Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
91～120 item / All 1003 items
High-pressure clamp hydraulic equipment general-purpose hydraulic cylinder
It was developed at the strong request of operators using hydraulic cylinders in welding operations. It improves work efficiency and extends cylinder lifespan, thereby increasing cost efficiency. For more details, please contact us or refer to the catalog.
High-pressure clamp hydraulic equipment clamping cylinder
The strong coil spring allows for clamping, making it ideal for long-term clamping. By adopting a coil spring instead of the conventional disc spring, high-precision clamping force is achieved. For more details, please contact us or refer to the catalog.
Transporting super heavy objects with a hydraulic cylinder.
The hydraulic self-propelled system with a hydraulic cylinder measuring method safely and accurately transports ultra-heavy objects. It constantly controls the center of gravity balance with an automatic posture control system.
We achieved a challenging relocation with Enerpac's hydraulic self-propelled system and wire clamp.
The world's first LNG regasification facility is constructed from 90,000 m³ of cement and 30,000 tons of steel. The relocation required a solution for lifting and sliding the massive structure. With Enerpac's hydraulic self-propelled system and wire clamps (strand jacks), the challenging relocation was achieved. Enerpac successfully lifted the 3,000-ton massive structure and slid it over uneven ground. [Contents] ○ LNG facility in the Adriatic Sea For more details, please contact us or download the catalog.
We will introduce examples of hull assembly and hull transportation of British Navy missile destroyers.
The hull section of the British Navy's air defense destroyer is manufactured in five blocks, with the heaviest block weighing as much as 1,400 tons. Prior to the welding work on the hull construction blocks, a synchronized system controlled by Enerpac's digital technology lifts the blocks, measures their weight, and positions them accurately. This has improved work efficiency and quality. When unloading a new ship, efficiency and accuracy are extremely important. Enerpac has developed a special synchronized lifting system to reduce the total work time and number of workers needed to complete the job. This 12-point lifting system can be powered by hydraulic equipment, features an electronic variable speed control device, and allows for the connection of two additional synchronized units (12-point lifting system) for large-scale lifting operations. [Contents] - Hull assembly of British Navy missile destroyers - Hull transportation For more details, please contact us or download the catalog.
Technical document containing basic calculation examples related to hydraulic pressure.
"The Basics of Hydraulic Calculations" is a "technical document" from Enapak Corporation, which manufactures and sells hydraulic equipment for industrial use. This document includes examples of calculations for hydraulic cylinder output and the required oil volume for cylinders, as well as a table for SI unit conversions. [Contents] ■ Output ■ Required Oil Volume ■ Cylinder Speed ■ SI Unit Conversion Table For more details, please refer to the catalog or feel free to contact us.
Introducing the steps to build a work crank system matched to production jigs.
The "Clamp System Setup" introduces four steps to build a work clamp system that matches the production jig. Additionally, it includes the layout of the swing cylinder and work support that achieves savings in machining setup time and improves product quality, as well as information on "support force," "clamping force," "clamping points," and the "requirements for the hydraulic circuit" to ensure the proper operation of the swing cylinder and work support. [Contents] ■ Main Steps of Clamp System Setup ■ Layout of Swing Cylinder and Work Support ■ Support Force and Clamping Force ■ Clamping Points ■ Requirements for Hydraulic Circuit, etc. For more details, please refer to the catalog or feel free to contact us.
A quick reference table showing cylinder speed in mm/second assuming 100% efficiency.
The "Cylinder Speed Quick Reference Table" includes technical data on cylinder speed in mm/second (calculated value at 50Hz) assuming 100% efficiency. [Included Content] ■ RC Type ■ RCH Type ■ RRH Type ■ BRD Type ■ RR Type ■ NR Type For more details, please refer to the catalog or feel free to contact us.
A series of hydraulic cylinders for super-large lifts that have reached the Summit Edition.
The "Super Large Lift Hydraulic Cylinder Series" is a product specialized for jack-up operations. We offer a lineup including the "HCG Series Single Acting Cylinder," "HCR Series Double Acting Cylinder," and "HCL Series with Safety Lock Nut." This product, combined with Enerpac hydraulic pumps, creates a world-class hydraulic system that ensures the safe and reliable execution of very challenging jack-up tasks. 【Features】 ■ Hard coating treatment applied, strong against eccentric loads with high-frequency specifications ■ The exterior and interior of the cylinder are designed to withstand bad weather ■ Easy operation due to the low-friction structure of the safety lock nut ■ Bearing technology prevents wear of the entire cylinder and internal damage even under strong eccentric loads ■ Low wear ultra-high pressure hydraulic seal technology *For more details, please refer to the PDF materials or feel free to contact us.
Ultra-flat hydraulic cylinder series capable of a maximum eccentric load of 4%.
The Enapak Ultra Flat Hydraulic Cylinder Series offers two options: "Tilt Type (CUSP Series)" and "With Stop Ring (CULP Series)." These products feature an ultra-low profile and can handle a maximum eccentric load of 4%. Additionally, the nitro carburizing surface treatment enhances wear resistance and prevents corrosion. 【Features】 ■ CUSP Series - Tilt type - Plunger with an inclination function that accommodates 2 to 4° - The limit stroke can be visually confirmed by the red line on the plunger ■ CULP Series - With stop ring *For more details, please refer to the PDF document or feel free to contact us.
The return side is also controlled by hydraulic pressure! Coating specifications that can handle bad weather. The maximum operating pressure is 70 MPa.
The "HCRL Series" is a double-acting hydraulic cylinder that can maintain a load for an extended period due to its mechanical safety lock nut. It supports a maximum operating pressure of 70 MPa and allows for hydraulic control of both pushing and retracting. It can withstand eccentric loads of up to approximately 10% of the cylinder's maximum capacity. Designed for high-frequency use with hard coating treatment, the tilt saddle attached to the cylinder can accommodate inclinations of up to 5 degrees. 【Features】 ■ Maximum operating pressure of 70 MPa ■ Coating specifications for both internal and external surfaces to withstand bad weather ■ Equipped with an over-stroke prevention stop ring ■ Low-friction safety lock nut allows for quick tightening *For more details, please refer to the documentation. Feel free to contact us with any inquiries.
Easily, safely, and cost-effectively extract components attached to the shaft!
The "LGM Series" is a mechanical lock grip puller suitable for pulling small to medium-sized wheels, sprockets, bearings, and other similar shaft-mounted components. Thanks to the puller's self-centering closure system, all claws operate simultaneously, allowing a single operator to easily attach and use the puller. 【Features】 - Quick and easy setup and installation for a wide range of applications - Secure grip with locking claws for safe and simple operation - Synchronized claw movement enables a single operator to perform the entire pulling operation - Available in configurations with 2 or 3 claws - Convenient adjustment handle makes positioning the claws easy, improving work speed *For more details, please refer to the PDF document or feel free to contact us.
Equivalent safety and convenience to a mechanical puller! Designed to reduce operator fatigue.
The "LGH Series" is a hydraulic lock grip puller that provides the same level of safety and convenience as a mechanical puller by applying pulling force through a standard 70MPa hydraulic cylinder. It can exert a maximum thrust of 576kN, making it suitable for the extraction of large parts with a maximum diameter of 660mm attached to a shaft. In addition to the hydraulic puller, we also offer the "LGHMS Series" master puller set, which includes a cylinder, hose, pump, and more. 【Features of the LGH Series】 ■ Improved pulling capacity by applying hydraulic pulling force, reducing operator fatigue ■ Ability to choose between 2-jaw and 3-jaw configurations, regardless of the presence of a hollow cylinder ■ Locking mechanism prevents the puller's jaws from slipping off the workpiece ■ Prevents damage to the spindle when pulling against a flat surface ■ The upper part of the jaws opens wide, allowing use on thick objects *For more details, please refer to the PDF document or feel free to contact us.
![[Information] Regarding the Use of Swing Clamp Accessory Arm](https://image.mono.ipros.com/public/product/image/a08/2000657066/IPROS27091082281254170500.png?w=280&h=280)
Arm length of the CAL/CAS series: Clamping force: Graphs of maximum flow rate and other related information!
The swing clamp's maximum flow rate per clamp cylinder is determined by the length of the arm used, and the intersection of the arm length and curve represents the clamping force. When determining the clamping force, please adjust the arm length within the allowable clamping force and be careful not to damage the plunger rod during installation. This document includes graphs showing the relationship between arm length, clamping force, and maximum flow rate for the separately sold long arm "CAL series" and the separately sold standard arm "CAS series," as well as dimension diagrams for the mounting parts when fabricating the arm. Please take a look. [Contents] - Graph of arm length: clamping force: maximum flow rate relationship - Clamping arm dimension table - Dimension table for arm fabrication - Example of usage conditions for the 5kN series - Dimension diagram for mounting parts when fabricating the arm *For more details, please refer to the PDF document or feel free to contact us.
Achieving cutting-edge speed and precision! A synchronized lifting system that places pumps at each point.
The "EVOP Series" is a synchronized lifting system suitable for heavy-duty cylinders with capacities ranging from 3036 to 10644 kN. It is synchronized controlled by a variable frequency drive (VFD) motor, enabling smooth operation and high-precision high-speed lifting. Additionally, we offer products such as the "EVO-SC-25, stroke sensor cable, 25 meters," which can be connected to extend cables, and the "CLNC12 network controller." 【Features】 ■ The standard control interface allows for easy setup and a variety of lifting operations. ■ Lifting speed is eight times faster compared to similar methods. ■ The stroke difference between each cylinder during operation is less than 1.0 mm. ■ Built-in warnings and stop alarms ensure maximum safety. *For more details, please refer to the PDF materials or feel free to contact us.
Introducing a hydraulic coupler that can be used at temperatures of -40 to 100℃, with a maximum allowable flow rate of 6L/min and a maximum operating pressure of 30MPa.
We would like to introduce our "Automatic Couplers." The block-integrated models "AUC-115" and "AUN-115-PF1/4" are suitable for systems that automate the connection and disconnection of hydraulic piping, such as hydraulic cylinders. The screw-in models "L391234" and "L391235" feature external threads on the coupler body, making them easy to integrate and allowing for direct attachment to manifold blocks. The specifications and connection accuracy are the same as the block-integrated models. 【Features】 ■ Block-integrated type - Suitable for systems that automate the connection and disconnection of hydraulic piping, such as hydraulic cylinders. ■ Screw-in type - Features external threads on the coupler body, making integration easy and allowing for direct attachment to manifold blocks. *For more details, please refer to the PDF materials or feel free to contact us.
Withstand lateral loads up to 10% of capacity, reducing cylinder wear! Safe to use even in environments prone to rust.
The "RA Series" is a single-acting/double-acting aluminum cylinder that weighs about 50-60% less compared to steel cylinders, making it easy to transport and install. With bearings synthesized from new materials, a floating state is formed on the sliding surface of the cylinder, allowing it to withstand lateral loads of up to 10% of its capacity, while also reducing cylinder wear. Additionally, we offer the double-acting aluminum center hole cylinder (hydraulic return) "RARH Series," which is approximately 40% lighter than steel center hole cylinders. 【Features】 ■ Weighs about 50-60% less compared to steel cylinders ■ Easy to transport and install ■ Can withstand lateral loads of up to 10% of its capacity, while reducing cylinder wear ■ The main material, aluminum alloy steel, can be safely used even in environments prone to rust *For more details, please refer to the PDF document or feel free to contact us.
It is possible to effectively distribute eccentric loads! Prevents galling scratches on the inner surface of the cylinder and early bearing damage.
The "RC Series" is a single-acting cylinder (spring return) that incorporates a double bearing (GR2) structure into the RC DUO cylinder. The return mechanism of the cylinder uses a reinforced spring, achieving both powerful tension and remarkable durability. The capacities range from 45kN to 100kN, 142kN, 233kN, 293kN/500kN, and 718kN/933kN. 【Features】 ■ The hydraulic seal is surrounded by bearings at both ends, allowing for effective distribution of eccentric loads. ■ By reducing the burden on the hydraulic seal, the durability is significantly improved compared to conventional products. ■ Prevents galling on the inner surface of the cylinder and early bearing damage caused by eccentric and dynamic loads. *For more details, please refer to the PDF document or feel free to contact us.
ATEX certified! An ideal tool for removing stuck or corroded nuts.
The "NSH Series" is a hydraulic nut splitter designed to comply with BS/ANSI flange standards. The cutting depth of the nut can be adjusted using the blade positioning scale to prevent damage to the bolt. It features an ergonomic design and a user-friendly handle position. The nut splitter has been certified as compliant with the 94/9/EC "ATEX Declaration" based on test results. 【Features】 ■ Designed to comply with flange standards ■ An ideal tool for removing nuts ■ Adjustable cutting depth to prevent bolt damage ■ Cutting heads and power heads can be exchanged according to application ■ Ergonomic design and user-friendly handle position *For more details, please refer to the PDF materials or feel free to contact us.
ATEX certified, meeting the requirements for a compliant work environment! Suitable for use in tight scaffolding and work passages.
The "LAT Series" is a hydraulic pump that can be operated solely with air in harsh work environments that require explosion-proof performance. It has a mass that can be carried by one worker and a compact shape, making it suitable for use in narrow or cramped scaffolding, work passages, pipe racks, and lifts. Additionally, the hydraulic pump with a three-piston design achieves the highest level of tightening and loosening speed, allowing for cost reduction without delaying work. 【Features】 ■ ATEX certified, meeting work environment compliance requirements ■ Mass that can be carried by one worker and a compact shape ■ Standard roll cage to protect air equipment and the pump body ■ Pendant switch operable with air and equipped with a 4.5m cord ■ Comes with a certified 100mm calibrated gauge *For more details, please refer to the PDF document or feel free to contact us.
Equipped with the SyncHoist system! A case where the length of the rigging could be easily and accurately adjusted.
South Carolina Electric & Gas Company (SCE&G) is working on an expansion project for a nuclear power plant and was tasked with installing a 2.4 million pound CA01 module. The CA01 module is not only very large and heavy but also generally has an irregular shape, making it difficult to handle within the required tolerances, necessitating additional personnel, equipment, and time. In response, Enerpac provided the SyncHoist system, a lifting device under the hook consisting of multiple specialized hydraulic cylinders. This system allowed operators to monitor and adjust each lifting point individually or in sync together with precision. *For more details, please refer to the PDF document or feel free to contact us.*
Introducing examples using the RC series hydraulic cylinders and P series hydraulic hand pumps!
Vesuvius processes bricks used inside industrial furnaces. The bricks start in a "soft" state and need to be compressed, hardened, and heated before being placed in the furnace. They are packed into a steel box for compression, which solidifies the bricks; however, after compression, the bricks stick to the steel fixtures, requiring considerable force to remove. To address this, a 50-ton hydraulic cylinder and a manual hand pump are used. Pressure is applied to the release rod to detach the bricks from the steel fixtures. The hydraulic system provides a quick and safe solution. 【Case Summary】 ■Customer: Vesuvius (Poland) ■Products: RC series hydraulic cylinders, P series hydraulic hand pumps ■Result: Provided a quick and safe solution *For more details, please refer to the PDF document or feel free to contact us.
43,000-ton floating oil production system! Introducing a case where integrity was successfully maintained!
Maintaining structural integrity throughout the lift was essential not only for ensuring the safety of the lift but also for securing structural integrity and safety throughout its operational lifespan. To achieve this, we utilized Enerpac PLC-controlled 700 bar synchronized lifting technology to individually control 352 small high-pressure (700 bar) 300-ton hydraulic cylinders, which were integrated into the active skids under the steel structure in groups. We were able to detect and control deflection within the required range of 210 mm over a 70-meter span between the pontoon and the main superstructure, thereby protecting its integrity throughout the lifting, weighing, moving, and launching processes. [Case Overview] ■ Client: Marine and Heavy Industry in Malaysia (Johor Bahru) ■ Product: EVO Synchronized Lifting System *For more details, please refer to the PDF document or feel free to contact us.
We will introduce a case where we provided a hydraulic solution to pull out a pin within 15 minutes!
All boreholes of oil wells being drilled must be covered with durable materials to prevent contamination and provide structural support during drilling. The elevator spider is used as a guide to center each casing, and the pins need to be replaced with each drilling to remove corrosion and dirt that accumulates during the process. Additionally, the existing process for removing the pins at MOISS took up to four hours and required continuous hammering. The spindle bar passes through the center of the "RCH series" hollow cylinder attached to a metal sleeve and connects to the pins of the elevator spider. The "RCH series hollow plunger hydraulic cylinder" equipped with the "P series Ultima hydraulic hand pump" provides a hydraulic solution to pull out the pins in under 15 minutes, saving the maintenance team several hours. *For more details, please refer to the PDF document or feel free to contact us.*
The body and the plunger cylinder have a strong and corrosion-resistant soft nitriding finish!
To support the construction of the new Joint Support Ship (JSS), the team at Seaspan Shipyards, based in Vancouver, aimed to find more effective ways to keep the vessel level throughout the project. To move large and heavy objects effectively, safely, and accurately, precise control and synchronized movement of all lifting points are required. To achieve this, the "Enerpac EVO synchronized lifting pump" and 12 "high-capacity hydraulic lifting cylinders" were specified and supplied by the local Enerpac distributor, Hyseco. By using only one operator to control 12 lift points from a single intuitive interface, productivity and accuracy were improved, ultimately helping to maintain the structural integrity as the build progressed. *For more details, please refer to the PDF document or feel free to contact us.*
Horizontal bridge slide method! I was able to complete the slide in 52 minutes!
Minimizing the time that State Route 266 is closed was a primary objective during the reconstruction of the bridge over the Holbrook Canal. The new bridge was initially used as a detour while the defective bridge was being demolished, and once the old bridge was taken down, the new bridge needed to be slid into position at the original bridge's location. To slide the new bridge into the designated position, a lateral bridge sliding method was employed. We provided a hydraulic solution that could push the new 44.5-foot bridge structure into the designated position using the lateral sliding method with PTFE slide elements. We supplied two "RR series double-acting hydraulic cylinders," each equipped with a unique "ZU series hydraulic pump" and integrated pendant control. The pendant control allowed the operator to maintain individual control and manage any shifts in the bridge structure between the abutments or recover from wedging. *For more details, please refer to the PDF document or feel free to contact us.*
Each pier has two independently controlled hydraulic jacks that precisely lowered the caisson!
The existing Johnson Street Bridge, which has a 90-year history, is located in the heart of Victoria, British Columbia, and is in the process of being replaced with a new bridge that will serve the community for the next 100 years. The 1,100-ton bascule bridge box is composed of steel and concrete caissons and needed to be precisely lowered onto 16 large piers. Therefore, we provided 32 "CLSG high-tonnage hydraulic cylinders" and 3 "EVO synchronized lift systems." All three systems are networked, allowing one operator to control all 32 points from a master control user interface. By combining the system with the bar lowering method, the company improved precision, productivity, and efficiency, completing the lowering and leveling of the caissons in just three business days. *For more details, please refer to the PDF document or feel free to contact us.
Up to twice the flow rate compared to our conventional models! For die casting machines and various types of casting equipment.
FLATFACE CUPLA FF Type is a quick connect coupling for hydraulic piping, featuring a flat contact surface. Compared to our other 35 MPa hydraulic CUPLA, it delivers 1.5 to 2 times higher flow rate. Its unique valve structure minimizes spillage and air ingress during connection and disconnection. With a working pressure of 35 MPa, it is suitable for hydraulic piping with pressure fluctuations, such as those found in die casting machines. Features: - Easily connected simply by pushing the plug into the socket. - Separation prevention mechanism prevents accidental disconnection caused by vibration or impact during connection. - Available in various thread sizes (3/8", 1/2", 3/4", and 1") For more details, please refer to the PDF catalog or feel free to contact us.
Contributing to cost reduction and performance improvement! Easy replacement of parts in the mold station.
"MaxLyte" is an advanced magnetic cylinder product from Rotometrics that can achieve cost reduction and performance improvement. This lightweight magnetic cylinder is 40% lighter than standard magnetic cylinders available on the market. It is designed and manufactured to provide superior durability, resistance to bending, and heat resistance compared to typical lightweight magnetic cylinder products. With a global manufacturing system and product support, it ensures quick delivery and continuous uptime, providing solutions that add value to your press system. [Features] - Designed to enhance durability - Achieves over 40% weight reduction - Reduces transportation costs and lowers CO2 emissions during transport due to lightweight design - Global manufacturing: Eureka, Missouri, USA; Aldridge, UK; Huzhou, China - Can be improved to extend tool life - Lightweight magnetic design allows for safe and secure operation *For more details, please download the PDF or feel free to contact us.
Non-flick cylinder
It is used for mechanical elements that require low friction and low hysteresis (low mechanical loss) during reciprocating motion of the equipment. ● Low mechanical loss and small mechanical hysteresis. ● Capable of producing long strokes. ● Easy maintenance. ● Simple structure with no failures due to entrapment of materials like rubber, which is a defect of conventional products. ● The sliding part of the cylinder is lubricated by a micro-leakage air film, resulting in low sliding resistance and minimal wear. ● Operates at low pressure. ● Long lifespan. The movable cylinder part is made of CFRP (carbon fiber reinforced pipe), making it lightweight.
