List of Contract Services products

The oil temperature is raised at a constant rate (120°C/h), and a specified bending stress is applied to the sample, with the temperature at which the specified deflection is reached being defined as ...

• Contract measurement

The temperature at which the penetration depth of a needle with a cross-sectional area of 1 mm² reaches 1 mm under a specified load, while the oil temperature is steadily increased in the oil, is refe...

• Contract measurement

It is represented as BPT when a φ5mm steel ball is pressed with a load of 20N for 1 hour in oil at the test temperature, resulting in a sample indentation depth of 0.209mm.

• Contract measurement

The temperature that causes destruction with a 50% probability during impact testing in low temperatures with methanol/dry ice is referred to as the embrittlement temperature.

• Contract measurement

A test specimen with a weight is pulled on top of the counterpart material using a tensile testing machine to determine the static and dynamic friction coefficients.

• Contract Analysis

It complies with both Method A (ring against disk, ring against ring) and Method B (pin against disk) of JIS K7218.

• Contract Analysis

The table wear test is an examination that wears the sample using a wear wheel.

• Contract Analysis

By simultaneously conducting thermogravimetric analysis and differential thermal analysis, it is possible to measure the heat absorption and release behavior during decomposition, as well as to determ...

• Contract Analysis

Analysis of elements (mainly metallic elements) in the sample and in the eluent. We also accommodate pre-treatment.

• Contract Analysis

Surface and cross-sectional observation of samples, as well as elemental analysis and mapping through X-ray analysis, can be performed.

• Contract Analysis

Dynamic viscoelasticity measures the rheology of solid materials through temperature sweep mode at a constant frequency and frequency sweep at a constant temperature.

• Contract Analysis

The glass transition temperature of the resin, as well as measurements of viscosity during melting, thermosetting behavior, and steady-state flow viscosity, can be performed.

• Contract measurement

This is a method for measuring accurate thermal conductivity without performing absolute measurements of heat quantity, by simultaneously measuring a reference sample with known thermal conductivity.

• Contract measurement

Measure the electrical resistance using an insulation resistance meter between the circular electrodes, and determine the volume resistivity and surface resistivity from the electrode shape.

• Contract measurement

While the volume resistivity and surface resistivity reflect the shape factors of the test specimen, the insulation resistance is directly indicated by the resistance value (Ω) between the tapered pin...

• Contract measurement

It is a standard for conductive rubber, but it is applied to resistance measurement of conductive plastics.

• Contract measurement

Place four needle-shaped electrodes in a straight line on the sample, pass a constant current between the outer two probes, measure the potential difference that occurs between the inner two probes, a...

• Contract measurement

Using the mutual induction bridge method, the dielectric constant and dielectric loss tangent are determined from the capacitance and conductance of the measurement object at equilibrium.

• Contract measurement

We will determine the dielectric constant and dielectric loss tangent at high frequencies using the hollow resonator perturbation method.

• Contract Analysis

Apply a commercial frequency voltage of 50Hz or 60Hz across the electrodes with the test specimen in between, and determine the voltage that causes the sample to break down.

• Contract measurement

An arc discharge is generated at a specified interval between two tungsten electrodes on the surface of the test specimen, and the time until the sample breaks and the arc discharge disappears is also...

• Contract measurement

Apply a voltage between the platinum electrodes and drip the electrolyte until tracking failure occurs. Evaluate at a voltage that does not cause failure with the specified number of drips.

• Contract measurement

Charge Decay Measurement Device STATIC HONESTMETER Type S-5109 (Manufactured by Shishido Electrostatic Co., Ltd.)

• Contract measurement

It is possible to evaluate the electrostatic properties of polymer materials.

• Contract measurement

Measurement of injection flow length using spiral flow.

• Contract measurement

If you need to measure thermal conductivity, leave it to us.

• Contract measurement

Electronic components, communication devices, precision instruments, small medical devices, etc.! Significantly reduce the burden of outsourcing management.

• Contract Inspection

We melt the metal poured into the mold with a material composition that meets our customers' needs! Introducing our casting technology.

• Casting Machine
• Contract manufacturing
• Contract Inspection

Check trends in the location and size of internal defects with CT scans! Introducing our quality assurance.

• Contract Inspection
• Contract Analysis
• Contract measurement

Is the preliminary survey for asbestos completed for that construction? We provide one-stop nationwide support from investigation to countermeasures.

• Contract Inspection

Leave the engineering of image processing and data analysis to us!

• Contract Analysis

Low cost, high precision, accurate non-destructive testing from 50,000 yen per sample.

• Contract Analysis
• Contract measurement
• Contract Inspection

Low cost, high precision, accurate non-destructive testing from 50,000 yen per sample.

• Contract Analysis
• Contract measurement
• Contract Inspection

Low cost, high precision, accurate non-destructive testing from 50,000 yen per sample.

• Contract Analysis
• Contract measurement
• Contract Inspection

Provide new perspectives and methods for archaeological research.

• Contract Analysis
• Contract measurement
• Contract Inspection

Low cost, high precision, accurate non-destructive testing from 50,000 yen per sample.

• Contract Analysis
• Contract measurement
• Contract Inspection

Product verification of 3D printers: Materials science enters the 3D era! Fully automating the tissue observation process.

• 3D measuring device
• Contract Analysis
• 3D Printer

We will provide various validation services that meet different standards.

• Other clean room equipment and facilities
• Contract Inspection
• Contract measurement

For optimal filter design! Introducing services such as lending and contracted testing.

• Contract Inspection

Analyze the filter after resin circulation as needed! Supporting optimal operation for our customers.

• Analytical Equipment and Devices
• Contract measurement
• filter

Prevent falling accidents of exterior wall tiles in advance with the cost-effective and time-efficient "rope access method"! Work is also possible in high and difficult locations where scaffolding ins...

• Contract Inspection

We support your research and development and quality control through contracted measurements!

• Contract measurement

The FIB device allows for high-precision processing at the desired position on a Si substrate without a mask at the nano level.

• Processing Contract
• Contract Analysis
• Other semiconductors

STEM-EDS observation can confirm the shape and layer structure of the insulating film between semiconductor Poly-Si (polysilicon) and can be applied to investigate the causes of semiconductor defects.

• Semiconductor inspection/test equipment
• Contract Analysis
• Other semiconductors