Information on various material testing machines demo units [Toyo Seiki Seisakusho Co., Ltd.]

This is a digital display and semi-automatic operation Mühlen burst testing machine.

● There are low-pressure and high-pressure types of the Mullen burst tester, which evaluates the burst strength of materials such as paper and textiles. ● The M2 model achieves semi-automatic operation by adopting digital technology. Measurement is simple; just insert the test specimen and press the start switch. ● It is equipped with various safety devices, including a finger pinch prevention device, a glycerin splash prevention device, an overload prevention device, and an automatic return device for idle operation.

• Testing Equipment and Devices
• Strength Testing Equipment

It is an analog type Mullen burst testing machine (Mullen type burst strength testing machine).

The Mullen burst tester, which evaluates the burst strength of materials such as paper and textiles, comes in low-pressure and high-pressure types. The E type is the conventional analog type. The low-pressure type is used for tests up to 2500 kPa, while the high-pressure type is used for tests exceeding that pressure.

• Testing Equipment and Devices
• Strength Testing Equipment

This is a tabletop universal testing machine with a maximum load capacity of 1 kN. The E3-L can accommodate specimens with large elongation.

● It is compact and can be installed in a space-saving manner. ● The E3-L is suitable for strength testing of materials with high elongation, such as rubber and plastic films. ● The E3-S is suitable for strength testing of electronic components and packaging materials, syringe resistance testing, and food texture testing. ● You can choose from a wide lineup of chucks (gripping tools) and fixtures.

• Testing Equipment and Devices
• Strength Testing Equipment

It is a universal material testing machine with a maximum load capacity of 20 kN.

■ It is possible to conduct physical property evaluation tests such as tensile strength, compressive strength, and bending strength of a wide range of materials including plastics and rubber. ■ You can choose from a rich lineup of chucks (gripping tools) and fixtures. ■ Measurements can be taken from tensile modulus* to fracture elongation. (Note: A high-precision extensometer is required as an option.) ■ Stroke extension (300mm or 600mm) is also available as an option.

• Testing Equipment and Devices
• Strength Testing Equipment

This is a testing machine that automatically conducts tensile tests on soft materials such as elastomers.

● By setting the test specimens on the tray, all processes from dimension measurement ⇒ chucking ⇒ gauge length extension measurement ⇒ removal of test specimens ⇒ data processing will be performed automatically. ● Continuous testing of 120 test specimens is possible. It contributes to labor-saving, efficiency improvement, and enhanced reproducibility in measurement tasks. ● A non-contact* (laser type) gauge length extension meter is available as an option. ● Compact space-saving design.

• Testing Equipment and Devices
• Strength Testing Equipment

This is a device for measuring the rebound resilience of rubber in accordance with JIS K 6255.

The rebound angle of the sample will be measured, and the rebound elasticity will be calculated. The maximum, minimum, central, and average values will be processed.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

This is a portable adhesive testing machine that measures the adhesive properties (tack value) of non-sulfurized rubber, adhesive tapes, and the like. It allows for easy measurement of the adhesive strength of materials on-site.

In the molding process of tires and belts, where rubber components and reinforcing materials are adhered together in layers and vulcanized, it is very important to confirm the adhesiveness of the components in advance. This device has been developed as a tool to easily measure the adhesive strength of components on-site and can also be applied to measure the adhesive strength of tapes and similar materials. The ambient temperature at the site changes with the seasons, which also affects adhesiveness. The Tackiness Checker allows for easy measurement of adhesive strength on-site.

• Viscometer
• Testing Equipment and Devices
• Strength Testing Equipment

This is a testing machine for measuring the viscosity of unvulcanized rubber and the scorch time of the rubber.

● The Mooney value is automatically calibrated with a built-in weight. ● You can register test conditions and pass/fail criteria. ● Test results can be output to a PC* (optional). ● You can recall past test results (up to 100 data). ● The heater timer function allows for time savings at the start and end. ● It is equipped with overload prevention and overheat prevention devices.

• Viscometer
• Testing Equipment and Devices

This is a device for pressing adhesive tape against a test plate during the adhesive strength test of adhesive tape, based on JIS Z 0237.

A roller with a mass of 2 kg is moved back and forth at a speed of 10 ± 0.5 mm/sec to press the sample onto the test plate. ● Compact tabletop design that does not take up much space. ● A sample mounting fixture that minimizes air entry between the sample and the test plate is included as standard. ● Comes with a roller resting fixture for when not in use.

• Testing Equipment and Devices
• Strength Testing Equipment

This is a vulcanization testing machine (rotorless rheometer/MDR) for evaluating the vulcanization characteristics of rubber. Fully automated testing is also possible with the optional sample automatic loading and unloading device.

● The sample chamber die can be selected in addition to the flat die specification, also in a conical die specification. ● By installing the automatic sample loading and unloading device* (pin type or film type) and the data processing device*, full automation (continuous testing of 84 samples) is possible. This contributes to labor-saving and efficiency in measurement tasks. (*Optional) ● By installing options for foam pressure measurement and tan δ measurement functions, you can obtain more physical properties of rubber. *The photo includes the automatic sample loading and unloading device (optional).

• Testing Equipment and Devices

This is a disperser (paint shaker, paint conditioner, shaker) used for evaluating the dispersibility of pigments used in paints and inks.

We will vibrationally blend pigments and glass beads in a glass container and compare their dispersibility.

• Emulsifier/Disperser
• Sieve/Shaker
• Testing Equipment and Devices

In the most common wear test for flat materials, the wear of the contact surface with two wear wheels is evaluated by the reduction in mass, thickness, and gloss.

It is the most common method for wear testing of flat materials, evaluating the wear degree of the contact surface with two wear rings based on changes in mass, thickness, and gloss. We have various types of wear rings available.

• Testing Equipment and Devices
• Strength Testing Equipment

This is a testing machine for evaluating the tackiness (tack value) of ink and misting.

The behavior of the ink film separating between rolls on a printing machine is significantly influenced by the characteristics of the ink, making it one of the important factors in evaluating printability. The inkometer is a device that models the functions of each roll on the printing machine and measures the tack of the ink that appears here. Tack is a property related to the viscosity of the ink, representing its adhesiveness, and is closely related to the surface strength of the paper and trapping, among other factors. ● Operator name (up to 20 characters), sample name (up to 80 characters), and test conditions (up to 50 characters) can be registered. ● The removal of the top roll and vibration roll has become easier.

• Viscometer
• Testing Equipment and Devices

If you set the test specimen in the cassette, all processes from measuring the test specimen to chucking, bending measurement, removing the test specimen, and data processing will be performed automatically.

■140 test specimens can be tested continuously. (※In the case of a thickness of 4mm) ■Contributes to labor-saving, efficiency improvement, and enhanced reproducibility of measurement work. ■A direct deflection measurement system (optional) is available. ■Compact space-saving design.

• Testing Equipment and Devices
• Strength Testing Equipment

This is a compact tabletop test press machine for laboratory use. It can be used for pressing plastic sheets for compression molding and for vulcanizing rubber sheets, among other applications.

- It is a compact tabletop type that can be easily used anywhere. - The pressure plate can be moved and finely adjusted with just the pump's pressurization operation. (Automatic switching, two-speed type) - It has a fast heating rate and excellent temperature distribution. - It is equipped with an overheat prevention circuit. - It satisfies the functions of two units (heating and cooling) with one device. (Model with water cooling plate) - Air cooling unit [Model AIR-C] (optional for water-cooled plate specification, increases cooling efficiency by flowing air through the water cooling pipe, includes a check valve to prevent backflow of cooling water, manual operation for opening and closing the air and cooling water valves) - Other options include: safety cover [Model SC], interlock type safety cover [Model ISC], temperature controller [Model T-CONT] (programmed heating, maximum heating capacity of 12°C/min, maximum number of heating steps 16), heat plate parallel assistance mechanism [Model PARA], over-temperature prevention unit [Model TEMPG].

• Testing Equipment and Devices

This is a testing machine for measuring the MFR and MVR of thermoplastic resins (MI meter, MFR tester, melt flow rate tester, melt flow tester).

This is a device for measuring the indices MFR (Melt Mass Flow Rate, g/10 min) and MVR (Melt Volume Flow Rate, cm3/10 min), which represent the flowability of thermoplastic resins during melting. There are two testing methods: Method A (mass measurement method) and Method B (movement distance measurement method). With a modular design, you can freely add your preferred options such as the flow rate device for Method B measurement (piston movement distance measurement encoder), weight lifting device, cutting device, etc. By adopting a mechanism that allows for easy removal of the orifice die from the lower part of the furnace body, the workability and safety during cleaning have been improved. The load of residual resin extrusion has also been reduced. Testing conditions (preheating time, testing temperature, testing load, etc.) can be registered via a liquid crystal touch panel. Test results can be output to a computer* (a dedicated software option is required). Measurement data can be output in real-time to the dedicated software*. Trend graphs can be displayed, allowing for a visual understanding of the trends in MVR/MFR measurement values. (Optional, Method B only) An automatic cutting device (with a sliding mechanism) can be used in conjunction with a flow prevention clamp.

• Viscometer
• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

This is a melt indexer capable of multi-weight measurement as specified by ASTM D1238 Method D, in addition to standard single weight measurement.

【Features】 ■ A load range of 0.325kg to 21.6kg is pre-installed in the device. By automatically selecting the weight, the operator's burden is reduced, and the safety of the operation is improved. ■ Up to three-step load increments and decrements (multi-weight measurement) can be performed automatically in a single test. This allows for the determination of the flow rate ratio (FRR), which is commonly used as an indicator of how the rheological properties of thermoplastic materials are affected by the molecular weight distribution. (ASTM D1238 Method D) ■ It can also be used as a standard single-weight measurement melt indexer (MFR/MVR measurement device, MFR meter, MI meter, melt flow rate testing machine).

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices
• Analytical Equipment and Devices

It is a testing machine that applies bending actions to materials such as paper, plastic film, metal foil, and flexible printed circuit boards (FPC) to evaluate their foldability.

● Spring-loaded and dead weight types are selectable. ● Bearing guides are used in the sliding bearing section to reduce friction. ● Direct drive method (bearing) adopted to improve bending angle accuracy. ● Cooling fan suppresses temperature rise of the test specimen during bending tests. ● Easy operation with a liquid crystal touch panel. ● In addition to mechanical break detection, it also supports disconnection detection via continuity and resistance values (optional).

• Testing Equipment and Devices
• Strength Testing Equipment

This is a testing machine that applies impact to a plastic specimen and determines the impact value from the energy of the pendulum required for destruction.

● It features a digital display, eliminating errors from wear loss of the test needle and reading errors by the operator. ● By replacing the hammer and specimen support base (fixed base), it can accommodate Charpy impact tests, Izod impact tests, and tensile impact tests. ● Easy operation with a color LCD touch panel. It can display and save the average, maximum, minimum, coefficient of variation, and standard deviation of impact values. ● Measurement data can be saved to a PC. (Note: Dedicated data processing software is required as an option. PC is optional.) ● Hammer release can be operated by button. There is no individual variation during hook release, improving reproducibility. (Note: Optional.) ● Instrumentation system can be selected. (Note: Optional. For Charpy impact tests and in-basis tensile impact tests only.) ● Positioning support base can be selected. It allows easy and accurate setting of the specimen. (Note: Optional for Charpy impact tests.) ● Various safety covers (with or without top) can be selected. (Note: Optional.)

• Testing Equipment and Devices
• Strength Testing Equipment
• Impact Test

This is a testing machine that measures the static friction coefficient (μS) and dynamic friction coefficient (μK) of materials such as plastic films, paper, textiles, and leather products using the horizontal method.

● You can check the measurement graph on the touch panel. ● Measurement results can be saved (up to 100 data). ● You can print measurement conditions and results on a compact printer* (optional). ● Measurement results can be displayed and saved on a PC* (optional). ● The display language can be switched based on settings (Japanese/English). ● The load display is range-less. ● A safety cover* can be installed (optional). ● There is also a heated plate version available. (The video below shows the heated plate version.)

• Testing Equipment and Devices
• Strength Testing Equipment

It is a testing machine (friction coefficient measuring device) that measures the static friction coefficient (μS) of materials such as plastic films, paper, and textile products using the inclined plane method.

● It has a compact space-saving design. ● It features a liquid crystal touch panel, making operations such as setting test conditions and displaying test results easy. ● Test results can be imported to a PC* (optional).

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

It is a testing machine that evaluates the stiffness of extremely thin materials such as films by measuring the resistance to collapse in a loop shape.

You can evaluate the strength of extremely thin materials such as films.

• Testing Equipment and Devices
• Strength Testing Equipment

This is a testing machine for measuring the melt viscosity of polymer materials when subjected to shear flow in a molten state. Measurement of die swell and melt tension is also available as an option.

● Easy cleaning of the furnace cylinder with button operation. ● Supports test speeds up to 1500mm/min. ● Added twin-cylinder specifications to the lineup. ● Pressure sensor specifications are also available as an option. (*Only for ∅15mm furnace body, optional) ● Safety door is included as standard. ● Over 40 years of experience and trust since the development of the first-generation capillograph.

• Viscometer
• Testing Equipment and Devices
• Analytical Equipment and Devices

This is a notch processing machine that automatically performs notch cutting on Charpy impact test specimens and Izod impact test specimens. It enables high-precision notch processing with minimal burrs.

● This is a machining machine for notching that performs notching cutting processing on Charpy and Izod impact test specimens based on the notching processing conditions specified in JIS K 7144 and ISO 2819. ● It is possible to set and register processing conditions (such as cutting depth per pass and feed rate) according to the material of the test specimen. ● High-precision notching cutting processing can be achieved in increments of 0.01 mm using a pulse motor. ● In addition to notching cutting processing for impact test specimens, the A-4 type can also cut out test specimens for impact, bending, creep, etc., from JIS K 7139 and ISO 3167 multi-purpose test specimens (A-type dumbbell) (both end slice/side cut). ● The dimensions of the notch cutter tip and the actual notch dimensions of the processed samples are inspected and managed using a contour measurement machine.

• Testing Equipment and Devices
• Strength Testing Equipment
• Impact Test

This is a testing machine for identifying the blow point of rubber materials. By understanding the minimum required vulcanization time for rubber, it contributes to improving product quality and productivity.

The blow point refers to the minimum degree of vulcanization required to eliminate the presence of bubbles generated by insufficient vulcanization within the vulcanized material at the end of the vulcanization process when vulcanizing compounds that include rubber under pressure. Measuring the blow point is very important for producing products with a short vulcanization time and no bubbles at all. This blow point varies depending on the composition of the rubber compound, the mixing method, temperature conditions, and so on, so it is necessary to measure it very frequently for quality control of vulcanized rubber products and for research and development of rubber compositions.

• Testing Equipment and Devices

This is a testing machine for understanding the processing characteristics of polymer materials such as thermoplastic resins, thermosetting resins, and elastomers.

The Laboplast Mill S series consists of a basic unit, measurement head (mixer/extruder), dedicated frame, data processing unit (with rack), and its accessories. The control of the equipment and data processing and analysis of various characteristic values such as torque, resin temperature, and pressure are performed by a computer. 【Features】 ■ The measurement head is integrated with the dedicated frame, improving operability and safety. ■ Automatic centering function for coupling. ■ Added model 3S500 with a maximum rotation speed of 500 rpm to the lineup. *Sample testing is available at our factory in Kita-ku, Tokyo.

• Extrusion Machine
• Testing Equipment and Devices

Tabletop mixing and extrusion molding evaluation test device. It allows for processability evaluation with a very small amount of samples using a super compact mixer and extruder.

The "Laboplast Mill Micro" is a tabletop experimental device used for evaluating the kneadability and extrusion characteristics of samples that can only be obtained in small quantities, such as ultra-small volume samples synthesized at the laboratory level, nanoparticles (carbon nanotubes, silica, titanium oxide, etc.), and next-generation composite materials in research and applications. ■ Sample testing is available at our factory (Kita-ku, Tokyo), so please feel free to contact us.

• Extrusion Machine
• Testing Equipment and Devices
• Analytical Equipment and Devices

A simple manual injection molding machine for producing test specimens. It can also be used as a pelletizer to pelletize amorphous samples mixed in a mixer.

●It can be used as a simple manual injection molding machine to shape test pieces in the form of dumbbells or strips. ●By replacing the inner cylinder, it can also be used as a pelletizer to directly feed amorphous samples obtained from mixing (cylinder diameter ∅20mm) and pelletize them.

• Injection Molding Machine
• Testing Equipment and Devices

It is a device for measuring the thermal conductivity until the plastic material changes from a molten state to a solid state through natural heat dissipation.

- Automatic measurement of up to 50 temperature levels is possible once the sample is set. - The thermal capacity of the probe is minimized to improve measurement accuracy. - Continuous operation is possible as the piston heater follows the thermal contraction of the sample. - By vacuuming the inside of the cylinder before sample insertion, concerns about air bubble contamination in the sample are alleviated. - The piston pressurization cylinder can be used as a cleaning cylinder, making cleaning easy. - Over-temperature prevention features for the piston heater and cylinder heater. - Compact and lightweight.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices
• Analytical Equipment and Devices

It is a testing machine for evaluating the bending resilience of materials such as textiles, paper, and films.

The evaluation of rigidity and flexibility is conducted by swinging relatively weak materials such as woven fabric, paper, and film horizontally in a vertical position. 【Product Features】 ○ Measurement Range: 0.01 to 5000mN ○ Specimen Width: 12.7, 25.4, 50.8mm (J TAPPI No.40) ○ Specimen Length: 25.4, 38.1, 63.5, 88.9, 114.3mm (same standard) ○ Rotation Speed: 2rpm (6°/second) ○ Reference Standards: JIS L1085, L1096, J TAPPI NO.40, TAPPI T543om-11 * Options: Common data acquisition software Model EX-2, Compact printer Model PS-B1 * For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices
• Strength Testing Equipment

Related standards: ISO 9237 (JIS L 1096), ASTM D 737

The F type Permeameter measures air permeability of fabrics. Applies a specific suction pressure (differential pressure) to sample and evaluates by air flow rate.

• Testing Equipment and Devices

It is a testing machine that measures the heat release rate and heat release amount during the combustion of materials, used for performance evaluation of fire-resistant materials based on the Building Standards Act.

The corn calorimeter is a testing device that measures the rate of heat generation and heat quantity based on the theory that "the amount of heat generated and the amount of oxygen consumed are constant (13.1 MJ per kg of oxygen)" through a method of measuring oxygen consumption during the combustion of organic materials. It is used for performance evaluation of fire-resistant materials based on the Building Standards Act. Since it allows for understanding the combustion behavior and smoke generation of various materials, it greatly contributes to research on fire resistance characteristics.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices
• Analytical Equipment and Devices

It is a device for measuring the gas permeability (gas barrier properties) of materials such as plastic films and rubber sheets using the differential pressure method.

- Measures the gas permeability (gas barrier properties) of materials such as plastic films and rubber sheets. - Adopts an automatic valve for fully automated measurements. - Does not limit the type of measurement gas. - The measurement section supports two sizes of test specimens (measurement section diameters ∅30mm and ∅70mm). - Modular design of the measurement section allows for additional expansions. - Temperature error correction function for permeated gases. - Email functionality enables receipt of messages in case of errors or at the end of tests. - Measurements are executed while saving data, allowing for data analysis and confirmation even during the test. - Options available for measuring diffusion coefficients, solubility coefficients, and hydrogen gas. - Utilizes a high-precision vacuum gauge with a reading accuracy of 0.25%. Reference Standards: JIS K7126-1, JIS K6403-3, ISO 15105-1, ASTM D1434, ISO 2782-1 (only applicable to CT type), ISO 7229 (only applicable to CT type), JIS K6275-1 (only applicable to CT type).

• Testing Equipment and Devices

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Are you making progress on measures for the "2024 Problem"? With stricter management of drivers' working hours, reducing "waiting time" has become an urgent issue in the logistics field. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability situation, reducing unnecessary waiting and queueing, and shortening waiting times to alleviate the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start addressing the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult with us.

The Japan Plant Maintenance Association conducts an annual survey to understand the "payment rates for outsourced skilled workers" related to maintenance services and construction, primarily targeting equipment users in the process industry. This has been carried out once a year since 1989 (four times a year until 1998), categorized by region, profession, and over the years. You can respond to the survey using the questionnaire below during the period from September 1 (Monday) to November 21 (Friday). We appreciate your cooperation. *Those who respond will receive a report (PDF version) on the "2025 Outsourced Skilled Workers' Payment Rate Survey." Target: Primarily users of equipment and devices in the process industry that outsource maintenance-related construction work. *Companies that receive maintenance-related construction orders or do not outsource construction are not included in the survey. Survey Period: September 1 (Monday) to November 21 (Friday), 2025.