Blasting Equipment Product List and Ranking from 47 Manufacturers, Suppliers and Companies

Commercial Dry Ice Blaster 'IB7/40'

Selected cleaning performance! Achieving innovative and efficient work.

The "IB7/40" is a commercial dry ice blaster that does not produce waste liquid and does not use water or cleaning agents. It achieves innovative and efficient work through eco-friendly cleaning that takes the environment into consideration. Additionally, it can operate with standard factory compressed air (5-6 bar), eliminating the need to install large compressors. This can reduce initial setup costs. 【Features】 ■ Eco-friendly cleaning that considers the environment ■ Common low air volume design ■ Improved efficiency with remote control operation ■ Increased efficiency with continuous operation *For more details, please refer to the PDF materials or feel free to contact us.

Company：宮原酸素
Price：1 million yen-5 million yen

High pressure cleaner
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Technical Introduction] Shot Blasting

Product shape, front and rear processes, etc.! Select the type of shot blast and media based on quality requirements.

At Kowa Jitsugyo Co., Ltd., we perform "shot blasting," which involves directly spraying media onto workpieces within the booth to process surfaces such as metal. Products are placed in a dedicated basket that rotates at low speed, and the method of projection allows for nearly uniform treatment across the entire surface. We have processing equipment including "tumbler-type air blast," "manual air blast," and "table-type air blast." 【Features】 ■ Selection of shot blast models and media based on product shape, preceding processes, objectives, and required quality ■ A wide variety of projection materials, including special projectiles ■ Extensive options for processing based on purpose ■ Deburring through localized projection is also possible ■ There is also a no-dent blast option *For more details, please refer to the PDF materials or feel free to contact us.

Company：興和実業
Price：Other

others
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pencil-type sandblasting machine "APB-3N model" that is easy to aim.

A pencil-type sandblasting machine that pursues "convenience and comfort" and "diversity"! Sandblasting treatment can be performed on targeted areas with the blast gun!

We offer the "APB-3N model," a pencil blast machine with a cabinet that can be selected between a low-cost standard power "suction type" and a high-power "direct pressure type." The blast gun fits comfortably in hand and uses a small-diameter nozzle tip, allowing for pinpoint sandblasting on targeted areas. 【Features】 ■ Easy to use and aim because it's a "pencil type" ■ 10 selectable combination patterns - Choose between suction type and direct pressure type - Expandable to a "two-chamber type" with a switching valve system ■ Comfortable to use with convenient standard equipment ■ Excellent expandability and options *For more details, please download the PDF or feel free to contact us.

Company：秋山産業
Price：100,000 yen-500,000 yen

Wafer processing/polishing equipment
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pencil blast machine "Pencil mini II"

A pen-type sandblasting machine suitable for surface treatment of fine parts (without blast cabinet / direct pressure and suction type).

The "Pencil Mini II" is a next-generation pencil blast machine that allows you to effectively utilize your existing blast cabinet as is, shaping only the necessary parts. You can choose from two types: the "Direct Pressure Type," which boasts strong grinding power, and the "Suction Type," which is more affordable and easy to obtain. Additionally, by shaping only the necessary parts with the assumption that you will be working with your existing blast cabinet, we have achieved a low price. 【Features】 ■ Two models with different injection methods to choose from ■ Low cost ■ Easy operation ■ Convenient to use ■ Suitable for upgrading to a general-purpose sandblasting machine *For more details, please download the PDF or feel free to contact us.

Company：秋山産業
Price：10,000 yen-100,000 yen

Wafer processing/polishing equipment
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Small Circulating Sandblasting Machine "ASB-2N Type"

A space-saving type sandblaster that condenses the know-how of general-purpose machine specifications.

The "ASB-2N model" is a compact circulation sandblasting machine that is widely used for various surface treatments of small parts, suitable for research and development as well as small lot production. By spraying a large amount of abrasive material at once, it achieves an astonishing high-power blast treatment. It allows for surface processing in a short time without taking up much space. Additionally, due to its excellent pumping capacity, it can easily handle fine-grained abrasives, resulting in a finished surface with minimal roughness on the workpiece. 【Features】 ■ Astonishing high power in a compact type ■ Circulation type ■ Precise finish with minimal surface roughness ■ Excellent expandability ■ Standard equipped with "high-durability nozzle tip" ■ Four selectable nozzle diameter specifications *For more details, please download the PDF or feel free to contact us.

Company：秋山産業
Price：100,000 yen-500,000 yen

Wafer processing/polishing equipment
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Steam polishing blast device "EcoQuip2"

Highly versatile steam polishing blast device capable of handling multiple applications.

We offer the steam polishing blast device 'EcoQuip2', which can be used for various applications such as concrete repair, coating removal, steel surface treatment, and graffiti removal. The operation for switching applications is simple, and it can accommodate a variety of abrasives. The maximum blast pressure is 175 psi. Please feel free to contact us if you have any inquiries. 【Features】 ■ Contributes to the expansion of your business with multi-purpose capabilities ■ Expansion of business domains ■ Allows for appropriate pressure settings tailored to individual applications *For more details, please download the PDF or contact us.

Company：第一産業尾道支店
Price：Other

Wafer processing/polishing equipment
Other abrasives
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compact Circulating Sandblasting Machine with Built-in Barrel Cage 'ASB-2N-BL Type'

Even fine-grained abrasives can be easily handled! It can produce a finished surface with minimal roughness on the workpiece.

The "ASB-2N-BL model" is a compact, circulation-type sandblasting machine with a built-in barrel basket that can automate the sandblasting process for small parts. It features simple operation, where you just place the workpieces in the automatically rotating barrel basket and set the timer. The reduction motor rotates the automatic barrel basket, while simultaneously, abrasive material is sprayed from the nozzle, ensuring that the workpieces are evenly blasted. Once the set time is up, the rotation of the barrel basket and the blasting spray automatically stop. This greatly contributes to improving the work efficiency of mass production processing for small parts. 【Features】 ■ Adoption of a circulation type ■ An incredibly high-power blaster despite its compact size ■ Precise finishing with minimal surface roughness ■ Standard equipped with a "high-durability nozzle tip" ■ Three selectable nozzle diameter specifications *For more details, please refer to the related link page or feel free to contact us.

Company：秋山産業
Price：Other

Wafer processing/polishing equipment
Other machine elements
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

TBM Precision Manual Shot Blaster

Manual peening, showcasing skilled craftsmanship. With micron-level finishing, it maximizes the durability and reliability of the components.

Our "Precision Manual Shot Blaster" is a specialized machine that achieves extremely high-precision shot peening processing for complex-shaped parts and fine areas through manual operation by skilled technicians. It allows for fine adjustments and concentrated processing on specific parts, which is difficult with automated machines, significantly improving the potential fatigue strength and wear resistance of the components. 【Strengths of Our Manual Shot Peening】 ■ Precise Control by Skilled Technicians - Adjusts projection pressure, projection accuracy, projection time, and projection distance in millimeter increments according to the material and shape of the parts and the required characteristics. This alleviates local stress concentration in the parts and maximizes fatigue life. ■ Capability to Handle Complex Shapes - Capable of addressing complex internal structures, R-shaped sections, and fine grooves that are difficult for automated machines to reach. By applying uniform treatment throughout, it enhances the overall performance of the parts. *For more details, please contact us separately.

Company：ティービーエム
Price：Other

Processing Contract
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Blast machine "Shot Blast (Mechanical)"

We introduce a blast machine that is suitable for processing a single variety and operates solely with button controls.

The "Shot Blast (Mechanical)" is a blast machine that throws projectiles by having them enter an impeller-type blade hopper, where the blades rotate to propel the projectiles. It is suitable for processing a single type of product and operates with just a button. It can accommodate lot items. There are various machines available, but the key is to select the machine based on the product and purpose. 【Features】 ■ Capable of handling lot items, but suitable for thicker processed products ■ Ideal for processing a single type of product ■ Operates with just a button *For more details, please refer to the PDF document or feel free to contact us.

Company：東洋ブラスト工業所本社
Price：Other

Other machine elements
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Issues with the Finish of Blasting Processing

Improvement by replacing or adding projection materials! The higher the proportion of sand, the more alleviated the dirt and crushing of the sand!

There is blasting equipment within the company, but the reasons it is not working well include issues such as "different finishing quality" and "inability to control surface roughness." Many of these processes are performed using a circulation-type blasting machine, and improvements can be made by regularly replacing the abrasive material or adding to it as needed. Additionally, improvements can be made by changing the machine specifications to a direct pressure type or by performing a preliminary cleaning before placing the workpieces into the machine. The higher the proportion of sand due to the abrasive material capacity within the machine, the less contamination and fragmentation of the sand will occur. [Issues] ■ Different finishing quality ■ The abrasive material becomes finer, resulting in different finishes between the first and subsequent pieces ■ Sand from the processing contaminates the next parts being processed (causing localized rust, dirt, or discoloration) ■ Inability to control surface roughness *For more details, please refer to the PDF document or feel free to contact us.

Company：東洋ブラスト工業所本社
Price：Other

Processing Contract
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Blast Suction Type 'SG-GT'

Automation of the air blast process is possible! Suction-type air blast compatible with single-piece flow production at the equipment opening.

We would like to introduce our air blast suction type 'SG-GT'. The large table rotates intermittently to transport the workpieces, while the small table above rotates during processing and air blowing. By accommodating single-piece flow production at the device opening, we can eliminate defects caused by contact between workpieces, and by combining robot workpiece handling with automatic transport, we can achieve automation of the air blast process. 【Features】 ■ Accommodates single-piece flow production at the device opening ■ Eliminates defects caused by contact between workpieces ■ Combines robot workpiece handling with automatic transport, enabling automation of the air blast process *For more details, please refer to the PDF document or feel free to contact us.

Company：日高産業
Price：Other

Other processing machines
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Comparison of Grid Blast Construction (Automatic Recovery Type Blast Equipment)

This is a comparison of grid blasting construction. Our company is fully equipped with large blasting facilities for both sand blasting and grid blasting.

◎Blast (Shot Blast / Grit Blast / Sand Blast / Type 1 Surface Preparation) By spraying compressed air at high pressure together with particles called abrasives and colliding them with the product, it removes dirt, grime, and paint from the surface. ◎Grit Blast (Blast / Type 1 Surface Preparation) One of the surface treatment (preparation) methods. There are four types of surface preparation, from Type 1 to Type 4, and blast is the substrate treatment of the highest grade, Type 1. ◎Sand Blast (Blast / Type 1 Surface Preparation) One of the surface treatment (preparation) methods. There are four types of surface preparation, from Type 1 to Type 4, and blast is the substrate treatment of the highest grade, Type 1. For large blast equipment, we have our own automatic recovery type blast machines. The size of the blast rooms is the same for both. Other abrasives can also be used for construction, so please feel free to consult us. Harada Iron Works Hiroshima Official Link

Company：原田鉄工
Price：Other

Other painting machines
Other surface treatment equipment
Rust Inhibitor
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air blast

High-pressure air and granular abrasive material are sprayed from the nozzle! Used in various situations such as the production of crafts.

The term "blast" in "air blast" means "to blow," and it refers to a method of achieving a goal by spraying granular abrasives (projectiles) along with high-pressure air from a nozzle. Air blast devices can be categorized into gravity feed and direct pressure types, depending on how the air is mixed just before being sprayed. Abrasives used can include glass beads, aluminum oxide, silicon carbide, and others. The purposes include deburring holes and grooves that cannot be reached by barrel polishing, removing coatings such as rust, scale, and paint, achieving a matte finish as a base for painting, and producing crafts made from materials like glass, stone, and wood. 【Lineup】 ■ Table type ■ Trolley type ■ Tumbler type ■ Small batch work type *For more details, please refer to the related links or feel free to contact us.

Company：タニシ
Price：Other

Other abrasives
Other processing machines
Blasting Equipment

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shot blast

Mainly uses metal projectiles! It has effects such as forming fine uneven surfaces to reduce friction.

"Shot blasting" primarily uses metallic abrasives, in contrast to air blasting, which uses mineral-based abrasives, and the particle size is larger compared to air blasting. It exhibits various effects such as imparting residual compressive stress to improve the fatigue strength of springs and gears, enhancing wear resistance through the formation of a surface hardening layer, and reducing friction by creating fine uneven surfaces. The purpose is common to areas such as deburring and coating removal, similar to air blasting (sandblasting). However, because shot blasting uses larger metallic abrasives, the impact force applied to the workpiece is significantly greater, making it mainstream for modifying the surfaces of metal workpieces. [Lineup] - Hanger type - Drum type - Rubber apron type - Movable table type - Monorail type *For more details, please refer to the related links or feel free to contact us.

Company：タニシ
Price：Other

Other abrasives
Other processing machines
Blasting Equipment

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sowa Engineering Co., Ltd. Company Introduction

We respond to everything related to surface treatment, cleaning, and sanitation!

At Soa Engineering Co., Ltd., we provide surface treatment and cleaning services. We promise optimal proposals and reliable construction based on the situation, including dry ice blasting, plant equipment cleaning, and flushing work. With the technology and experience we have accumulated, we will do our utmost to meet our customers' requests. [Applications of Cleaning Technology] ■ Application to processing work due to facility decommissioning, etc. ■ Application to equipment and facility maintenance ■ Application in the event of unexpected situations due to disasters *For more details, please download the PDF or feel free to contact us.

Company：ソーワエンジニアリング本社
Price：Other

Other cleaning tools
Other cleaning machines
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Data] Case Study on Problem Solving: Zinc Automotive Parts Shot Blasting Process

Eliminating shot blinding! Introduction of cases where shot blinding inspection and shot removal work have been abolished.

This document introduces a case study that addresses challenges in the shot blasting process for zinc automotive parts. In the hanger-type shot blasting, shot pellets are sprayed from above, and they hit the design surface, causing pellets with a diameter of φ0.40 or larger to get stuck in the recesses of the text area, which has a width of 0.45. Since the areas where the pellets get stuck are not consistent, it was necessary to check the entire text area. By creating and modifying a jig that allows for shot blasting directed downward onto the design surface, we resolved the issue of pellet blockage on the design surface. [Contents] ■ Improvement details ■ Customer feedback and points of satisfaction *For more details, please refer to the PDF document or feel free to contact us.

Company：愛中理化工業本社工場
Price：Other

Processing Contract
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cyclic Sustainable Blast Device

Four types of products are lined up: CB type, VD type, CSH type, and SP type!

We would like to introduce our "Cyclic Sustainable Blast Equipment" that we handle. Since it can be freely combined to suit the site, it enhances work efficiency safely. Additionally, it incorporates devices that minimize waste, making it environmentally friendly. 【Product Lineup】 ■ Continuous Blast Machine, 2-Nozzle Type "CB Model" ■ Bucket-Type Abrasive Sorting Machine "VD Model" ■ Continuous Recovery Hopper Tank "CSH Model" ■ Roots Blower Type Recovery Device "SP Model" *For more details, please download the PDF or feel free to contact us.

Company：関東アスコン
Price：Other

Wafer processing/polishing equipment
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Moisture Blast device for wet blasting

JISZ0310:2016MA Moisture Blast

This is a wet blast unit that can be combined with a dry blast device. The abrasive material is moistened to the extent that almost no water remains on the ground after blasting. Drying begins immediately after blasting. It can be attached and used with conventional air blast devices. The nozzle adapter at hand allows for ON/OFF control of the water flow and fine adjustments of the water volume. By fine-tuning, the water flow can be narrowed down to 100-200 CC/min. Water is pressurized (10:1) with a plunger pump and injected at high pressure. It is also suitable for long-distance blasting (300m or more). Rust inhibitors can be used in conjunction. A separate diaphragm pump allows for the use of stored water from tanks, etc.

Company：関東アスコン
Price：1 million yen-5 million yen

Other surface treatment equipment
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Low-floor vehicle-mounted circulating sustainable blast device

Vehicle-mounted × Continuous blast × Vacuum recovery device × Dust separation = Low-floor circulating sustainable blast

● This is a fully vehicle-mounted unit consisting of a two-nozzle continuous blast machine and a vacuum recovery system. ● It allows for automatic replenishment of abrasive material in conjunction with the continuous blast machine CB85, enabling non-stop spraying without the need to stop for replenishment. ● The vacuum-recovered abrasive material is automatically supplied to the blast machine continuously, allowing for uninterrupted spraying. ● During replenishment, the vacuum-recovered abrasive material is sorted, removing fine dust and enabling the reuse of abrasive material mixed with dust, preventing dust dispersion. ● It features a discharge counter function via a touch panel monitor. ● Abrasive flow adjustment is done using a metering valve. NETIS registration TH-240002-A "Circulating Sustainable Blast Device."

Company：関東アスコン
Price：Other

Other painting machines
Other processing machines
Blasting Equipment

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Blast with a tool-like feel! Compact air blast device 'KENX-I'

35% reduction in installation area compared to conventional models! A simple and compact blasting device! Perfect for small processing volumes!

The compact air blast device "KENX-I" features a simple structure with only the essential functions. It is suitable for simple blasting tasks such as deburring, rust removal, mold cleaning, and surface roughening, making it recommended for light users who use it for about 1 to 2 hours a day. Why not make your daily tasks more comfortable with the "KENX-I," which consolidates the work surface and maintenance area at the front of the device? 【Features】 ■ Compact size that can be installed in a small space ■ Lightweight type that can be relocated manually with a lift ■ All standard operations can be performed from the front of the device *For more details, please download the PDF or feel free to contact us.

Company：新東工業
Price：Other

Other machine tools
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Removal of rust from cast metal parts on-site.

Low-dust blast treatment sponge jet! Providing various cleaning and washing solutions!

We would like to introduce a case study that addresses the issues faced by our customer in glass manufacturing. They were troubled by the problem of rust forming on the cast parts used to protect the furnace heaters, which caused rust to fall and adhere to the products. In response, we proposed on-site work using a "sponge jet," which involves blasting a media that contains aluminum oxide particles, a polishing material, encapsulated in a special urethane sponge. As a result, since there was almost no dust generated, it was possible to work without affecting the surrounding area by simply enclosing the workspace, and all processing was completed in one day without damaging the parts. [Issues] - There are over 200 parts, leading to the possibility of loss or mixing of parts. - The target parts are cast components that are prone to cracking. - The downtime of the furnace is short, requiring all rust removal work to be completed in one and a half days. - Since the work is done in the customer's factory using available space, sandblasting, which generates a lot of dust, cannot be used. - There are concerns that sandblasting may leave abrasive materials trapped in the gaps of the parts, causing defects. *For more details, please refer to the PDF document or feel free to contact us.*

Company：蒲田工業
Price：Other

Other cleaning tools
Other cleaning machines
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hot working dry blast equipment

Similar to hot working, it has great effectiveness for grinding applications. Dry blast processing 【Features】 ○ Similar to hot working, it has great effectiveness for grinding applications. ○ There is little adhesion of abrasive material to the workpiece after processing, and it can be easily removed with air blowing. ○ Degreasing and drying of the workpiece is necessary. ○ Since water is not used, workpieces with rust-prone properties can be processed without anti-corrosion treatment. ○ Management of abrasive concentration is easy. ○ Abrasive material requires drying. ○ In the processing chamber, dry methods excel under the same conditions. ● For other functions and details, please contact us.

Company：フジキカイ
Price：Other

Other machine tools
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Decontamination of radioactive materials

A method with high decontamination effectiveness and minimal generation of decontamination waste!

We would like to introduce our handling of "decontamination of radioactive substances." In the decontamination project resulting from the Fukushima Daiichi Nuclear Power Plant accident, methods that have high decontamination effectiveness and generate minimal amounts of decontamination waste are required. By using dry ice as the blasting material, we have developed a decontamination technology that reduces the amount of decontamination waste generated without damaging the pavement surface. 【Reduction of Decontamination Waste】 ■ Since the blasting material is a gas and does not generate secondary waste, it is possible to reduce the volume of decontamination waste. *For more details, please download the PDF or feel free to contact us.

Company：東洋ユニオン
Price：Other

Other contract services
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dry Ice Blast Device "E.D.I.MINIMO"

High power design! The gun hose can reach up to 15m and is easy to use.

The "E.D.I.MINIMO" is a compact, high-power dry ice blasting device. Made in Japan with full support. It is equipped with an emergency stop switch, pellet flow adjustment, and a dry ice adhesion prevention feature. It also has a pellet discharge function, and the cleaning nozzle can be used widely from 100L to 800L, with a standard 200L included. 【Features】 ■ High-power design ■ Gun hose can extend up to 15m (when used at 0.7Mpa or more) ■ Cleaning nozzles available in 100L, 200L, 400L, 600L, and 800L (standard 200L included) ■ Emergency stop switch ■ Pellet flow adjustment ■ Dry ice adhesion prevention feature *For more details, please download the PDF or feel free to contact us.

Company：東洋ユニオン
Price：Other

Other cleaning machines
Other cleaning equipment
Other cleaning machines
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dry Ice Blast Device 'E.D.I.MINIMO Ver2'

Equipped with various functions such as emergency stop SW and pellet flow adjustment!

The "E.D.I.MINIMO Ver2" is a compact and high-power dry ice blasting device. Made in Japan with full support. It is suitable for use within the range of factory air. It is equipped with an emergency stop switch, pellet flow adjustment, dry ice adhesion prevention function, and pellet discharge function. 【Features】 ■ Suitable for use within the range of factory air ■ Gun hose can be extended up to 15m (when used at 0.7Mpa or higher) ■ Cleaning nozzles available for 100L, 200L, 400L, 600L, and 800L (standard 200L included) ■ Emergency stop switch ■ Pellet flow adjustment ■ Dry ice adhesion prevention function *For more details, please download the PDF or feel free to contact us.

Company：東洋ユニオン
Price：Other

Other cleaning machines
Other cleaning equipment
Other cleaning machines
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dry Ice Blast Equipment Xcel6

Finally releasing an affordable model! The smallest type that blasts 3mm pellets! It offers high cost performance. Demo tests available!

Revolutionary size and price for dry ice blasting equipment! We offer high-performance models at an astonishingly low price. There is no need for a high-performance compressor, which has been a challenge until now, and noise has been significantly reduced. (Additional accessories required) For applications like molds, painting, and vapor deposition tools, dry ice cleaning generates no waste liquid. Additionally, since no solvents or chemicals are used, environmental impact is reduced! We also accommodate tests by shipping samples to us or bringing them in! *For more details, please download the PDF or contact us.

Company：レゾナック・ガスプロダクツ
Price：1 million yen-5 million yen

Other processing machines
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dry Ice Blast Equipment SDI-5

Achieves a wide blast pressure (40 to 250 psi / 2.8 to 17.2 bar)!

This large dual hose low air pressure blast system uses dry ice blocks/pellets/nuggets and offers flexibility and versatility with a wide range of blast pressure (40 to 250 psi / 2.8 to 17.2 bar).

Company：レゾナック・ガスプロダクツ
Price：Other

Other processing machines
Blasting Equipment

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dry Ice Blast Equipment Aero 80FP

Adopting components that consider fluid engineering! It maximizes the power of air to deliver the strongest cleaning ability. Demo tests available!

The Cold Jet Aero 80 dry ice blasting machine boasts the industry's best cleaning power! Furthermore... With a durable welded steel frame, a sealed lubrication system, and a patented separation hopper, along with advanced mixing and insulation provided by the SureFlow system, it can deliver cleaning effectiveness without any blockage of dry ice. As a result, there are users who operate it 24 hours a day.

Company：レゾナック・ガスプロダクツ
Price：1 million yen-5 million yen

Other cleaning machines
Blasting Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Blasting Equipment Product List and Ranking from 47 Manufacturers, Suppliers and Companies | IPROS GMS

Blasting Equipment Manufacturer, Suppliers and Company Rankings

Blasting Equipment Product ranking