We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Cutting machine.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Cutting machine×奥村機械製作所 - List of Manufacturers, Suppliers, Companies and Products

Cutting machine Product List

16～28 item / All 28 items

Displayed results
Right Angle Cutting Machine "UCA-300/400 Model"

Right Angle Cutting Machine "UCA-300/400 Model"

Four-stage cutting stroke is selectable! Air-hydro type undercut saw.

The UCA-300 and UCA-400 models are dedicated cutting machines designed specifically for aluminum sash cutting, focusing on cutting speed and the quality of the cut surface. ■ UCA-300 Model Cutting Capacity: Height 145mm × Width 300mm ■ UCA-400 Model Cutting Capacity: Height 145mm × Width 400mm ■ Circular Saw: 510mm ■ Motor: 2.2 kW ■ Blade Movement: Air-Hydro System The blade shaft movement section is finished with precision ground round shafts that are treated with hard chrome plating, allowing for light and accurate cutting operations over an extended period. The chips generated during cutting are collected through a φ150 duct hose connection to a separate dust collector. Additionally, the UCA-300DC and UCA-400DC models, which include a built-in simple dust collection device, have been added to the lineup. ■ Please check the related page for videos of cutting machines with built-in dust collection devices. The cutting chips are collected in a barrel inside the machine by an internal fan. 【Features】 ■ The circular saw is covered due to the lower saw movement, allowing operators to perform cutting tasks safely.

  • Plastic processing machines (cutting and rolling)
  • Resin processing machine
  • Wood processing machinery

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fully Automatic Cutting Machine "ACPKF-300 Model"

Fully Automatic Cutting Machine "ACPKF-300 Model"

Just set the materials! A cutting machine that can automatically feed and cut materials.

The "ACPKF-300 model (front arm-less type)" is a fully automatic cutting machine equipped with an automatic fixed-length feeding device. The blade shaft travel guide uses linear ways, allowing it to maintain cutting precision over a long period. Additionally, stable cutting and material feeding are achieved through an air-hydraulic cylinder. We also handle the radial arm saw type "ACF-300 model." 【Features】 ■ The travel guide of the material feeding device uses hardened and polished guides and shafts, enabling precise feeding. ■ Stable cutting and material feeding are possible with the air-hydraulic cylinder. ■ The blade shaft operates on a belt drive system, allowing for heavy cutting by increasing the power of the drive motor. ■ The table surface is finished with hard chrome plating, minimizing scratches on the material. *For more details, please refer to the PDF document or feel free to contact us.

  • Plastic processing machines (cutting and rolling)
  • Resin processing machine
  • Wood processing machinery

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ACPW500-60 | High-speed, high-precision mass production compatible double-headed circular saw cutting machine

ACPW500-60 | High-speed, high-precision mass production compatible double-headed circular saw cutting machine

High-performance double-head cutting machine optimal for mass production and high-precision cutting.

The ACPW500-60 is a high-performance double-head cutting machine equipped with an automatic length adjustment feature for the movable head. Its high rigidity structure and high-precision positioning enable high-quality cutting processes for materials such as aluminum, resin, and wood. Key Features and Characteristics ◆ Basic performance supporting high-precision cutting - Electronic length adjustment of the X-axis via a geared motor - Accurate head positioning with an absolute magnetic scale measurement system - Smooth cutting operation with air-hydraulic saw blade feed - Maximum cutting length: 6,000mm - Saw blade diameter: 405mm (carbide blade) × 2 pieces - Saw blade motor output: 2.2kW × 2 units ◆ Reliable fixation of profiles - Standard equipment includes two upper clamps (with pressure relief valves) - Optional horizontal clamps and additional clamps available

  • Wood processing machinery
  • Plastic processing machines (cutting and rolling)
  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aluminum cutting machine with automatic feed and fixed size device UCACHM400-52

Aluminum cutting machine with automatic feed and fixed size device UCACHM400-52

Revolution in aluminum cutting! No scratches, no noise, no cost! Let's solve your cutting problems with Okumura Machinery's aluminum-specific cutting machine.

The aluminum frame cutting machine from Okumura Machinery Manufacturing is the ideal machine for cutting aluminum materials. It adopts our unique new transport method, which prevents scratches on the aluminum during transport with rollers. Additionally, it incorporates features that enhance cutting precision and saw blade lifespan, contributing to reduced manufacturing costs. This machine meets customer needs as a high cost-performance dedicated aluminum cutting machine. **Features of the Automatic Feed Carbide Circular Saw Cutting Machine** Below are the main features of this machine: - Our newly developed transport method prevents scratches on aluminum materials. - Clamping on both sides of the blade improves stability during cutting and extends saw blade life. - Under-saw cutting reduces noise. - Semi-dry lubrication is environmentally friendly and makes subsequent processes easier. - The saw blade feed mechanism using ball screws allows for adjustment of cutting speed and precision. - The fixed-length mechanism powered by a servo motor enables accurate setting of cutting dimensions. - The workpiece lift device during transport prevents scratches when feeding materials.

  • Plastic processing machines (cutting and rolling)
  • Other processing machines
  • Special Processing Machinery

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
UCK-T250 | Copper Pipe Fixed-Length Cutting Machine

UCK-T250 | Copper Pipe Fixed-Length Cutting Machine

It is a cutting machine that can cut long materials quickly, safely, and accurately. It is secured by an upper clamp device that also serves as a cover, allowing for safe operation.

Copper Pipe Circular Saw Cutting Machine "UCK-T250 Type" Length Measuring Device "APKS3000" A dedicated cutting machine for right angles with a horizontal sliding circular saw. It can cut non-ferrous metals, aluminum profiles, copper pipes, plastics, plywood, and more. Achieves beautiful cutting surfaces without burrs at high speed through chip saw cutting. ■ Can connect the easy and convenient length measuring stopper APKS type. ■ Safe and comfortable operation with clamps on both sides. ■ Achieves top-class compactness. ■ Suitable for diverse and small-lot production.

  • Plastic processing machines (cutting and rolling)
  • Other Auto Parts
  • Heat exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
UCACHM400-52 | Automatic Feed Aluminum Frame Cutting Machine with Fixed Dimensions

UCACHM400-52 | Automatic Feed Aluminum Frame Cutting Machine with Fixed Dimensions

High-speed automatic cutting of aluminum frame material using a high-precision fixed-length device.

Okumura Machinery Manufacturing's aluminum frame cutting machine is the ideal machine for cutting aluminum materials. Once the material is set, it can automatically feed and cut according to the program, contributing to labor savings. It adopts our unique new transport method, which prevents scratches on aluminum materials during transport. Additionally, it has been designed to enhance cutting accuracy and saw blade lifespan, contributing to reduced manufacturing costs. This machine meets customer needs as a high cost-performance dedicated aluminum cutting machine. **Features of the Automatic Feed Carbide Circular Saw Cutting Machine** The following are the main features of this machine: - Our newly developed high-rigidity body and transport method prevent scratches on aluminum materials. - Clamping on both sides of the blade improves stability during cutting and extends saw blade life. - Under-saw cutting reduces noise. - Semi-dry cutting oil lubrication is environmentally friendly and makes subsequent processes easier. - The saw blade feeding mechanism using a ball screw allows for adjustment of cutting speed and precision. - The fixed-length mechanism using a servo motor enables precise setting of cutting dimensions. - The workpiece lift device during transport prevents scratches when feeding materials.

  • 下鋸ランニングdoca00372120220120145955_001.jpg
  • c-lipped-channel-ge3daac38a_1920.jpg
  • Plastic processing machines (cutting and rolling)
  • Other machine tools
  • Special Processing Machinery

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
UCA-T400R | 400mm Width Compatible Wide Copper Bar Cutting Machine

UCA-T400R | 400mm Width Compatible Wide Copper Bar Cutting Machine

The circular saw can perform cutting operations safely and at high speed while being covered by a cover. It is a copper bar cutting machine that can accommodate heights of up to 15 mm and widths of up to 400 mm.

The "UCA-T400R model" is a dedicated machine for cutting conductor materials such as copper strips and busbars at high speed and with high precision. ✅ Cutting size: Compatible with copper bars of t15mm × maximum width of 400mm ✅ Beautiful cutting surface with a chip saw: Reduces the occurrence of burrs and edges, resulting in a very clean finish ✅ High-speed cutting performance: Capable of cutting t15mm copper bars at a feed rate of 30mm/second ✅ Space-saving design: Achieves compactness of the main unit by adopting a spindle motor, suitable for limited installation spaces ✅ Chip collection: Chips generated during cutting are collected in a pull-out dust box ✅ Automatic length setting device APKS3000-20R (optional): By adding an automatic length setting device with step feed functionality, setup time is reduced and high-precision positioning is made possible With this single machine, both quality improvement and processing cost reduction are achieved. It is a highly reliable cutting solution that dramatically enhances productivity in copper processing sites. ✅ An ultra-compact version (UCA-T250R) that supports cutting widths up to 250mm is also available! Please check the related page below for more information.

  • Plastic processing machines (cutting and rolling)
  • Switchboard
  • Press Dies

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
UCK-MF200 | Feed Vice Type Aluminum Cutting Machine

UCK-MF200 | Feed Vice Type Aluminum Cutting Machine

Automatic undercut saw for efficiently and mass cutting aluminum profiles and solid materials.

The UCK-MF200 ultra-hard circular saw cutting machine efficiently cuts large quantities of aluminum profiles with its powerful motor and large-diameter saw blade. ■Features ○ Continuous cutting is possible with simple program input. ○ Equipped with a standard feeding vice (stroke 500mm). ○ Can store up to 100 patterns for processing programs that accommodate different dimensions. ○ The reliable "lower saw slide cutting" method ensures stable cutting and extends saw life. ○ The material feeding vice protects the workpiece surface through a profile lifting system. ○ A wide cutting range allows for cutting a variety of shapes. ■Other Functions - Automatically stops when cutting is complete. - The feeding vice is controlled by a servo axis, allowing adjustment of transport speed and part length.

  • UCK-MF200DSCF1108.jpg
  • UCK-MF200DSCF1111.gif
  • 下鋸ランニングdoca00372120220120145955_001.jpg
  • UCK-MF200IMG_8468.jpg
  • Plastic processing machines (cutting and rolling)
  • Other processing machines
  • Forging Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
UCTS-K1000A | 1000 Slide Saw | Aluminum Plate Cutting Machine

UCTS-K1000A | 1000 Slide Saw | Aluminum Plate Cutting Machine

Cutting a plate material with a maximum thickness of 70mm and a width of 1000mm in one swift cut at high speed!

The "UCTS-K1000A model" is a dedicated circular saw machine that moves the table to perform high-speed cutting with a powerful motor. It achieves a clean cutting surface without burrs using a dedicated saw blade. ■ Cutting dimensions: Width 1000mm × Thickness 70mm ■ Blade diameter: 405mm 【Features】 ■ Cutting is performed by sliding the table and using the saw blade ■ The table slide is assisted by an electric motor, making cutting easy ■ Accurate cutting is possible by measuring dimensions with a magnetic scale (optional) ■ Capable of handling everything from aluminum sheet cutting to plastic sheet cutting with machine specification changes.

  • DSCF0712.jpg
  • IMG_1412.jpg
  • Plastic processing machines (cutting and rolling)
  • Other processing machines
  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
UCA-300DC/400DC | Integrated Dust Collection System Aluminum Cutting Machine

UCA-300DC/400DC | Integrated Dust Collection System Aluminum Cutting Machine

Space-saving, clean, and high precision! Dramatically improve the environment and work efficiency on-site.

The UCA-400DC is a cutting machine integrated with a dust collection device that collects dust and chips generated during the cutting of aluminum sashes and profiles by suctioning them into a barrel. Its patented dust collection structure (Patent No. 7572599) keeps the work environment clean and minimizes the impact on surrounding equipment and workers. The need for conventional stationary dust collectors is eliminated, significantly reducing the installation area. It achieves a balance of space-saving and high-precision processing, enabling safe, comfortable, and highly efficient aluminum processing in factories. ✅ Features - Efficient dust collection: Achieves a maximum chip recovery of 20L. Easy to handle with a barrel can design. - Energy-saving design: Significantly reduces power costs with a small fan (0.2kW). - Automatic operation function: The fan operates in conjunction with the blade rotation, eliminating worries about forgetting to turn it on. - High suction efficiency: Sustains suction power with a cyclone effect. No filter required, reducing maintenance burden. - Easy chip disposal: Can be processed with one touch without getting hands dirty. - Improved safety: Protects the circular saw with a cover, ensuring safety during operation.

  • DSCF0355.jpg
  • Copilot_20250716_124348.png
  • 下鋸ランニングdoca00372120220120145955_001.jpg
  • Plastic processing machines (cutting and rolling)
  • Other processing machines
  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Automatic Saw Non-Ferrous Metal Fully Automatic Circular Saw Cutting Machine UCK-MF200

Automatic Saw Non-Ferrous Metal Fully Automatic Circular Saw Cutting Machine UCK-MF200

Automatic undercut saw for efficiently and mass cutting aluminum profiles and solid materials.

The UCK-MF200 ultra-hard circular saw cutting machine efficiently cuts large quantities of aluminum profiles with its powerful motor and large-diameter saw blade. ■Features - Continuous cutting is possible with simple program input. - Equipped with a fixed vice that accommodates material lengths up to a maximum of 9999mm. - Standard features include a servo-controlled ball screw feeding vice (stroke 500mm). - Can store up to 100 patterns of process program input for different dimensions. - Achieves improved saw blade life through a reliable "lower saw slide cutting" method. - The material feeding vice protects the surface of the workpiece with a profile lifting system. - A wide cutting range allows for cutting various shapes. - Efficient semi-dry lubrication extends the life of the saw blade. ■Other Functions - Automatically stops when cutting is complete.

  • Plastic processing machines (cutting and rolling)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ACPW200D-20 | Column Turning Free Angle Double-Head Circular Saw Cutting Machine

ACPW200D-20 | Column Turning Free Angle Double-Head Circular Saw Cutting Machine

High-performance double-head cutting machine capable of cutting angles from 90 degrees to 50 degrees.

The ACPW200D is a double-head angle cutting machine equipped with an automatic length adjustment function for the moving head. Its high rigidity structure and high-precision positioning enable high-quality cutting processes for materials such as aluminum, resin, and wood. Main Features and Characteristics ◆ Basic Performance Supporting High-Precision Cutting - Electronic length adjustment of the X-axis controlled by a servo motor - Swiveling angle (manual swivel) left axis 0 to 50 degrees, right axis 0 to -50 degrees - Smooth cutting operation with air-hydraulic saw blade feed - Maximum cutting length: 2,000mm - Saw blade diameter: 405mm (carbide blade) × 2 pieces - Saw blade motor output: 2.2kW × 2 units ◆ Secure Fixing of Profiles - Standard equipment includes two upper clamps (with pressure relief valve).

  • Plastic processing machines (cutting and rolling)
  • Wood processing machinery
  • Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One machine for 90-degree and 45-degree cutting! Two-head cutting machine UCA2H90/45

One machine for 90-degree and 45-degree cutting! Two-head cutting machine UCA2H90/45

A space-saving multi-functional processing machine that balances cutting quality and work efficiency.

The quality required for cutting is becoming more advanced every day. Furthermore, with the reduction of workspace, there is a strong demand for compact machine dimensions. The UCA2H90/45 is a space-saving composite processing machine that handles two processes: perpendicular cutting of aluminum profiles and 45° inclined cutting, all in one unit. It combines years of expertise in cutting machines with the latest aluminum profile cutting technology, achieving high productivity and stable quality at a high level. Additionally, by employing upper clamps positioned on both sides of the blade and two horizontal clamps, it balances safety and workability. This machine will significantly contribute to future high-efficiency production.

  • ChatGPT Image 2025年8月8日 19_01_43.png
  • ChatGPT Image 2025年8月8日 18_55_16.png
  • Other machine tools
  • Plastic processing machines (cutting and rolling)
  • Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Cutting machine

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.