List of others products
- classification：others
631～675 item / All 73966 items
Reduce the workload from handling heavy objects! Here are five case studies that solved customer challenges! We are also accepting free consultations and tests tailored to your work!
- Other conveying machines
Strong cold wind from room temperature to -13°C! Depending on the usage environment, you can choose between the combo type or the separate type!
- Cooling system
April 10, 2024 (Wednesday) to April 12, 2024 (Friday) Notice of Participation in Nagoya Manufacturing World 2024
Sanwa Shiki Ventilator Co., Ltd. will be exhibiting at the 2024 Monozukuri World (Nagoya) held at Port Messe Nagoya. We will also be showcasing our large cooling fans and cool/warm ambient products. Date: April 10, 2024 - April 12, 2024 Opening: 10:00 AM Location: Nagoya Port Messe (Exhibition Hall 1) *Our booth: 19-1 We would be grateful if you could visit us if you have the time.
Reduce water intrusion caused by sudden flooding from guerrilla rainstorms! A simple water-stopping sheet with ten times the water-stopping performance of sandbags.
- others
- Other office supplies
Proposal for preparedness against urban water disasters: Exhibiting four types of water-stopping products at the "2019 Disaster Prevention Industry Exhibition in Tokyo" - Experience the water-stopping performance through demonstrations using water tanks.
Cultural Shutter Co., Ltd. will exhibit four types of water-stopping products, the "Water Stop Master Series," at the disaster prevention event "2019 Disaster Prevention Industry Exhibition in Tokyo," held at Tokyo Big Sight, Aomi Exhibition Hall, from June 5 (Wednesday) to June 7 (Friday). The products being exhibited include the water-stopping door "Aquard," which achieves lightweight operability and can withstand water pressure loads of up to 3 meters; the power-free "Buoyant Water Stop Board," which automatically stands up using the buoyancy of water; the aluminum water stop board "Rakusette," which allows entry and exit from the opening after installation; and the lightweight, quick-installation simple water stop sheet "Tomepita." Additionally, on June 7 (Friday) at 1:20 PM, our development staff, who are members of the Japan Disaster Prevention Industry Conference, will give a lecture on the theme "Flood Countermeasures Due to Guerrilla Rainstorms (tentative)" at a workshop hosted by the Japan Disaster Prevention Industry Conference, so please join us for that as well.
3D printer supporting next-generation dental treatments
- others
Resin that can be cleaned with tap water and is available for use in surgical guides and splint production!
- others
The class-leading DTF (Direct To Film) printer that combines fine expression, high image quality, high productivity, and cost performance.
- Commercial printers
- Inkjet printer
- others
DTF print consultation desk
"I want to make a decision after seeing the actual product first." "I want to consider it after hearing the details." For those who feel this way, we have prepared a consultation desk in collaboration with authorized dealers who are well-versed in DTF sales. You can thoroughly discuss the DTF printing process and experience the actual machine. Please take this opportunity to see for yourself the capabilities of our DTF printer, which allows you to start serious T-shirt printing. *Roland DG's DTF printers are products that can be purchased from authorized dealers nationwide. In this initiative, our company, as the manufacturer, will directly handle your inquiries and introduce you to the most suitable sales partner (authorized dealer) based on your preferences and location, providing detailed consultations and demonstrations of the actual machine.
Most paint peeling is caused not by the paint itself but by inadequate pre-treatment. This explains the poor adhesion due to insufficient degreasing and chemical treatment.
- others
Peeling paint on aluminum products may be caused by surface roughness. I will explain the pretreatment that affects adhesion.
- others
Pinhole defects that are likely to occur in die casting and casting. This explains the relationship between internal gas and pre-treatment.
- others
Blistering defects may be caused by moisture or corrosion rather than paint. I will explain the phenomena occurring within the paint film.
- others
Blisters that occur months later, even if there are no issues at the time of delivery. This explains the relationship between internal corrosion and pre-treatment.
- others
The paint peeling that does not improve even after reviewing the baking temperature. I will explain the relationship with the often-overlooked previous processes.
- others
The degreasing process, which is often overlooked in pinhole prevention measures, will be explained in terms of how residual oil can lead to a decline in quality.
- others
Insufficient drying after cleaning may be the cause of pinholes. I will explain the defects caused by residual moisture.
- others
Blister defects may be caused by insufficient chemical treatment. I will explain the importance of adhesion and corrosion resistance.
- others
Flexibly accommodate product size, quantity, and painting specifications with three lines and pre-treatment equipment.
- others
The quality of the pre-treatment greatly affects adhesion. What processes should be checked before the paint and equipment?
- others
The true cause of pinhole formation is not the paint, but insufficient gas release. This explains how it can occur even with heating at 60 degrees.
- others
The cause of blisters is the volatilization and gasification of oils. The simultaneous removal of moisture and oils from the material is the key point for countermeasures.
- others
The cause of chipping is poor adhesion and insufficient film thickness. A film thickness of over 40 microns can reduce the occurrence rate by 95 percent.
- others
Insufficient degreasing leads to poor adhesion. Explaining the importance of often-overlooked processes.
- others
Insufficient degreasing leads to poor adhesion. An explanation of the importance of the often-overlooked degreasing process.
- others
Defects in which the paint film peels off during assembly may be caused by the pretreatment rather than the paint itself.
- others
The invisible swelling defects at the time of shipment are related to moisture residue and insufficient substrate treatment.
- others
Appearance defects caused by paint dripping occur due to excessive film thickness or irregularities in viscosity management.
- others
Whether the coating is too thick or too thin, it affects corrosion resistance and assembly accuracy.
- others
Adhesion to areas where it should not be applied can lead to assembly issues or poor electrical conductivity.
- others
The paint accumulation around the hole is a critical inspection point that can lead to assembly defects and drainage issues.
- others
Even small holes can affect rust prevention performance. We will organize measures against pinholes based on three factors: oil, moisture, and air.
- others
Invisible swelling defects at the time of shipment can lead to complaints a month later. Managing moisture beneath the coating is important.
- others
Foreign matter contamination is not just a problem in the booth. We will explain measures against surface defects by dividing the sources into four categories.
- others
Color unevenness is not just a visual issue. Quality differences arise from four conditions: stirring, dilution, film thickness, and curing.
- others
The sauce is generated not only by the skill of the operator but also by three conditions: film thickness, viscosity, and component posture.
- others
A coating that is too thick or too thin will result in defects. We will explain the management of film thickness from three aspects: dimensions, rust, and appearance.
- others
Reliable powder coating in conjunction with pre-treatment.
- others
Poor adhesion cannot be solved by paint alone. Multiple processes such as pretreatment, degreasing, and gas release are involved.
- others
Insufficient degreasing can trigger malfunctions. An explanation of the importance of the often-overlooked degreasing process.
- others
The cause of the dripping is the mismatch between paint viscosity and curing temperature. It explains the phenomenon where a 20-degree difference results in a threefold increase in occurrence rate.
- others
The cause of color unevenness is the variation in film thickness. By managing within plus or minus 30 microns, it is possible to reduce it by 90 percent.
- others
70 percent of foreign matter contamination is caused by the cleaning process. It is possible to reduce it by 99 percent through filter replacement and cleaning solution management.
- others
The cause of gloss unevenness is the difference in film thickness and drying speed. By managing the drying time within plus or minus 5 minutes, the improvement rate is 80 percent.
- others
The cause of rust reoccurrence is the thinness of the chemical treatment film. Ensuring a thickness of 8-12 microns allows for 5 years of corrosion resistance.
- others
Eighty percent of poor hardening is due to insufficient baking temperature. An explanation of the measured value that hardness decreases by 20 percent with a 10-degree difference.
- others
The cause of paint peeling is poor adhesion. By simultaneously optimizing degreasing and chemical treatment, the occurrence rate can be reduced by 99 percent.
- others
Identify the poor adhesion caused by insufficient degreasing. Explanation of the important process.
- others
Insufficient degreasing leads to poor adhesion. Explaining the importance of often-overlooked processes.
- others