Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
31～60 item / All 378 items
I will introduce an example of analysis using an inline thickness gauge.
Managing film thickness not only affects the reliability of the product but also contributes to the reduction of raw materials. The portable fluorescent X-ray analyzer "OURSTEX100FA" can perform film thickness analysis in the manufacturing process of factories. For more details, please contact us or refer to the catalog.
Reduce preparation time!
Productivity will improve through the consolidated flow!
Are you having trouble with the rise of flow solder?
With the θ-free (theta-free) flow carrier that can be resized and customized, you can set the optimal conditions (angles) by adjusting the θ-free (changing the angle).
A heating-curable epoxy adhesive that is a one-component product and has excellent storage stability. It cures quickly in a short time of 1 to 2 minutes at temperatures between 90 and 150°C.
The "Seal-glo NE series adhesive for fixing chip components" is an adhesive developed for temporarily fixing chip components. It is a one-component, heat-curing epoxy adhesive that boasts excellent storage stability. Not only does it have rapid curing properties, curing in just 1 to 2 minutes at temperatures between 90 and 150°C, which is required for SMD mounting, but it also comes in various grades that excel in high-speed dispensing and fine printing to meet your needs. Halogen-free options are also available. For more details, please download the catalog or contact us.
Safe and speedy! Vacuum suction of the top tape and instant cutting.
The "MKK-K-M-DAM00B" is a top tape (cover tape) collection gun that can cut safely and instantly. Typically, the process involves scraping out and cutting with scissors, but with this product, cutting is done while vacuuming, completing the task in just a few seconds. No power supply is needed; simply connect the air hose, and it is ready for use. 【Features】 ■ Instantly cuts while vacuuming ■ Can be used with any manufacturer as long as the feeder has a structure to store the top tape ■ Collected top tape can be stored in the included bag and disposed of at any time ■ No power supply required *For more details, please refer to the PDF document or feel free to contact us.
Available for use in offices, public facilities, and many other places! It has a sensor that lights up automatically in response to the surrounding light intensity when it gets dark.
We would like to introduce the "LED Illuminated Fire Extinguisher Sign" that we handle. Additionally, it can be used continuously for up to 3 years and can be easily installed with screws or double-sided tape. 【Features】 ■ Sensor type that lights up in the dark ■ Long-term use without the need for replacement ■ No construction required, easy installation *For more details, please refer to the PDF document or feel free to contact us.
Achieving thicker and thinner than the ink thickness considered to be the limit in screen printing!
We would like to introduce our "Diverse Shape Printing Reverse Transfer Device" that we handle. The transfer method of this product differs from conventional offset printing by applying the movement of a reverse coater, which is a type of conveyor or roll coater. With this method, ink is first screen printed onto a roll-shaped transfer film, and then the ink pattern on the transfer film can be accurately transferred onto curved surfaces. 【Features】 ■ Capable of printing on curved, concave, and convex surfaces ■ Utilizes the movement of the reverse coater ■ Allows for the transfer of ink while it is still wet *For more details, please refer to the PDF materials or feel free to contact us.
Testing machine and inspection equipment
Various testing devices and testing machines
A distillation regeneration system that vaporizes waste solvents and recovers them by re-liquefying.
Batch type: When the amount of waste liquid generated is about 10 to 150 liters per day, it can handle substances other than the components to be distilled and regenerated (residual materials) in both liquid and solid forms. (Batch type cannot operate continuously in an automated manner.)
Years of accumulated achievements and know-how condensed! It is possible to easily achieve high-precision film formation!
The OMD-1000 is an optical film thickness gauge that condenses the technology and know-how cultivated over many years as a film component manufacturer. It has an electrostatic discharge test withstand voltage of ±5kV. Improved noise resistance enables reliable film thickness monitoring. Additionally, its compact design with a built-in spectrometer allows for automatic control via commands from a computer.
A comprehensive product catalog from Sankou Electronic Research Institute that strongly supports high-quality measurement, inspection, and quality control operations, including electromagnetic and eddy current thickness gauges!
This is a comprehensive catalog of high-precision and highly reliable measuring instruments, testing equipment, and inspection devices handled by Sanko Electronic Research Institute. We provide robust support for high-quality measurement, inspection, and quality control operations based on our extensive experience and know-how. 【Contents】 - Electromagnetic / Eddy current thickness gauges - Electromagnetic thickness gauges - Eddy current thickness gauges - Related thickness gauges, measuring instruments, and inspection devices - Pinhole detectors - Metal detector / needle detector - Construction and renovation related equipment - Moisture meters - Related measuring instruments, testing equipment, and inspection devices *If you would like a catalog, please contact us through the request for materials. *You can view detailed contents from the download section.
Wide measurement range, two-pole type with three-stage scale.
It can measure from thin films to thick films with a single device on a three-scale measurement. In particular, thick films can be measured up to 15 mm.
With a telescopic guide, head adjustment mechanism at 0° and 90°. (Made to order)
Since the magnetic pole is attached to the end of a long, flexible handle, it can measure the coating on thin pipes (φ32mm or more), the back side of equipment, high places, and distant areas.
Measurement of small parts is possible with a pen-type probe (made to order).
This is a pen-type probe equipped with a very fine magnetic pole at the tip. It allows for measurements of small parts and in narrow spaces.
Comb-shaped
During the painting process, the thickness of the uncured paint film is measured using a comb-shaped gauge, and the thickness of the paint film after drying is estimated from the solid content of the paint. Complies with JIS K 5600-1-7, ISO 2808, ASTM D 1212, and BS 3900.
Comb-shaped
Simple type
Precision type
Measures the wet film thickness of paints, inks, varnishes, adhesives, oil films, and resin coatings on metal substrates. Complies with JIS K5600-1-7, ISO 2808, and ASTM D1212.
Built-in with 10 types of sound speed tables.
For measuring the thickness of metals such as iron, copper, cast iron, aluminum, and other metals, as well as hard plastics, glass, porcelain, etc. There are various types of probes available. Easy operation, bright LCD display (EL lighting).
No adjustment needed, suitable for the field.
◆Easy type that requires no adjustment. ◆Field-oriented using magnetic force.
Efficient and cost-effective measurement of coating, plating, and lining thickness. Built-in printer, capable of recording up to 20,000 measurement values.
The "CTR-2000V" is a digital thickness gauge suitable for non-destructive measurement of insulation coatings and linings on iron substrates, such as those found in automobiles, as well as the thickness of non-magnetic metal coatings. It can be easily operated with a Japanese keyboard and allows for the registration of up to 10 calibration curves. With a large memory capacity that can record up to 20,000 measurement points, it enables smooth measurement and recording tasks by a single person, even for multi-point measurements like those on bridges. 【Features】 ■ Wide measurement range of 0 to 2000μm ■ Built-in statistical function and printer for immediate output of statistical results ■ Ability to categorize recorded content into blocks ■ Upper and lower limit setting function with alarm feature *For more details, please refer to the materials available for download in PDF format or feel free to contact us.
Intuitive and easy to understand! The best-selling analog thickness gauge has undergone a full model change!
The "Pro-S/Pro-W" is an electromagnetic thickness gauge that non-destructively measures the thickness of insulating coatings and linings on iron substrates, as well as non-magnetic metal coatings such as plating. It adopts a two-point calibration method that complies with the standards, internal regulations, and criteria of various public corporations, organizations, government offices, research institutes, and various corporations in Japan, as well as international standards such as ASTM and ISO. It supports a wide range from 0 to 5 mm, accommodating everything from thin film coatings to linings. 【Features】 ■ Traditional analog meter style ■ Compact body ■ 0 to 5 mm wide range ■ Special magnetic pole probe ■ Dial cover included as standard *For more details, please refer to the PDF document or feel free to contact us.
For sampling before demolition and construction, prior to the asbestos pre-investigation. (Sales started on May 9, 2022)
The "DK-ASB-2" is a screening kit that can determine the presence of asbestos in building materials in about 5 minutes. For demolition, renovation, and repair work of a certain scale that starts on or after April 1, 2022, it is now required to report the results of asbestos surveys, regardless of whether asbestos is present or not! 【Features】 ■ Easy to use ■ Detectable in about 5 minutes ■ Compact and easy to carry *For more details, please refer to the PDF document or feel free to contact us.
Revolution in film thickness measurement using advanced photothermal radiation methods.
The "Coat Master Flex" allows for film thickness measurement without being affected by materials or surfaces such as metal, resin, wood, CFRP, and ceramics, even in an uncured state! It enables a wide range of measurements, including on-site painting measurements and inline measurements. 【Features】 ■ Non-contact measurement of coating thickness in both wet and dry states ■ Compatible with curved surfaces, corners, and edges ■ Real-time measurement possible even during the operation of the painting line ■ Significantly reduces construction time, avoiding rework and returns ■ Immediate verification after application, potentially reducing material consumption by up to 30% ■ Measurement time per location is just a few seconds, with a measurement area of φ1 to 50 mm ■ Distance to the measurement target is 2 to 15 cm, with an irradiation angle of ±35° (no need for a right angle of 90°) ■ Weighs approximately 1.5 kg, lightweight and compact, making it ideal for on-site work *For more details, please refer to the PDF document or feel free to contact us.
[Presenting a Collection of Basic Knowledge on Film Thickness Gauges] Automatically recognizes the measurement substrate metal with a dedicated probe! It is possible to select connecting probes tailored to measurement applications such as for heat resistance.
The "SWT-NEO Series" from Sanko Electronic Research Institute is a thickness gauge that can be used for insulating coatings such as painting, lining, plating, and anodizing. Depending on the measurement application, you can choose from probes for ferrous substrates, probes for non-ferrous metal substrates, or connection probes that can be used for both ferrous and non-ferrous substrates. The slim body design reduces fatigue during handheld operation. The easy-to-understand guide display screen makes operation simple. 【Features】 ■ Automatic recognition of the measurement substrate metal by dedicated probes ■ Built-in statistical functions ■ Easy-to-understand guide display screen ■ Upper and lower limit functions ■ Slim body design ☆ We are currently offering a "Thickness Gauge Basic Knowledge Q&A Collection." * For more details, please refer to the PDF document or feel free to contact us.
Multi-purpose probe with statistical functions.
● You can connect probes suitable for your application to the main unit for use. ● The statistical display screen can show the number of measurements, minimum value, maximum value, average value, standard deviation, block statistics, and more. ● By setting upper and lower limit sounds, you will be notified with a beep and screen display when measurement values are outside the set range. ● You can print measurement data using a separately sold dedicated printer. ● By using a separately sold precision measurement stand, it is also possible to measure small parts.
Three types: built-in probe, corded, and replaceable.
● Can be connected to the digital signal processing SIDSP probe. It provides excellent measurement accuracy without interference. Even when temperature changes occur, it stabilizes the measurement values without affecting the measurements and guarantees extremely good repeatability throughout the entire measurement range. ● In addition to a wide lineup of standard probes, we offer a variety of special probes designed to meet particularly challenging applications. • FN2.6 Probe It is especially suitable for measurements from above the automotive body and is minimally affected by differences in shape and base material. • Miniature Probe It is suitable for measurements from above thin films or very small areas, as well as for measuring grooves, holes, and recesses, with the tip designed at angles of 0°, 45°, and 90°.
High stability and high precision.
● Most coatings on metals (such as oxide films on aluminum, plating and painting of zinc and chrome on iron) can be measured. ● Most metal coatings on non-metals (such as plating on plastic) can be measured. ● Measurements are taken non-destructively in under one second, making it ideal for 100% inspection.
Measurement is smoother with autofocus equipped.
● The measurement section monitor screen displays the distribution of plating adhesion on the measured object visually. ● By adopting Windows software, the report creation function is enhanced. ● Note: Notification to the relevant Labor Standards Inspection Office is required for use.
High-precision measurement of metal films (such as copper foil and plated printed circuit boards) on insulators in a short time (0.7 seconds).
● Adopts a 4-probe (Kelvin type) measurement method. It can measure both sides of a substrate and multilayer substrates without being affected by the back side or internal layers. ● Uses a PC. The screen is large and easy to read. ● Calibration and measurement are simple. Two ranges can be selected, allowing measurement of metal films from 2 to 120 μm. ● Up to 40 channels can be registered, allowing for management by separating channels with user names or product numbers. ● Measurement data can be saved for each channel, and statistical items can be set for the measurement data later for statistical processing. ● Abnormal values are notified by setting upper and lower limits for film thickness.
