Last Updated： Aggregation Period:Jun 24, 2026～Jul 21, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 24, 2026～Jul 21, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 24, 2026～Jul 21, 2026
This ranking is based on the number of page views on our site.
541～570 item / All 1367 items
MDC Series Downconverter for Automotive Radar
It converts millimeter wave signals in the 76-81 GHz range, such as those from vehicle-mounted radar, into a measurable frequency range (a few GHz) using an oscilloscope or spectrum analyzer, enabling signal analysis. *For more details, please download the PDF or feel free to contact us.*
Moxa rotary switch to switch between pull high/low resistance! Wide temperature model operating in environments from -40 to 85℃.
Moxa's "ICF-1150 Series" is an RS-232/422/485 to fiber converter that can transfer RS-232/RS-422/RS-485 signals to a fiber optic port. It supports single-mode and multi-mode fiber with different transmission distances. It is equipped with a rotary switch to set pull-up/pull-down resistors for three-way communication and on-site installation. 【Features】 ■ Three-way communication: RS-232, RS-422/485, fiber ■ Rotary switch to toggle pull-up/pull-down resistors ■ Extends RS-232/422/485 transmission up to 40 km in single-mode and up to 5 km in multi-mode ■ Wide temperature model operating in environments from -40 to 85°C ■ Complies with C1D2, ATEX, and IECEx standards for harsh industrial environments *For more details, please refer to the PDF document or feel free to contact us.
[Moxa] Achieving redundancy with dual power input! Converting CAN signals to fiber and fiber to CAN signals.
Moxa's "ICF-1170I Series" is an industrial CAN-to-fiber converter used to convert CAN signals from copper wire to optical fiber. The converter features 2kV optical isolation protection for the CAN bus system and a dual power input with alarm contact relay to keep the CAN bus system online. Additionally, the fiber test mode allows for easy verification of whether the fiber cable between two ICF-1170I units is transmitting data correctly. 【Features】 ■ Data transfer up to 2km over optical fiber ■ Converts CAN signals to fiber and fiber back to CAN signals ■ Maximum baud rate of 1Mbps ■ Dual power input for redundancy ■ DIP switch with terminal resistance of 120Ω *For more details, please refer to the PDF documentation or feel free to contact us.
Moxa equipped with redundant fiber ring! Achieves prevention of packet loss with zero recovery time.
Moxa's "ICF-1280I Series" is an industrial PROFIBUS to fiber converter equipped with redundant fiber ring technology. Abnormalities in the fiber cable can be automatically detected and identified by LED indicators, even if they are not adjacent to the converter. By examining the fiber connections of the entire topology from individual converters, the time spent on troubleshooting is significantly reduced. 【Features】 ■ Zero recovery time redundant fiber ring ■ Extends fiber communication from a single converter to the entire network ■ Automatic baud rate detection and data speed of up to 12 Mbps ■ PROFIBUS fail-safe to prevent corruption of datagrams from functioning segments ■ Alarm notification via relay output *For more details, please refer to the PDF document or feel free to contact us.
Moxa supports the use of both serial port power and external power! It prevents harmful effects from RF radiation and electromagnetic radiation.
Moxa's "TCF-90 Series" is a compact media converter that transmits RS-232 signals over fiber optic cables. By using a serial port or external power supply, the transmission distance of RS-232 can be extended up to 5 km with multimode fiber and up to 40 km with single-mode fiber. Additionally, using a pair of TCF-90 units, two RS-232 devices can be connected to fiber optics in full-duplex mode. 【Features】 ■ Compatible with both serial port power and external power supply ■ Extends RS-232 transmission distance up to 40 km with single-mode (TCF-90-S) and up to 5 km with multimode (TCF-90-M) ■ Reduces signal interference ■ Protects against electrical interference and chemical corrosion ■ Compact size *For more details, please refer to the PDF document or feel free to contact us.
Moxa RS-232 to RS-422/485 converter! It has a compact size and supports external power supply.
Moxa's media converter, the TCC-80/80I series, provides complete signal conversion between RS-232 and RS-422/485 without the need for an external power supply. It supports both half-duplex 2-wire RS-485 and full-duplex 4-wire RS-422/485, with conversion possible between the TxD and RxD lines of RS-232. Automatic data direction control is provided for RS-485, where the RS-485 driver automatically activates when the circuit detects a TxD output from the RS-232 signal, eliminating the need for programming work to control the transmission direction of RS-485 signals. 【Features】 ■ Powered converter, also supports external power supply ■ Compact size ■ Supports conversion between RS-422 and 2/4-wire RS-485 ■ Automatic data direction control for RS-485 *For more details, please refer to the PDF document or feel free to contact us.
Moxa slide-in module that can convert 10/100BaseT(X) to 100BaseFX (SC/ST connector)!
Moxa's "CSM-200 Series" is a slide module type Ethernet to fiber media converter that can be housed in the NRack System. The module can convert 10/100BaseT(X) to 100BaseFX (SC/ST connector) and can be installed in the NRack System chassis. It features hot-swappable functionality and supports auto-negotiation. 【Features】 ■ LFP (Link Fault Pass-Through) and FEF (Remote Fault) ■ Two different operating modes: Store & Forward and Pass-Through ■ Supports auto-negotiation ■ Plug and play ■ Hot-swappable functionality *For more details, please refer to the PDF materials or feel free to contact us.
Moxa LFP function equipped! It can be easily mounted on DIN rails or distribution boxes.
Moxa's "IMC-21A Series" is an entry-level 10/100BaseT(X) to 100BaseFX media converter. It is designed to achieve reliable and stable operation in harsh industrial environments. With its robust hardware design, it can operate reliably over a wide temperature range of -40 to 75°C, and it can be easily mounted on DIN rails or in distribution boxes. 【Features】 ■ Supports multi-mode or single-mode, SC or ST fiber connectors ■ Equipped with LFP (Link Fault Pass-Through) function ■ Operating temperature range: -40 to 75°C (for -T model) ■ DIP switch allows selection of FDX/HDX/10/100/Auto/Force *For more details, please refer to the PDF document or feel free to contact us.
Moxa: Robust hardware design! Ensures durability against harsh industrial conditions.
Moxa's "IMC-21 Series" is an entry-level 10/100BaseT(X)-100BaseFX media converter. It is designed to achieve reliable and stable operation in harsh industrial environments, supporting power input of 12 or 48VDC, and providing a cost-effective solution with reliable operation in a temperature range of -10 to 60°C. The robust hardware design ensures durability against the harsh industrial conditions of your Ethernet devices. It can also be easily mounted on DIN rails or in distribution boxes. 【Features】 ■ Supports multi-mode or single-mode, SC or ST fiber connectors ■ Equipped with LFP (Link Fault Pass-Through) function ■ DIP switch allows selection of FDX/HDX/10/100/Auto/Force *For more details, please refer to the PDF document or feel free to contact us.
Moxa: Easily realize various communication scenarios! No need to understand the baud rate.
Moxa's CAN to Fiber Converter 'ICF-1171I Series' is used in pairs to connect two CAN 2.0 or CAN FD devices or networks via single-mode or multi-mode optical fiber. This product provides 2kV isolation protection for the interface and dual power input to ensure that the CANbus system operates without interruption. The total transmission distance of CAN 2.0 or CAN FD systems can be extended up to 2km or 40km using the ICF-1171I converter, regardless of the baud rate. 【Features】 ■ Data transfer over optical fiber up to 40km ■ Converts CAN signals to fiber and fiber to CAN signals ■ Supports CAN 2.0A, CAN 2.0B, and CAN FD, compliant with ISO11898 ■ Supports automatic baud rate detection via CAN 2.0 ■ Maximum CAN 2.0 arbitration rate of 1Mbps *For more details, please refer to the PDF documentation or feel free to contact us.
You can link up to 32 serial ports to UPort without a power adapter!
We would like to introduce the Moxa 'UPort 1600-8-G2 Series' that we handle. It is suitable for notebook PCs and workstation computers that require serial port expansion, and it comes with a USB cable featuring a latch and screw lock. Additionally, it can convert USB to RS-232/422/485, ensuring compatibility with traditional serial devices, and it can be used in measurement and POS applications. 【Features】 ■ SuperSpeed USB 3.2 compatible ■ Improved performance with 512-byte on-chip FIFO cache and flow control ■ Drivers available for a wide range of operating systems, including Windows and Linux ■ Baud rates from 50bps to 921.6kbps (supports non-standard baud rates) ■ Dual-sided LED indicators placed at the corners display power, TX, and RX status *For more details, please refer to the PDF materials or feel free to contact us.
Latching USB cable design for a more secure connection! Capable of converting from USB to RS-485.
Moxa's USB to Serial Converter 'UPort 1200-G2 Series' is ideal for notebook PCs and workstation computers that require serial port expansion. Drivers are provided for a wide range of operating systems, including Windows and Linux. All products are compatible with traditional serial devices and can be used in measurement and POS applications. 【Features】 ■ USB 3.2 SuperSpeed compatible ■ Baud rates from 50bps to 921.6kbps (supports non-standard baud rates) ■ Improved performance with 512-byte on-chip FIFO cache and flow control ■ Dual-sided LEDs positioned at the corners display power, TX, and RX status ■ Drivers are provided for a wide range of operating systems, including Windows and Linux *For more details, please refer to the PDF document or feel free to contact us.
Equipped with various convenient features! Providing solutions with high added value.
Moxa's "IMC-P21A-G2 Series" is a PoE+ high-speed Ethernet to fiber media converter designed to provide reliable and stable 10/100BaseT(X) to 100Base-FX media conversion. Classified as a Power Sourcing Equipment (PSE), it directly supplies power to Powered Devices (PD), eliminating the need for additional wiring. In standard mode, it supplies up to 30W of power to the PoE+ port, enabling up to 36W of high output for heavy-duty industrial PoE devices such as weatherproof IP surveillance cameras with wipers/heaters, high-performance wireless access points, and IP phones. 【Features】 ■ 10/100BaseT(X) auto-negotiation and automatic MDI/MDI-X ■ Compliant with IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) standards ■ Up to 36W output per PoE+ port ■ Supports store-and-forward mode and pass-through mode ■ Operating temperature range: -10 to 60℃ *For more details, please download the PDF or feel free to contact us.
In standard mode, it supplies up to 30W of power to the PoE+ port! Providing solutions with high added value.
Moxa's "IMC-P21GA-G2 Series" is classified as a Power Sourcing Equipment (PSE) and is a PoE+ Gigabit Ethernet to Fiber Media Converter that directly supplies power to Powered Devices (PD) without the need for additional wiring. It is designed to provide reliable and stable media conversion from 10/100/1000BaseT(X) to 100/1000Base-SX/LX or 100/1000Base SFP module. Data transmission can occur over distances of up to 80 km from the device to the control center in an EMI-resistant manner. 【Features】 ■ 10/100BaseT(X) auto-negotiation and automatic MDI/MDI-X ■ Compliant with IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) standards ■ Up to 36 W output per PoE+ port ■ Supports store-and-forward mode and pass-through mode ■ Operating temperature range: -10 to 60℃ ■ Redundant dual DC power input *For more details, please download the PDF or feel free to contact us.
Introduction to WEG products with excellent energy efficiency.
WEG has released a new AC/DC converter, the 'TPD500'. It breathes new life into existing DC motors and enables smooth integration into modern industrial equipment. It is compatible with the conventional model "TPD32-EV," allowing for updates without significantly changing the installation layout. This solution is ideal for making reliable improvements while keeping time and costs associated with implementation low. We encourage you to consider this product, which boasts high performance, scalability, and reliability.
It converts linear polarization to radial polarization (radial polarization) and azimuthal polarization (azimuthal polarization)!
The "Radial Polarization Converter" converts linear polarization into radial polarization (cylindrical polarization) or azimuthal polarization (orientational polarization). Radial and azimuthal polarizations increase efficiency in laser processing, making them suitable for micromachining and super-resolution optical microscopy. It is also possible to use them in optical tweezers to enhance optical trapping efficiency. 【Features of Radial and Azimuthal Polarization】 ■ Increases efficiency in laser processing ■ Suitable for super-resolution optical microscopy ■ Can be used in optical tweezers to enhance optical trapping efficiency *For more details, please refer to the PDF document or feel free to contact us.
By using light-aligned materials, it is relatively possible to create central defects!
The "radial polarization converter," also known as a q-plate (axisymmetric half-wave plate), is a phase difference element. By converting incident light into linear polarization, it can generate radial polarization or azimuthal polarization with a donut-shaped intensity distribution, where linear polarization is distributed within the beam cross-section. On the other hand, when circularly polarized light from a plane wave is incident, it can generate a special type of light with a helical phase, known as an optical vortex. 【Features】 ■ The use of optical alignment materials allows for relatively easy production of central defects. ■ The materials are compatible with automotive specifications, ensuring high reliability. *For more details, please download the PDF or feel free to contact us.
UL/CUL FCC CE SAA CCC PSE CB EK/KC certified, manufactured in an ISO 9001 certified factory.
This is an AC adapter with international safety certification. It meets numerous safety standards. It has overcurrent, overvoltage, and short-circuit protection features. There is a wealth of adoption records from major electronics manufacturers. We handle many products with the PSE mark as per the Electrical Appliance and Material Safety Law. Customization: AC pin selection available: fixed type & switchable type DC plug shape selection available Custom support such as specifying Japanese capacitors is possible Logo printing Plug connection Change in wire length Center negative (reverse polarity) (High-capacity connectors, high mating connectors, EIAJ plugs, Canon connectors, XLR, Hirose, SMK, DIN, mis-mating prevention plugs, anti-pull lock type, screw type, etc.) [Applications] For products such as PDAs, digital cameras, CD/MP3 players, CDMA devices, instruments, network equipment (switches, routers), modems, scanners, etc. *Please feel free to contact us for more details. Operating environment: *Operating temperature: 0℃-40℃, fully loaded, normal operation *Storage temperature: -40℃-85℃ (with case) *Operating humidity: 5% (0℃) - 95% (40℃)
The cooling method is natural air cooling! We introduce a DC/DC converter with a rated input voltage of DC12V!
We would like to introduce the DC/DC converter 'NVD-SC12' manufactured by Arus Corporation. As for the input specifications/characteristics, the rated input voltage is DC12V, and the allowable input voltage range is DC9.6 to 16V. Additionally, the dimensions (H×W×D) are 34×65×101mm, and the weight is 290g. We also offer a wide range of products with various input options. Please feel free to contact us when needed. 【NV Series Features】 ■ Unique case structure and terminal block connection for the DC/DC converter ■ Wide input lineup including DC12/24/48V ■ Limited to 100W, pursuing thorough miniaturization for the smallest class size *For more details, please refer to the PDF materials or feel free to contact us.
The fixed input voltage is DC 5 to 12V! The allowable input voltage range is a DC/DC converter with DC 4.5 to 16V!
Here is an introduction to the DC/DC converter 'OGS1R5-0512' manufactured by Arus Corporation. As for the input specifications/characteristics, the rated input voltage is DC 5 to 12V, and the allowable input voltage range is DC 4.5 to 16V. The dimensions (H×W×D) are 9.5×25×12.2mm, and the weight is 3g. Please feel free to contact us if you have any inquiries. 【OG Series Features】 ■ Wide input range equipped in a compact on-board DC/DC converter ■ Achieved 60% miniaturization compared to conventional products *For more details, please refer to the PDF document or feel free to contact us.
The fixed input voltage is DC 5 to 12V! A DC/DC converter with dimensions (H×W×D) of 10×35.2×18.1mm!
We would like to introduce the DC/DC converter 'OGS6R0-0512' manufactured by Arus Corporation. As for the input specifications/characteristics, the rated input voltage is DC 5 to 12V, and the allowable input voltage range is DC 4.5 to 16V. The dimensions (H×W×D) are 10×35.2×18.1mm, and the weight is 5g. Please feel free to contact us if you have any inquiries. 【OG Series Features】 ■ Equipped with a wide input range in a compact onboard DC/DC converter ■ Achieved a 60% reduction in size compared to conventional products *For more details, please refer to the PDF materials or feel free to contact us.
The allowable input voltage range is DC 8 to 32V! A DC/DC converter with dimensions (H×W×D) of 11×42.8×21mm!
We would like to introduce the DC/DC converter 'OGS10-1224' manufactured by Ars Corporation. As for the input specifications/characteristics, the rated input voltage is DC 12 to 24V, and the allowable input voltage range is DC 8 to 32V. The dimensions (H×W×D) are 11×42.8×21mm, and the weight is 7g. Please feel free to contact us when you need assistance. 【OG Series Features】 ■ Equipped with a wide input range in a compact onboard DC/DC converter ■ Achieved a 60% reduction in size compared to conventional products *For more details, please refer to the PDF document or feel free to contact us.
It can store 12 units in 1U! Space-saving design allows for installation in various locations.
The "TMC Series" is a media converter suitable for outdoor use in a box. It achieves a guaranteed operating temperature range of -20 to +60°C. The "TMC102 Series" allows switching between store-and-forward mode and cut-through mode using DIP switches. With a compact size of 51×71×19.5mm, it comes standard with a strain relief clamp on the DC jack side. 【Features】 ■ The subrack chassis achieves -10 to 60°C ■ A variety of options available for wall mounting and DIN rail mounting ■ Compact size ■ Space-saving design allows for installation in various locations ■ Uses a power disconnection prevention code *For more details, please refer to the PDF document or feel free to contact us.
Space-saving implementation area! Three types available: 4.5–18VDC, 9–36VDC, and 18–76VDC.
The "CCG Series (1.5W/3W)" is an ultra-compact, isolated DC-DC converter with a wide input voltage range. It allows for space-saving on the mounting area, and offers three types of input voltage ranges: 4.5–18VDC, 9–36VDC, and 18–76VDC. Additionally, we also offer a "15W/30W" model with a six-sided shield structure designed to consider noise. 【Features】 ■ Ultra-compact & space-saving mounting area ■ Wide operating temperature range: ambient temperature -40℃ to +100℃ ■ Mounting terminal types ・ SMD type (suitable for reflow soldering) ・ DIP type (suitable for flow soldering) ■ Voltage withstand (between input and output, for 1 minute) ・ 1,500VDC or 1,000VAC * For more details, please refer to the PDF materials or feel free to contact us.
Wide input/output and step-up/down type! Achieves 300W output with industry-standard 1/16 brick pin configuration.
The "i7C Series" is a non-isolated DC-DC converter suitable for battery operation. It allows for seamless switching between boost, buck-boost, and buck modes, with an input voltage range of 9 to 53 VDC. Achieving 300W output with an industry-standard 1/16 brick pin configuration, it contributes to long battery operation with ultra-low standby current (below 0.25 mA). 【Features】 ■ Seamless switching between boost, buck-boost, and buck modes ■ Wide input voltage range: 9 to 53 VDC ■ Wide output voltage range - 9.6 to 48 VDC type - 5 to 28 VDC type ■ Low power consumption ■ Safety standards: UL/CSA/IEC62368-1 (EN62368-1: CB and certification) certifications *For more details, please refer to the PDF document or feel free to contact us.
Unwavering "safety" and "trust"! DC-DC power supply compliant with vibration and shock test standards in railway applications.
The "RDS-A Series" is a unit-type DC-DC power supply designed with railway applications in mind. It complies with vibration and shock test standards. It features remote ON/OFF control and input protection functions that allow for reverse connection and surge current suppression. Additionally, we offer EMC filters for power lines, along with box-type models such as the "RSEV Series" and "RSHN Series." 【Features】 ■ Complies with railway-related vibration and shock test standards - Conforms to JIS-E 3014-2-B and 3015-2 - Complies with IEC61373 Category 1 Grade B (EN50155 requirements) ■ Functions - Remote ON/OFF control (floating) - Input protection: reverse connection and surge current suppression - Output protection: overvoltage and overcurrent *For more details, please refer to the PDF document or feel free to contact us.
Significantly miniaturized and made more efficient insulated DC-DC converters through ON-ON / ON-OFF operation modes [Simple calculation tool and technical materials provided].
This method uses a low permeability powder core "MBS" in the main transformer and adopts ON-ON / ON-OFF operating modes, enabling the miniaturization of magnetic components to about 1/3 and the power board size to about 2/3 compared to conventional circuits (according to our estimates). In addition to achieving space-saving in the power circuit without increasing the operating frequency, further miniaturization is possible by increasing the operating frequency. It is possible to achieve a compact and high-efficiency DC-DC converter without using SiC or GaN, while still using general-purpose Si. 【Features】 ■ Realizes miniaturization and high efficiency of DC-DC converters (power circuits) ■ By suppressing the amplitude of the excitation current, it also achieves a reduction in ΔB (change in magnetic flux density) and the resulting low loss ■ The output ripple current is approximately halved compared to conventional technology, allowing for a reduction of the output capacitor by half ★ We are currently offering a simple calculation tool. Please contact us if you are interested. You can also view technical materials by clicking the "Download Catalog" button. ★ We will be exhibiting at the Techno Frontier Power System Exhibition and will also be speaking at the organizer's seminar. For more details, please refer to the basic information section.
SMILE Vへの伝票入力の手間を大幅削減！伝票コンバーターで、効率アップとミス削減を実現！
【伝票コンバーター】は、大塚商会様の基幹業務システム「SMILE V」を使用する中小企業向けのシステムです。 クライアントから受け取った納品書や発注書などのデータを、「SMILE V」で取り込めるデータ形式に瞬時に変換します。 これにより、手入力作業の手間とミスを大幅に削減し、それらにかかっていた時間を大幅に削減します。 さらに、手入力作業が不要になることで、時間の節約と正確性の向上を実現します。 特に、入力業務の負担や属人化に課題を感じる企業様には最適です。 当社は、設立から30年以上の歴史を持ち、工具の卸売、設計、開発、製造、中国との貿易、 そしてAI、IT、IoTシステムの開発およびコンサルティングを行ってきました。 これまでに、車両メーカーや建機メーカーなどの製造業と多くの取引を行い、高い品質基準と要望に応える力が評価されています。 長年の経験と実績を持つ当社に業務のDX化をおまかせください。
Easily wirelessize field network communication! Achieve high reliability and low latency through the use of multiple wireless connections.
The "RP-WEE-SR1" is an industrial Ethernet wireless converter that can wireless-enable field networks where real-time communication, such as PROFINET, is crucial. By utilizing three different frequency bands—IEEE802.11n 2.4GHz, 5.2GHz, and DECT 1.9GHz—along with proprietary encoding technology, it achieves low-latency communication with significantly reduced packet loss rates. It allows for easy wireless conversion of wired LAN and digital signals, supports 1-to-N connections, and is compatible with wide-range power supplies. 【Features】 ■ Easily wireless-enable wired LAN and digital signals ■ Supports 1-to-N connections ■ Compatible with wide-range power supplies *For more details, please download the PDF or feel free to contact us.
For those who want to support high insulation but are struggling with power supply miniaturization! Introducing a high-voltage, high-insulation DC-DC converter.
The "MH Series" is a compact, general-purpose, high-isolation DC-DC converter with a maximum inter-terminal capacitance of 20pF, resulting in low leakage current. It is suitable for measuring instruments that require high isolation between input and output. It can also be used in devices where high voltage is constantly applied between input and output. Due to its compact package, it optimizes the board area, and the input/output pin configuration is common (SIP8) for both 3W and 6W models, allowing for replacement without changing the circuit board. 【Features】 ■ Suitable for measuring instruments that require high isolation between input and output ■ Usable in devices where high voltage is constantly applied between input and output ■ Low leakage current due to a maximum inter-terminal capacitance of 20pF *For more details, please download the PDF or feel free to contact us.
