List of Contract measurement products

Achieves high collection efficiency through electrostatic methods. Offers a wide range of products from large to small sizes. Also compatible with water-soluble oil mist.

• air conditioning

Horizontal combustion test (IEC 60695-11-10 Method A, ASTM D635)

• Contract measurement

Vertical Combustion Test for Thin Materials (ASTM D4804)

• Contract measurement

125mm vertical combustion test (IEC60695-11-20, ASTM D5048)

• Contract measurement

Horizontal combustion test of foamed materials (ISO 3582, JIS K6400-6, ASTM D4986)

• Contract measurement

The oil temperature is raised at a constant rate (120°C/h), and a specified bending stress is applied to the sample, with the temperature at which the specified deflection is reached being defined as ...

• Contract measurement

The temperature at which the penetration depth of a needle with a cross-sectional area of 1 mm² reaches 1 mm under a specified load, while the oil temperature is steadily increased in the oil, is refe...

• Contract measurement

It is represented as BPT when a φ5mm steel ball is pressed with a load of 20N for 1 hour in oil at the test temperature, resulting in a sample indentation depth of 0.209mm.

• Contract measurement

The temperature that causes destruction with a 50% probability during impact testing in low temperatures with methanol/dry ice is referred to as the embrittlement temperature.

• Contract measurement

The glass transition temperature of the resin, as well as measurements of viscosity during melting, thermosetting behavior, and steady-state flow viscosity, can be performed.

• Contract measurement

This is a method for measuring accurate thermal conductivity without performing absolute measurements of heat quantity, by simultaneously measuring a reference sample with known thermal conductivity.

• Contract measurement

Measure the electrical resistance using an insulation resistance meter between the circular electrodes, and determine the volume resistivity and surface resistivity from the electrode shape.

• Contract measurement

While the volume resistivity and surface resistivity reflect the shape factors of the test specimen, the insulation resistance is directly indicated by the resistance value (Ω) between the tapered pin...

• Contract measurement

It is a standard for conductive rubber, but it is applied to resistance measurement of conductive plastics.

• Contract measurement

Place four needle-shaped electrodes in a straight line on the sample, pass a constant current between the outer two probes, measure the potential difference that occurs between the inner two probes, a...

• Contract measurement

Using the mutual induction bridge method, the dielectric constant and dielectric loss tangent are determined from the capacitance and conductance of the measurement object at equilibrium.

• Contract measurement