We have demo units available at our factory, so if you wish to measure samples, please do not hesitate to contact us.
A tensile testing chuck (gripper) with a maximum capacity of 100N to 5kN, suitable for tensile tests of paper, plastic films, and the like.
- Testing Equipment and Devices
- Strength Testing Equipment
Introduction to the Universal Material Testing Machine "Strograph"
The "Strograph" is a versatile testing machine that conducts characteristic evaluation tests for tensile, compression, and bending strength of various materials such as plastic and rubber. It can measure the mechanical properties of test specimens, including "tensile strength, elongation, yield point, endurance limit, stress, bending load, bending strength, and bending modulus." 【What is a Tensile Test?】 The purpose of a tensile test is to understand the characteristics in relation to tensile force. This test applies tension to the sample until it fractures, measuring the mechanical properties such as tensile strength, yield point, and elongation. From these measurements, the fracture state and yield state are calculated and used for material strength calculations. 【What is a Compression Test?】 A compression test involves placing test specimens, such as rectangular prisms, cylinders, or cylindrical shapes, between two parallel plates and applying a load to determine the relationship between stress and strain until failure occurs. 【Specifications of the Strograph】 You can choose from models with a capacity ranging from 500N to 50kN. Additionally, we offer a variety of grips (chucks) depending on the samples being measured. If standard products do not meet your needs, custom solutions are also available, so please feel free to consult with us. We have demo units available at our factory, so if you wish to measure samples, please do not hesitate to contact us.
A tensile testing chuck (gripping device) with a maximum capacity of 1kN to 20kN, suitable for tensile tests of materials such as plastic.
- Testing Equipment and Devices
- Strength Testing Equipment
Introduction to the Universal Material Testing Machine "Strograph"
The "Strograph" is a versatile testing machine that conducts characteristic evaluation tests for tensile, compression, and bending strength of various materials such as plastic and rubber. It can measure the mechanical properties of test specimens, including "tensile strength, elongation, yield point, endurance limit, stress, bending load, bending strength, and bending modulus." 【What is a Tensile Test?】 The purpose of a tensile test is to understand the characteristics in relation to tensile force. This test applies tension to the sample until it fractures, measuring the mechanical properties such as tensile strength, yield point, and elongation. From these measurements, the fracture state and yield state are calculated and used for material strength calculations. 【What is a Compression Test?】 A compression test involves placing test specimens, such as rectangular prisms, cylinders, or cylindrical shapes, between two parallel plates and applying a load to determine the relationship between stress and strain until failure occurs. 【Specifications of the Strograph】 You can choose from models with a capacity ranging from 500N to 50kN. Additionally, we offer a variety of grips (chucks) depending on the samples being measured. If standard products do not meet your needs, custom solutions are also available, so please feel free to consult with us. We have demo units available at our factory, so if you wish to measure samples, please do not hesitate to contact us.
Friction coefficient measurement fixture
- Testing Equipment and Devices
- Strength Testing Equipment
Fixture for 90-degree peel strength testing of adhesive tapes.
- Testing Equipment and Devices
- Strength Testing Equipment
It is a system that attaches a load cell to the hammer impact blade (Charpy impact test) and the specimen support platform (tensile impact test) to measure the shock waveform.
- Impact Test
- Strength Testing Equipment
- Testing Equipment and Devices
This is a measuring device used to check the notch height (remaining width after the notch) of test specimens used in Charpy Izod tensile impact tests.
- Testing Equipment and Devices
- Other measurement, recording and measuring instruments
- Impact Test
The barrel can be disassembled into two parts! Compatible with thermosetting resin! The cylinder section and feed section can be cooled!
- Testing Equipment and Devices
It makes the filling of samples into the melt-in deck easier and faster.
- Testing Equipment and Devices
This is a melt indexer capable of multi-weight measurement as specified by ASTM D1238 Method D, in addition to standard single weight measurement.
- Testing Equipment and Devices
- Other measurement, recording and measuring instruments
- Analytical Equipment and Devices
Information on various material testing machines demo units [Toyo Seiki Seisakusho Co., Ltd.]
At Toyo Seiki Seisakusho Co., Ltd., we have demo units of various testing machines available for customers considering a purchase. Please feel free to contact us. <As of June 30, 2021> Mülehn Burst Testing Machine Strograph E3-L, VG20F, AE Elastomer (Universal Testing Machine/Tensile Compression Testing Machine) Shob Type Rebound Elasticity Testing Machine Tackiness Checker Automatic Specific Gravity Meter DSG-1 Mooney Viscometer AM-4 Rotary Rheometer RLR-4 (Curing Testing Machine) Rotary Abrasion Tester Dispersion Machine for Testing Incometer D-2 Bend Graph B-2 Mini Test Press Semi-Auto Melt Indexer 3A Melt Indexer G-01/G-02 (MFR Meter) MIT Flexural Fatigue Testing Machine D-2 Impact Testing Machine IT Friction Measuring Machine AN-S2, HM-3 Loop Steffen Test Gas Permeability Measurement Device Capillograph F-1/F-2 Cone Calorimeter Notching Tool A-4 Blow Point Tester Lab Plastomill Lab Plastomill Micro Hand Treader Thermal Conductivity Measurement Device Digital Garle Flexibility Testing Machine Fragile Permeameter
It is a specialized machine for conducting tensile and compression tests on various materials under temperature conditions. Compared to a standard universal testing machine equipped with a constant te...
- Thermostatic chamber
- Environmental Test Equipment
- Strength Testing Equipment
Introduction to the Universal Material Testing Machine "Strograph"
The "Strograph" is a versatile testing machine that conducts characteristic evaluation tests for tensile, compression, and bending strength of various materials such as plastic and rubber. It can measure the mechanical properties of test specimens, including "tensile strength, elongation, yield point, endurance limit, stress, bending load, bending strength, and bending modulus." 【What is a Tensile Test?】 The purpose of a tensile test is to understand the characteristics in relation to tensile force. This test applies tension to the sample until it fractures, measuring the mechanical properties such as tensile strength, yield point, and elongation. From these measurements, the fracture state and yield state are calculated and used for material strength calculations. 【What is a Compression Test?】 A compression test involves placing test specimens, such as rectangular prisms, cylinders, or cylindrical shapes, between two parallel plates and applying a load to determine the relationship between stress and strain until failure occurs. 【Specifications of the Strograph】 You can choose from models with a capacity ranging from 500N to 50kN. Additionally, we offer a variety of grips (chucks) depending on the samples being measured. If standard products do not meet your needs, custom solutions are also available, so please feel free to consult with us. We have demo units available at our factory, so if you wish to measure samples, please do not hesitate to contact us.
Film, rubber, and fabric thickness gauge
- Testing Equipment and Devices
- Other measurement, recording and measuring instruments
- Coating thickness gauge