We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Coating.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Coating×ナノコート・ティーエス - List of Manufacturers, Suppliers, Companies and Products

Coating Product List

1～12 item / All 12 items

Displayed results
Celtis Low-Temperature PVD Coating Processing

Celtis Low-Temperature PVD Coating Processing

Stable adhesion coating with low-temperature treatment! Low-temperature processing below 200°C is possible.

- Stable adhesion with low-temperature treatment (Since low-temperature treatment below 200°C is possible, coatings with excellent adhesion can be applied to SCM carburizing steel, SKS, and SUJ steel without reducing the base material hardness). - High-precision coating is possible (Due to excellent film thickness accuracy and reproducibility, it can be applied to precision parts with strict tolerances). - No droplets like those from arc IP, resulting in a smooth surface (Low aggressiveness towards counterpart materials and good tribological properties).

  • Plastic Mould
  • Ceramics
  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Celtis DLC Coating [Superior adhesion and wear resistance compared to conventional methods!]

Celtis DLC Coating [Superior adhesion and wear resistance compared to conventional methods!]

A new composite multilayer DLC coating with superior adhesion and wear resistance has arrived! It enhances the lifespan of sliding components, precision molds, and tools!

The Celtes DLC is a next-generation composite multilayer DLC coating produced by a hybrid process of Plasma Booster Sputtering (PBS) and Plasma CVD. By adopting a new plasma source, it can be deposited at lower temperatures (below 180°C) than before, significantly improving the durability of molds and parts compared to conventional DLC. With a high adhesion 3-5 micron DLC coating, it can also be applied to tool steel molds and SUJ/SCM steel parts that have previously been unsuitable due to insufficient adhesion at high surface pressures. 【Features】 - In the Fabry (Falex) seizure test, it achieved a seizure load limit of up to 2000 kgf under non-lubricated conditions and over 2500 kgf under lubricated conditions. - Compared to other companies' composite multilayer DLCs, the damage to the coating after the Fabry test is minimal, and it does not peel off even when the base material becomes red-hot and undergoes plastic flow. *For more details, please request documentation or view the PDF data available for download.

  • Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DLC coating for semiconductor forming molds

DLC coating for semiconductor forming molds

It is a DLC coating using a hybrid process of PVD and plasma CVD.

The semiconductor forming die's Celtes DLC coating is a new DLC (diamond-like carbon) coating produced by a hybrid process of PVD and plasma CVD. By adopting a composite multilayer film, it demonstrates superior adhesion compared to conventional DLC and allows for thick films (up to 5μm), resulting in exceptional durability. Additionally, it can withstand high surface pressures due to the use of a substrate reinforcement layer, not only on cemented carbide but also on tool steel. The DLC coating has a very smooth and hard surface with a low friction coefficient, preventing adhesion of soft metals such as solder plating and aluminum. This significantly reduces defects caused by solder debris adhering to the mold and dramatically improves productivity by decreasing cleaning frequency. For more details, please download the catalog.

  • Other semiconductor manufacturing equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Celtes coating for rubber molding dies

Celtes coating for rubber molding dies

It reduces mold contamination and dramatically decreases the maintenance frequency of the mold.

The Celtes coating for rubber molding molds reduces mold contamination in rubber molding and dramatically decreases the frequency of mold maintenance. Additionally, the surface hardness of the mold is increased, and corrosion resistance is improved, making it less susceptible to damage from blasting or alkaline cleaning, thus enhancing durability. It can be applied to nitrile, butyl, EPDM, chloroprene, and fluorine rubber, among others. For more details, please download the catalog.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ceres coating for glass lens molding molds

Ceres coating for glass lens molding molds

Release properties of molten glass, increased adhesion at high temperatures.

The Certex coating for glass lens and mold manufacturing showed low friction coefficients in friction and wear tests at 500°C in the atmosphere with BK7 balls, and observations of wear marks indicated minimal adhesion of BK7 glass. In glass lens molding, heat resistance and release properties from molten glass are required. Certex SD (TiBN-based) exhibits high adhesion and wear resistance at high temperatures and excellent release properties from molten glass. Certex T (TiAlN-based) has the highest oxidation onset temperature, and EDS analysis of the sliding marks did not detect oxygen. For more details, please download the catalog.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Automotive and motorcycle sliding parts Certex DLC coating

Automotive and motorcycle sliding parts Certex DLC coating

The adoption of Certex DLC coating for valve lifters, piston pins, rocker arms, and other components is spreading worldwide.

The adoption of DLC coating for friction reduction (improving fuel efficiency) is expanding for automotive engine parts that require wear resistance, seizure resistance, and reliability under harsh load conditions. For more details, please download the catalog.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Coating "Sertes T Multi-layer Coating"

Coating "Sertes T Multi-layer Coating"

New multi-layer coating joins the Celtes lineup!

Improvement of load-bearing capacity and impact resistance of cold forging molds and punching molds with Celtes T multi-layer coating. The PBS (Plasma Booster Sputtering) process enables low-temperature treatment below 250°C. Despite the low-temperature treatment, no peeling is observed even in the Rockwell C scale 150kgf indentation test. 【Features】 ○ High adhesion even with low-temperature treatment ○ Excellent impact resistance due to multi-layer structure For more details, please contact us or download the catalog.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DLC Coating "Certes DCY"

DLC Coating "Certes DCY"

A new coating joins the lineup! Improved load-bearing capacity and impact resistance of DLC coating!

"Celtes DCY" is a new coating that helps improve load-bearing capacity and impact resistance of DLC coatings. It has high adhesion strength due to low-temperature processing, and the adoption of a new plasma source allows for low-temperature processing below 180°C. The load-bearing capacity and impact resistance are enhanced with a Cr-based underlayer that has strong adhesion to steel and a tough buffer layer, preventing delamination even under high surface pressure and repeated impacts. Additionally, the "Celtes DLC Coating" offers a wide range of options, allowing for adjustments to coating properties and thickness based on application and usage conditions. [Features] ■ High adhesion strength with low-temperature processing ■ High load-bearing capacity with a multilayer structure ■ Extensive lineup *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Celtes N-S Coating for Plastic Lens Molding Dies

Celtes N-S Coating for Plastic Lens Molding Dies

The popular Celtes now features a water-repellent and oil-repellent grade! Improved release properties of molded plastic lenses and prevention of mold contamination.

The Celtes N-S coating is a multi-layered hydrophobic and oleophobic grade Celtes coating that combines a hydrophobic treatment with a hard ceramic thin film of nitride produced by an advanced Plasma Booster Sputtering (PBS) process.

  • Press Dies

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Celtic coating for plastic molding dies

Celtic coating for plastic molding dies

It is a hard thin film produced by an advanced plasma booster sputtering process.

The Celtes coating for plastic molding dies is a hard thin film of 2 to 8 μm produced by an advanced Plasma Booster Sputtering (PBS) process. It reduces abrasive wear caused by hard additives such as glass fibers in injection molding, while also preventing roughness of the steel substrate due to gas burning and corrosion. By selecting a film type suitable for the plastic material, it improves release properties, reduces the frequency of mold maintenance, and significantly enhances productivity. For molding glass fiber-reinforced PPS resin parts such as connector components, the CrN-TiAlN composite multilayer film Celtes T demonstrates excellent corrosion resistance, wear resistance, and release properties. For more details, please download the catalog.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Celtis T Multi-layer Coating

Celtis T Multi-layer Coating

Improving the load-bearing capacity and impact resistance of cold forging molds and punching molds!

The "Sertes T Multi-layer Coating" is a coating process with high adhesion even at low temperatures. It features a multi-layer structure that suppresses the progression of cracks with a Cr-based underlayer that has strong adhesion to steel, improving load-bearing capacity and impact resistance, and it does not peel off even under high surface pressure and repeated impacts. It is suitable for cold forging punches for steel processing and plastic molding dies. 【Features】 ■ High adhesion even at low temperatures ■ Excellent impact resistance due to the multi-layer structure ■ Applicable fields: - Cold forging punches for steel processing - Punches and dies for steel processing - Plastic molding dies ■ Applicable base materials: tool steel, cast iron, cemented carbide, etc. *For more details, please refer to the PDF document or feel free to contact us.

  • Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electromagnetic Wave Shielding PVD Coating "PROCEM"

Electromagnetic Wave Shielding PVD Coating "PROCEM"

Selectable from three types of conductive metals: silver, copper, and aluminum! Contributes to lightweight design with good dimensional stability.

"PROCEM" is a high-performance electromagnetic wave shielding PVD coating that surpasses conventional electromagnetic wave shielding paints. It is directly deposited onto resin housings, clearing electromagnetic wave shielding specifications and solving EMC issues. Additionally, a DLC coating can be applied as a protective layer over the PROCEM film. Please feel free to contact us if you have any requests. 【Features】 ■ Directly deposited with good adhesion to resin housings ■ Environmentally friendly dry coating ■ Contributes to lightweight design with high precision and dimensional stability due to its thin film *For more details, please refer to the PDF materials or feel free to contact us.

  • Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Coating

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.