Control device - メーカー・企業41社の製品一覧とランキング

Greenhouse Ventilation Window Control Device "ATOM 2"

A state-of-the-art controller for efficiently managing the ventilation windows of all agricultural houses.

Volume-type house window dedicated controller. Compatible with various windows such as skylights, side windows, and sliding windows. Temperature settings are knob-operated, allowing for easy management of the temperature inside the house. Completely independent settings with 4 systems; variable temperature in 2 to 5 stages. 【Control Output】 Opening and closing output (powered output) 4 systems Alarm output (non-powered contact output) 1 system 【Control Input】 Temperature sensors 4 points (1 standard, expandable up to 4), wind direction and speed sensor 1 point (only wind speed) Rain alarm 1 point, wind alarm 1 point, alarm input 2 points *For more details, please refer to the PDF document or feel free to contact us.

• 企業：三基計装
• 価格：Other

• Control Panel

Pulse-compatible digital input/output device 'WD100-GWPIO'

Contributing to the operational management and visualization of facility equipment! Converting to the original physical quantities and aggregating them.

**Features** - Dual-channel simultaneous measurement with one unit - Two sets of pulse measurements can be connected to a single measurement unit. - Long-distance communication via LoRa wireless technology - Communication is possible over 11 km in line-of-sight conditions and over 3 km in dense areas. *Note: Communication distance is affected by terrain and obstacles.* - Low power consumption - Approximately 2W of power consumption, making it easy to supply power for outdoor use. - Installable indoors and outdoors - Outdoor use is possible with a waterproof cabinet, and it can withstand temperature changes from -20°C to +70°C. - Accumulation of converted physical quantities - Pulse accumulation values/instantaneous values are scaled and converted into the physical quantities being measured, and data is accumulated. - Compatible with WD100 series measurement units - Data can be centrally collected in combination with existing environmental measurement units of the WD100 series. *For more details, please refer to the PDF document or feel free to contact us.*

• 企業：アイエスエイ
• 価格：Other

• Other FA equipment

Ributa Network Device Monitoring/Power Management Control Unit GB2105A

Automatic recovery and reboot of network devices such as routers, surveillance cameras, recorders, and remote PCs during abnormal situations made easier.

The GB2000 series is a reboot device that monitors abnormalities in network equipment such as routers, hubs, surveillance cameras, recorders, digital signage, and remote PCs over the network, and automatically restores power to recover in case of any detected anomalies. Additionally, it allows for power ON/OFF/reboot operations via remote commands. <Product Features> ■ Standard Gigabit LAN (supports IPv4/v6) ■ Monitors up to 64 services ■ Individual power control with two grounded outlets

• 企業：アイエスエイ
• 価格：Other

• LAN construction and wiring work
• Surveillance Camera System
• Server monitoring and network management tools

Air-fuel ratio control device

We provide a preset system that determines the opening degrees (16 points) of the gas and air control dampers through touch panel operation to control the air-fuel ratio. We are also developing a feedback system (automatic control based on gas and air flow). ■ Equipment Features - Reduction of spare parts and maintenance costs. - Improved operability, accuracy, and responsiveness. - Enhanced operability through touch panel operation. - Possible reduction of running costs compared to proportional valve systems. ■ Equipment Applications Air-fuel ratio control introduced in burner equipment.

• 企業：タナベ 本社（新潟県糸魚川市）、東京本部（東京都中央区）
• 価格：Other

• Other processing machines

[Laboratory Equipment Humidity Control Device] For university research laboratories and manufacturer development departments.

Weighing of powder materials under controlled humidity conditions, observation of the state of resins and paints by varying humidity conditions, and load testing of electronic materials.

It is possible to control humidity within small containers such as glove boxes, incubators, and acrylic containers. Therefore, it can be used for applications where humidity needs to be kept constant for weighing powdered materials, or for observing the state of raw materials by varying humidity conditions. We offer free demonstrations, so please feel free to contact us. ■ Inquiries about the product - Industrial Filter Sales Department, East Japan Sales Office TEL: 03-5568-9281 - Industrial Filter Sales Department, West Japan Sales Office TEL: 06-6533-0360

• 企業：KITZ MICROFILTER CORPORATION
• 価格：500,000 yen-1 million yen

• Environmental Test Equipment

Humidity control device for observing raw materials that are easily affected by humidity.

Control the humidity consistently within a localized space (such as an acrylic box or glove box)! It can also be used as a replacement for desiccants (silica gel, zeolite).

This is a device that controls humidity within a localized space at a constant level. It has a proven track record in observing various raw materials that are susceptible to humidity. The raw materials being observed include powders, electronic materials, adhesives, paints, resins, and more. ■ Main Use Cases - Since the weight of powders changes with humidity fluctuations, humidity control is desired during weighing. - How much can electronic materials withstand in a humid environment? - How does the curing of adhesives change when humidity conditions are altered? - How does the drying of paints change when humidity conditions are varied? - How does the curing of resins change when humidity conditions are modified?

• 企業：KITZ MICROFILTER CORPORATION
• 価格：500,000 yen-1 million yen

• Environmental Test Equipment

Omron NX/NJ Series

Achieving both high-speed control and effective information utilization!

■ Integration of sequence control and motion control Supports a wide range of needs with a CPU lineup of up to 256 axes ■ Integration of safety Equipped with Safety over EtherCAT, allowing for the coexistence of sequence control and safety control ■ Integration of machine control and information communication - Equipped with global standard networks in the industry, EtherNet/IPTM and EtherCAT - Equipped with the communication protocol OPC UA, standardized as IEC 62541 (available on some models) - Database connection CPU units can directly store production process data to SQL database servers at high speed - Realization of preventive maintenance systems and quality traceability systems ■ Unified development environment from motion, safety to sensing The automation software Sysmac Studio complies with the international standard IEC 61131-3 Supports motion control function blocks compliant with PLCopen Contributes to reducing programming man-hours through the provision of Sysmac Library, which encapsulates Omron's extensive know-how into function blocks.

• 企業：因幡電機産業 産機カンパニー
• 価格：Other

• PLC

[Data] Understanding Power Management with PDU and UPS through Manga!

A power strip that measures power consumption remotely and has added on/off control functionality!

This document is a story manga that presents solutions to various concerns using power management products such as PDUs and UPSs. It also introduces the features of the "ATEN PDU," which has added network access capabilities, and the "UPS," which provides backup power for a certain period during a power outage. We hope you can feel our commitment to providing solutions for concerns that seemed possible but were not achievable until now. 【PDU Features】 ■ Remote power On/Off control ■ Auto-Ping and Auto-Reboot functions ■ Power measurement ■ Remote monitoring ■ Delay control ■ Integrated management and visualization *For more details, please refer to the PDF document or feel free to contact us.

• 企業：ATENジャパン
• 価格：Other

• Other network tools

Slow Start Stop Revised Version

Method for controlling the starting current of a three-phase induction motor.

This is a guide for control devices for slow start-stop. With the three-phase induction motor (motor) now meeting the IE3 standard, the starting current has significantly increased. When updating fire hydrant pumps or smoke exhaust fans, I've heard that costs rise due to increasing generator capacity, adding inverters, and related harmonic measures. By controlling the voltage for the start and stop of pumps and blowers, the starting current can be reduced, and water hammer can be eliminated.

• 企業：橋本産業
• 価格：Other

• others

Mitsubishi Demand Monitoring and Control Device 'DEMACON'

Consolidating data recording and display functions into the main unit! By utilizing communication software, data management and current value display on a computer are possible.

We would like to introduce the Mitsubishi Demand Monitoring and Control Device 'DEMACON' that we handle. It clearly informs you of the demand management status through LED displays and graphic displays on an LCD. All operations, such as switching the LED display items, changing the LCD display content, printing with a printer, and basic settings for demand monitoring, are simple and can be done by just pressing buttons or turning a rotary switch. 【Features】 ■ Data recording and display possible on the main unit ■ Easy operation with buttons and rotary switches ■ Automatic load control possible on the main unit ■ Compatible with SD memory cards (DM-100CPW) ■ Built-in pulse detection function *For more details, please download the PDF or feel free to contact us.

• 企業：藤川伝導機
• 価格：Other

• Demand Monitoring
• Other process controls

Mitsubishi Electric Numerical Control Device 'E80 Series'

Equipped with Mitsubishi Electric's unique NC dedicated CPU with high-speed processing capabilities!

The "E80 Series" is a Mitsubishi Electric numerical control device designed to be simpler and easier to use, achieving high cost performance. It has significantly enhanced features, including standard high-precision control for lathes with milling functions. Additionally, features such as interactive cycle insertion allow for easy program creation, improving operator usability. 【Features】 ■ Significantly improved basic performance with a dedicated CNC CPU ■ Lineup according to machine configuration: Type A / Type B ■ Advanced design display unit / keyboard *For more details, please download the PDF or feel free to contact us.

• 企業：藤川伝導機
• 価格：Other

• Other process controls

Semiconductor Manufacturing Plant Example [Room Pressure Control Equipment] Room Pressure Controller PECX

Ensuring a super clean environment for equipment.

The strict clean environment required for manufacturing equipment due to the miniaturization of semiconductors has been efficiently achieved by precisely controlling the air pressure within the room and equipment. 【Features】 ○ Compact all-in-one type ○ Improved control and high precision ○ Enhanced operability ○ Increased convenience ○ Improved communication functions ○ Easy on-site installation *For more details, please refer to the PDF document or feel free to contact us.

• 企業：岡谷精立工業
• 価格：Other

• Other FA equipment

High-tech product factory case study [Room pressure control equipment] Room pressure controller PECX

Prevention of foreign object intrusion into ultra-precision devices

In manufacturing equipment that requires particularly high cleanliness levels within a clean room, the differential pressure between the room and the equipment is controlled to remain constant. 【Features】 ○ All-in-one type for compactness ○ Improved control and high precision ○ Enhanced operability ○ Increased convenience ○ Improved communication functions ○ Easy on-site installation *For more details, please refer to the PDF document or feel free to contact us.

• 企業：岡谷精立工業
• 価格：Other

• Other FA equipment

Incineration Ash Melting Facility Example [Room Pressure Control Equipment] Room Pressure Controller PECX

Prevention of odor diffusion during garbage storage

Household waste collected will be temporarily stored in the pit. During this process, the internal pressure of the pit will be controlled to negative pressure to prevent any unpleasant odors from leaking outside. 【Features】 ○ All-in-one type for compactness ○ Improved control and high precision ○ Enhanced operability ○ Increased convenience ○ Improved communication functions ○ Easy on-site construction *For more details, please refer to the PDF document or feel free to contact us.

• 企業：岡谷精立工業
• 価格：Other

• Other FA equipment

Food and Beverage Factory Case Study [Room Pressure Control Equipment] Room Pressure Controller PECX

Prevention of contamination by bacteria and other microorganisms.

In factories that manufacture sterile preparations and raw powders, differential pressure control is implemented to prevent contamination, following the same standards as pharmaceutical factories. 【Features】 - Compact all-in-one type - Improved control and high precision - Enhanced operability - Increased convenience - Improved communication functions - Easy on-site construction *For more details, please refer to the PDF document or feel free to contact us.

• 企業：岡谷精立工業
• 価格：Other

• Other FA equipment