Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
241～255 item / All 946 items
Hydraulic Cylinder HC5S15 to HC25S100 Super Tool
Hydraulic Cylinder (Single Acting) HC5S15 to HC25S100 Super Tool ● It is a single acting type with a built-in spring, allowing for reciprocation with a single high-pressure hose. ● Designed to minimize the minimum height as much as possible.
New Product Catalog Available: A versatile hardware provider handling everything from housing equipment to facility equipment.
Shibutani's Industrial Equipment Division is an all-rounder in hardware, handling everything from residential equipment to industrial machinery. Through a consistent management system that covers design, manufacturing, testing, and logistics at our own factory, we can provide high-quality and reasonably priced products starting from just one unit. We also respond promptly to customizations, special orders, and small lot requests that other manufacturers cannot accommodate. We are currently offering a new product introduction catalog as a gift! Please check it out via PDF download. 【New Product Lineup】 ■ 'APC Cylinder' that can be configured with master key systems ■ 'Assist Handle' that allows doors to open and close with light force ■ 'Push Latch' with large buttons for easy operation ■ 'Sealing Handle' that enables strong sealing with rollers ■ 'Corner Handle' that allows door sealing through tightening *For more details, please refer to the PDF materials or feel free to contact us.
Presentation of the new product catalog: A versatile hardware provider handling everything from housing equipment to facility equipment.
Shibutani's Industrial Equipment Division is an all-rounder in hardware, handling everything from residential equipment to industrial machinery. With a consistent management system covering design, manufacturing, testing, and logistics at our own factory, we can provide high-quality and reasonably priced products starting from just one unit. We also respond promptly to customizations, special orders, and small lot requests that other manufacturers cannot accommodate. We are currently offering a new product introduction catalog as a gift! Please check it out via PDF download. 【New Product Lineup】 ■ 'Waterproof Compression Cylinder' that can be tightened with just the cylinder ■ 'One-Way Torque Hinge' with a structure that applies torque in one direction only ■ 'Torque Hinge (Click Type)' that closes the door tightly without bouncing back ■ 'Heavy-Duty Slide Rail' that can handle a load of up to 1765N (180kgf) ■ 'Heat-Resistant Push Latch' that excels in heat resistance and can be used at temperatures below 90℃ *For more details, please refer to the PDF materials or feel free to contact us.
Tightening is possible with just the cylinder! A cylinder lock that demonstrates excellent waterproof performance.
The "EL-320" is a waterproof cylinder lock that can be tightened using only the cylinder. The latch pulls the frame and door together, maintaining a sealed state. When locked, the latch moves 3.5mm, drawing the door towards the frame, and can only be inserted or removed in this pulled state. Additionally, by changing the latch, the locking position can be set freely in all directions: up, down, left, and right. You can choose from two colors: silver and black. If you require different keys, please consult us. 【Features】 ■ Can be tightened using only the cylinder ■ Excellent waterproof performance (IPX5) ■ Key is an easy-to-use reversible type ■ Nut can be removed while the latch is still attached ■ RoHS compliant product *For more details, please refer to the PDF document or feel free to contact us.
![[VA Case] Cylinder for Extruder](https://image.mono.ipros.com/public/product/image/189/2000495184/IPROS75806714774239540003.png?w=280&h=280)
Consistent processing in-house from cutting, external machining, to BTA processing! Achieving high straightness heat treatment with a barrel-type continuous furnace!
We would like to introduce the VA case of "Cylinders for Extruders" from Daiichi Heat Treatment Industry Co., Ltd. By using barrel furnace heat treatment, we can eliminate the processes of straightening and stress relief annealing, as well as the pre-drilling process. Additionally, we achieve cost reduction through integrated manufacturing from heat treatment to processing. 【Benefits】 ■ Heat Treatment - No bending, allowing for the omission of straightening and stress relief processes - Process changes due to deep hardening ■ External Turning - Reduction in horizontal transportation costs - Omission of management tasks - Shortened construction period through integrated management *For more details, please refer to the PDF materials or feel free to contact us.
To a trading company for manufacturing technology.
What trading companies are truly needed for the manufacturing industry... I want to develop a business that can overcome this transitional period while keeping this issue firmly in mind.
![[Example] I want a cylinder that is not a standard product!](https://image.mono.ipros.com/public/product/image/5b1/2000579985/IPROS65455256609372505167.png?w=280&h=280)
By thinking of creating what is needed on the manufacturing site, we can evolve the site!
We would like to introduce a case where there was a voice at the site saying, "If only the stroke of this cylinder were a little longer," and we took action to implement improvements. To extend the stroke of the cylinder without changing the mounting hole configuration, we decided to create a new design and handle everything from design to manufacturing. Our company uses 3D CAD, allowing us to independently design even products that require assembly. With the mindset of creating what the manufacturing site needs, we can evolve the workplace. 【Recommended for those who:】 ■ Are not satisfied with the functionality of standard products ■ Are worried that custom products will be extremely expensive *For more details, please refer to the related link page or feel free to contact us.
A BF cylinder with a JIS-compliant shape packed with the features of a BF diaphragm!
This is a BF cylinder with a JIS-compliant shape that incorporates the features of a BF diaphragm. It is possible to install an embedded sensor switch.
Achieving zero friction resistance. A new cylinder with air bearings that has no wear or dust generation has arrived.
The "Air Bearing Cylinder" is an air cylinder that employs air bearings in the rod guide section. Since there is no contact between the rod and the guide, there is no sliding resistance. This lack of resistance allows for soft-touch precision driving at micro-loads and low speeds. It can output to targeted values, making it suitable for applications that require precise load control, such as precision grinding machines. It is also compatible with clean room environments. 【Features】 ◆ By adopting air bearings (static pressure bearings) in the piston and rod guide sections, friction resistance is zero. ◆ The use of porous metal sintered air bearings achieves higher lateral rigidity compared to conventional products. ◆ Special adaptations are possible through free design. 【NEW】 ◆ Air Bearing Cylinder "Rotational Constraint Specification (Double Acting Type)" ◆ Air Bearing Cylinder "Copper Ion-Free Type" are also available for proposal.
Air bearing cylinder with zero friction resistance, achieving the industry's smallest and thinnest class.
The ultra-thin air bearing cylinder "ACS-13.5-5" from Fujikura Composite brings innovation to the precision machinery industry as one of the smallest and thinnest products in the industry. Achieving an astonishing thickness of just 35mm at the rod tip, it also offers a compact model with an outer diameter of 40mm. This groundbreaking size makes the "ACS-13.5-5" an optimal solution for space-saving, miniaturization, and lightweighting of equipment. Furthermore, it enables ultra-precise control with zero friction resistance. By adopting a non-contact structure with air bearings, it delivers outstanding performance even in environments where precise movement is required. With these features, the "ACS-13.5-5" excels in various fields that demand advanced precision control, such as semiconductor manufacturing equipment, medical devices, and precision measuring instruments. Despite its small size, it demonstrates high performance, simultaneously meeting the seemingly contradictory demands of miniaturization and high precision in equipment. Fujikura Composite contributes to the further development of the precision machinery industry through this innovative product. Ultra-compact and high-precision position control promotes the efficiency of manufacturing processes and enhances product performance, accelerating technological innovation across the entire industry.
Air cylinder with precise drive in low to high temperature range.
This is an air cylinder that can be precisely operated in low to high temperature ranges by using a diaphragm with a unique rubber formulation characteristic of rubber manufacturers. ▶ Suggestions for the base material can also be provided ▶ Optimal diaphragm shape design is possible ▶ Formulations that can be used from -60°C to 200°C are available = Achieves improved product lifespan due to high durability
It is a modern design that combines intuitive operability with a classic appearance.
The desk controller "DPF-1C" is a display-equipped controller that is ideal for installation on various height-adjustable desks. Features: - Intuitive operability - Modern design that combines a classic appearance - Display shows table height with the option to switch between inches and centimeters - System fault diagnosis possible through error code display - Display automatically turns off when not in use for energy-saving effect For more details, please download the catalog.
It has a bendable structure that allows for high flexibility in installation direction, fitting any desk.
The "DPA" controller for height-adjustable desks is a compact desk panel. The height adjustment buttons feature clear arrow markings. Its bendable structure allows for high flexibility in installation direction, making it suitable for any desk. For more details, please download the catalog.
It is a compact and sturdy electric cylinder, ideal for applications in harsh conditions such as industrial machinery.
The electric cylinder "LA12" is suitable for factory automation, AGVs, ventilation systems, agricultural machinery, and applications that require precise movements. For more details, please download the catalog.
It is a compact and powerful electric cylinder that can be installed on many devices.
The "LA30" is a versatile electric cylinder that can be used for industrial and system applications. It is also suitable for special specifications such as wheelchairs. We offer options such as built-in potentiometers necessary for servo operation and motors (S-motor) to enhance thrust. 【Features】 ○ Compact design ○ Can be mounted on various equipment ○ Usable for various industrial machines, agricultural machinery, and for controlling the angle of satellite broadcast receiving antennas 【Specifications】 ○ Maximum thrust: 6,000N ○ Maximum speed: 65mm/s ○ Drive voltage: 12/24VDC *For more details, please download the catalog.
