We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Dryer.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Dryer Product List and Ranking from 371 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Jul 22, 2026～Aug 18, 2026
This ranking is based on the number of page views on our site.

Dryer Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Jul 22, 2026～Aug 18, 2026
This ranking is based on the number of page views on our site.

  1. クメタ製作所 本社／工場 Shizuoka//Food Machinery
  2. アメロイド Kanagawa//Industrial Machinery
  3. アドバンテック東洋 Tokyo//Testing, Analysis and Measurement
  4. 4 テッケン興産 本社 Tokyo//Building materials, supplies and fixtures
  5. 5 null/null
Go to Company Ranking

Dryer Product ranking

Last Updated： Aggregation Period:Jul 22, 2026～Aug 18, 2026
This ranking is based on the number of page views on our site.

  1. A wide variety of dryers are all available from one company [Drying tests in progress]. クメタ製作所 本社／工場
  2. Reduce the volume of plating wastewater sludge | Cut industrial waste costs by one-third with a dry separator. アメロイド
  3. Low-temperature and low-cost! Organic waste dryer "Redox Master" テッケン興産 本社
  4. 4 Custom-made food drying equipment for seafood, wakame, vegetables, tea, and more.
  5. 5 Constant Temperature Dryer DRN/DRA Series アドバンテック東洋

Dryer Product List

961～990 item / All 1141 items

Displayed results
Tunnel-type dryer "APT-5060"

Tunnel-type dryer "APT-5060"

Asahi's unique hot air pathway! Options such as rear door cold air damper and eco mode are also available.

We would like to introduce our tunnel-type dryer, the 'APT-5060'. Hot air attacks the items directly from the front and rear ducts, rather than through punching holes. The thermal energy is transmitted to the items without being obstructed by the rotating drum, resulting in efficient energy use and faster drying. Additionally, the adoption of a hollow shaft drive motor eliminates the need for chains, freeing you from the hassle of adjustments, lubrication, and replacements due to wear. 【Features】 ■ Direct axial flow method ■ Long-life heater ■ Heater screen ■ Machine insulation ■ Hollow shaft drive motor *For more details, please refer to the PDF document or feel free to contact us.

  • Drying Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tunnel-type dryer "APT-5100B/5120B"

Tunnel-type dryer "APT-5100B/5120B"

Direct axial blow method! It dries quickly and efficiently because there is no waste, saving energy.

We would like to introduce our tunnel-type dryer, the 'APT-5100B/5120B'. Thanks to its special door structure, it allows for both input and output from the same side. This enables a space-saving installation equivalent to one conveyor, while the side without the conveyor becomes a safe maintenance area. Additionally, we have revised the airflow and changed the structure to allow lint to adhere to the underside of the filter, making it less likely for lint blockages to cause a decrease in airflow. 【Features】 ■ Enlarged lint filter ■ Direct axial blow method ■ Space-saving HT type *For more details, please refer to the PDF materials or feel free to contact us.

  • Drying Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fully Automatic Balance-Type High-Speed Centrifugal Dryer 'D500X'

Fully Automatic Balance-Type High-Speed Centrifugal Dryer 'D500X'

Eliminate IPA from the drying process! Fully automatic balance-type high-speed centrifugal dryer capable of operation at low cost.

The "D500X" is a high-speed centrifugal dryer that complies with REACH regulations and does not fall under the Fire Service Act, making it a safe option for the environment and human health. It is equipped with a mechanism that automatically adjusts for unbalanced workpiece weight (automatic centering mechanism), allowing for stable high-speed rotation. Additionally, it has two intake fans that forcibly suck in scattered liquids and vapors, preventing re-adhesion and efficiently drying the workpieces. 【Features】 ■ Processing capacity: 2.5 times that of IPA drying ■ Cost: 1/2 of IPA drying ■ No introduction or management costs for IPA, enabling low-cost operation ■ Achieves stable high-speed rotation ■ Forcibly sucks in scattered liquids and vapors, preventing re-adhesion and efficiently drying the workpieces *For more details, please refer to the PDF materials or feel free to contact us.

  • centrifuge
  • Drying Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CO2 reduction carbon-neutral drying device

CO2 reduction carbon-neutral drying device

A one-stop service that covers everything from the design to construction and maintenance of painting plants.

Our "TG System" is a one-stop service that handles everything from the design and construction to maintenance of painting equipment. We offer the highly regarded CO2-reducing carbon-neutral drying equipment. We cater to all types of painting equipment, air supply and exhaust systems, heating and humidifying devices, LED lighting, and control of various equipment. Feel free to leave proposals for tax incentives and other matters to us. We handle the highly regarded CO2-reducing carbon-neutral drying equipment and have a fully equipped painting line for tours and lab tests, so we can provide actual demonstrations. Please feel free to consult us if you have any requests. 【Features】CO2-reducing carbon-neutral drying equipment ■ CO2 reduction ■ VOC reduction ■ Odor reduction ■ Tar adhesion reduction ■ Flat furnace *For more details, please feel free to contact us.

  • Other contract services
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Decompression dryer with ozone sterilization function "TA2600 model"

Decompression dryer with ozone sterilization function "TA2600 model"

From crispy dry to semi-dry! A new deliciousness for vegetables and fruits!

The "TA2600 model" is a device that sterilizes and dries raw materials such as vegetables and fruits to create crispy vegetable chips and moist-textured dried fruits. By preserving the nutritional value and deliciousness of each ingredient while making them suitable for long-term storage, it allows for the efficient use of vegetables and fruits harvested by production farmers. It can be utilized in various fields, including emergency food storage, promotion of the sixth industrial sector, and development of local specialty products. 【Features】 - Efficient drying without waste, maintaining deliciousness - Hygienic consideration with ozone sterilization (patent obtained) - Capability to accumulate and store drying data - Easy operation of sterilization and drying via a touch panel *For more details, please refer to the PDF materials or feel free to contact us.

  • Food Processing Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rotary drum chip dryer CD

Rotary drum chip dryer CD

Real-time processing can be implemented into the supply line.

The "CD" is a rotating drum-type chip dryer. It uses a first-in, first-out method, discharging the dried chips in order. Since it allows for precise discharge, it is ideal as a fuel supply device for small chip boilers. You can utilize heat from biomass boilers or factory waste heat as the drying heat source. We recommend its introduction to small-scale CHP, small boilers, and pellet production lines. *For more details, please refer to the PDF materials or feel free to contact us.

  • Wood processing machinery
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Belt-type chip dryer BD

Belt-type chip dryer BD

Ideal chip dryer for small biomass boilers.

The "BD" is a belt-type chip dryer. It operates on a first-in, first-out basis, discharging dried chips in order. Since it allows for precise discharge, it is ideal as a fuel supply device for small chip boilers. You can utilize heat from biomass boilers or factory waste heat as a drying heat source. We recommend its introduction to small-scale CHP, small boilers, and pellet production lines. *For more details, please refer to the PDF materials or feel free to contact us.

  • Wood processing machinery
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vacuum drying device

Vacuum drying device

The work placement table inside the drying oven is specially designed! The front door opens to one side, providing a wide opening that makes it easy to load and unload parts.

We would like to introduce our "Vacuum Drying Device." This device features a vacuum chamber made of SUS304 with a diameter of φ600 and a depth of D585, equipped with three special sheath heaters to heat the interior of the chamber. It performs vacuum drying in an oil-free state. The front door of the vacuum chamber opens to one side, providing a wide opening for easy loading and unloading of parts. Additionally, the work placement table inside the drying furnace is custom-designed to meet customer specifications. 【Main Specifications】 ■ Drying Material: General Parts ■ Chamber Size: φ600×D585 ■ Chamber Capacity: Approximately 142L ■ External Dimensions: 850W×1049D×1800H *For more details, please refer to the PDF document or feel free to contact us.

  • Drying Equipment
  • Vacuum Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Yutaka Drying Device

Yutaka Drying Device

No watermark generation! A device that dries using the principle of surface tension with slow lifting.

We would like to introduce the "Yutaka Drying Device" that we handle. The device dries 25 sheets of Wf in a cassette using the principle of surface tension and slow lifting. By controlling the lifter and liquid level, it ensures that there is no liquid residue when the Wf and liquid level separate, preventing the occurrence of watermarks. The pass line will be designed to match the cleaning line, so please feel free to contact us when you need it. 【Main Specifications】 ■ Item to be cleaned: 200mm thickness 0.75t ■ Treatment method: Dip treatment using a cassette ■ Processing speed: 5 min (variable) ■ Cleanliness inside the device: 0.1μm Class 1 ■ Pass line: Designed to match the cleaning line *For more details, please refer to the PDF document or feel free to contact us.

  • Drying Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Unused Heat Eco Hybrid Dryer

Unused Heat Eco Hybrid Dryer

Thermal biomass energy hybrid system that makes unused heat renewable.

We offer an eco-hybrid dryer that utilizes unused heat in conjunction with currently used fuels such as kerosene and heavy oil, allowing for a reduction in fuel costs. This system effectively utilizes the heat generated during the production of charcoal in a carbonization device by secondary combustion, integrating the unused heat into the dryer, which can reduce combustion costs by over 30% compared to conventional dryers. Additionally, it operates with high efficiency through automatic control using temperature sensors. 【Features】 ■ Cost reduction ■ Environmentally friendly ■ Safe and high-efficiency operation *For more details, please download the PDF or feel free to contact us.

  • Drying Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Innergy Japan Co., Ltd. Company Profile

Innergy Japan Co., Ltd. Company Profile

Giving value to energy! Selected as a supplier by major Japanese companies.

Innergy Japan Co., Ltd. is an international plant supplier with many years of experience specializing in the energy and industrial sectors. We develop projects worldwide that integrate thermal and electrical solutions, covering various levels and stages. Additionally, we comply with strict ISO quality standards in various areas, including boilers and heaters, heat exchangers, and heat recovery systems. 【Business Lines】 ■ Biomass ■ Waste ■ Industry *For more details, please download the PDF or feel free to contact us.

  • Other energy equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hot Air Dryer "DR-1200 Model"

Hot Air Dryer "DR-1200 Model"

Introduction to the pellet manufacturing solution! It incorporates various ideas.

We would like to introduce our hot air dryer model 'DR-1200'. Various ideas have been incorporated to address the issue of temperature unevenness (especially the temperature difference between the upper and lower parts), which was a drawback of conventional box-type dryers. Additionally, the design takes cleanliness into consideration. 【Features】 ■ Addresses temperature unevenness ■ Designed with cleanliness in mind *For more details, please refer to the PDF document or feel free to contact us.

  • Food Processing Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Automatic Finger Disinfection Dryer "Super Clear Lady CL-1919"

Automatic Finger Disinfection Dryer "Super Clear Lady CL-1919"

Ideal for hand washing, disinfection, and drying. Quickly dries with far-infrared radiation heat.

The "Super Clear Lady CL-1919" is an automatic sterilizing dryer specifically for hands that eliminates and inactivates 99.9% of pathogens and viruses through the dual effects of UV-C irradiation and far-infrared radiation. Air taken in from outside the device passes through a special ceramic heater (200°C), and then sterilized far-infrared radiation heat at a perceived temperature of 40°C is sprayed to dry the hands. The far-infrared rays improve blood circulation and can also help prevent dry skin. Additionally, this product can be used in various environments such as medical institutions, welfare facilities, kindergartens, daycare centers, food service centers, hotels, highway service areas, and food processing factories. 【Features】 ■ Simultaneous sterilization and drying ■ "Continuous sterilization" and "sterilizing warm air emission" ■ "Instant operation" and "end confirmation with sound" *For more details, please download the PDF or feel free to contact us.

  • Drying Equipment
  • Other safety and hygiene products
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Low-temperature and low-cost! Organic waste dryer "Redox Master"

Low-temperature and low-cost! Organic waste dryer "Redox Master"

Minimize waste with low running costs without using high heat. The processed material can be reused as feed or fertilizer.

The "Redox Master" is a large dryer that promotes drying using plasma ions without the use of high heat. It dries at low temperatures of 30 to 70°C, allowing for the reuse of dried materials as fertilizers or animal feed without damaging them. By drying and effectively utilizing waste containing moisture, such as food residues, beverage residues, and sludge, it significantly reduces processing costs and contributes to a sustainable society. 【Features】 ■ Low running costs (estimated example: about 1/3 to 1/20 if the dried products can be sold) ■ CO2 reduction (estimated example: approximately 40% to 70% reduction in emissions) ■ Drying time (from a few hours to 1 day) * Processing capacity and drying time vary depending on the moisture content, viscosity, bulk density, etc., of the material being dried. ★ Please contact us if you wish to request a trial drying (for a fee). ★ For more details, please download the PDF or feel free to contact us.

  • スクリーンショット 2025-03-28 100002.png
  • スクリーンショット 2025-03-28 100023.png
  • スクリーンショット 2025-03-28 100036.png
  • スクリーンショット 2025-03-28 100046.png
  • スクリーンショット 2025-03-28 100057.png
  • スクリーンショット 2025-03-28 100109.png
  • スクリーンショット 2025-03-28 100315.png
  • スクリーンショット 2025-03-28 100123.png
  • Drying Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Water Treatment Case] Four processes (solid-liquid separation, concentration, dewatering, drying) in one machine!

[Water Treatment Case] Four processes (solid-liquid separation, concentration, dewatering, drying) in one machine!

We will introduce an example of consolidating into a single machine, achieving a reduction in installation costs and running costs!

We would like to introduce a case study from Ryuki Engineering, which proposes a reduction in the running costs of water treatment. We received a request from a metal processing factory to efficiently recover rare metals from high-concentration rare metal-containing water (valuable material) without lowering the concentration. [Case Study] ■Industry: Metal Processing Factory ■Challenges - Previously, recovery involved four processes (solid-liquid separation, concentration, dewatering, drying), which incurred significant time and costs. - There was a desire to efficiently recover only rare metals from high-concentration rare metal-containing water (valuable material) without lowering the concentration. Our company has consolidated the process into a single machine for de-drying. This one unit handles all roles, significantly reducing installation costs, installation space, and running costs (electricity and maintenance expenses). *For more details, please refer to the PDF document or feel free to contact us.

  • Water treatment equipment
  • others
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Water Treatment Case] Removal of Impurities from Cooling Water in Heat Exchangers

[Water Treatment Case] Removal of Impurities from Cooling Water in Heat Exchangers

90% OFF on water utility fees! Here are examples of reducing maintenance frequency and lowering disposal costs.

We would like to introduce a case study from Ryuki Engineering, which proposes a reduction in the running costs of water treatment. We received a request from a resin factory to reduce maintenance costs caused by impurities entering the heat exchanger from the cooling water used during cutting. 【Case Study】 ■Industry: Resin Factory ■Challenges - The large amount of cooling water used to cool the water during cutting contains impurities (resin scraps) that are entering the heat exchanger. - Maintenance costs for the heat exchanger are high, and we want to reduce them. We proposed dehydration to remove impurities from the cooling water. By using the cleaned cooling water in the heat exchanger, we reduced the maintenance frequency from four times a year to once a year. Additionally, we not only removed impurities but also reduced their volume to lower disposal costs. *For more details, please refer to the PDF document or feel free to contact us.

  • Water treatment equipment
  • others
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Card Series Polymer Dehumidifying Dryers for the Automotive Industry

Card Series Polymer Dehumidifying Dryers for the Automotive Industry

Reduce maintenance costs and contribute to the improvement of automotive parts quality!

In the automotive industry, the quality of resin components significantly affects the reliability of products. In particular, material degradation due to moisture absorption can lead to a decrease in component strength and appearance defects, potentially resulting in quality issues. Wittmann's polymer dehumidifying dryers, the Card series, contribute to improving the quality of automotive parts by reducing the running costs of material drying and providing stable drying performance. 【Application Scenarios】 - Automotive interior components - Exterior components - Engine compartment internal components - Electrical components 【Effects of Implementation】 - Suppression of quality degradation due to moisture absorption - Reduction of defective product occurrence - Improvement of product reliability - Cost reduction

  • Drying Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dehumidifying Dryer for Polymer for Medical Devices - Card Series

Dehumidifying Dryer for Polymer for Medical Devices - Card Series

Reduce material drying costs in precision molding of medical devices, bringing maintenance costs close to zero!

In the precision molding of the medical device industry, proper drying of materials is essential for the stable production of high-quality products. Particularly when using moisture-absorbing polymer materials, insufficient drying can lead to molding defects and a decline in product quality. Our dehumidifying dryer card series for polymers is a state-of-the-art dehumidifying dryer with proven results in Europe and the United States, capable of reducing material drying costs, including maintenance. It utilizes compressed air to achieve stable drying, with the energy required for drying provided solely by a heater. Furthermore, it features a low-cost design that does not use consumables like adsorbents. 【Application Scenarios】 - Precision molding of medical device components - Drying of moisture-absorbing polymer materials - Reduction of molding defects 【Benefits of Implementation】 - Reduction of material drying costs - Improvement in the quality of molded products - Establishment of a stable production system

  • Drying Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dehumidifying Dryer for Polymer - CARD Series for Home Appliance Manufacturers

Dehumidifying Dryer for Polymer - CARD Series for Home Appliance Manufacturers

Aiming for zero maintenance costs, reducing material drying costs!

In the home appliance industry, product quality and cost performance are crucial. Particularly in the molding of plastic parts, proper drying of materials significantly affects quality and is essential to suppress the occurrence of defective products. The cost of material drying impacts the overall manufacturing costs. Wittmann's CARD series dehumidifying dryers for polymers can reduce material drying costs, including maintenance, thereby contributing to cost reduction for home appliance manufacturers. [Usage Scenarios] * Molding of plastic parts * Reduction of material drying costs * Quality improvement [Effects of Implementation] * Reduction of maintenance costs * Suppression of defective product occurrence * Reduction of running costs

  • Drying Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aerospace Polymer Dehumidifying Dryer Card Series

Aerospace Polymer Dehumidifying Dryer Card Series

Reduce material drying costs and contribute to lightweighting in the aerospace field!

In the aerospace industry, weight reduction is a critical issue, and quality control of materials is essential. In particular, the drying of polymer materials significantly affects the strength and durability of products. Improper drying can lead to performance degradation of materials and manufacturing defects. The Wittmann CARD series dehumidifying dryers for polymers are the latest dehumidifying dryers that are a big hit in Europe and the United States, capable of reducing material drying costs, including maintenance. Utilizing compressed air, the CARD series achieves stable drying, with the energy required for drying coming solely from the heater. Additionally, it features a low-cost design that does not use consumables like adsorbents. 【Application Scenes】 - Aircraft parts - Spacecraft parts - Drone parts 【Benefits of Implementation】 - Reduction of material drying costs - Improvement of product quality - Achievement of weight reduction

  • Drying Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Toy-Grade Polymer Dehumidifying Dryer Card Series

Toy-Grade Polymer Dehumidifying Dryer Card Series

Reduce maintenance costs and support safe toy manufacturing!

In the toy industry, product safety is the top priority. Especially for toys that children may put in their mouths, quality control of materials is essential. Moisture contained in materials can lead to molding defects and reduced product strength, potentially compromising safety. Wittmann's polymer dehumidifying dryers from the Card series help reduce material drying costs, including maintenance, and support the safe manufacturing of toys. 【Usage Scenarios】 - Drying resin materials at toy manufacturers - Material management to meet safety standards - Reduction of molding defects 【Benefits of Implementation】 - Improved product safety through enhanced material quality - Cost reduction due to decreased molding defects - Reduced running costs due to maintenance-free operation

  • Drying Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dehumidifying Dryer for Polymer - Card Series for Infrastructure

Dehumidifying Dryer for Polymer - Card Series for Infrastructure

Reduce maintenance costs and contribute to the longevity of infrastructure!

In the infrastructure industry, it is important to prevent the deterioration of polymer materials and to extend the lifespan of structures. In particular, polymer materials used in harsh environments can deteriorate more quickly due to moisture absorption, which may reduce their durability. To address this issue, proper material drying is essential for ensuring the long-term reliability of infrastructure structures. Wittmann's polymer dehumidifying dryers, the Card series, contribute to extending the lifespan of infrastructure structures by reducing material drying costs, including maintenance. 【Application Scenarios】 - Infrastructure structures such as bridges, tunnels, and roads - Improved durability through polymer material drying - Reduction of long-term maintenance costs 【Effects of Implementation】 - Extension of structure lifespan by suppressing material deterioration - Extension of maintenance cycles - Reduction of total costs

  • Drying Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CARD Series Dehumidifying Dryers for Polymer Container Manufacturing

CARD Series Dehumidifying Dryers for Polymer Container Manufacturing

Reduce maintenance costs and lower drying costs for various resin materials!

In the container manufacturing industry, there is a demand to use various resin materials while balancing product quality and production efficiency. Quality degradation and molding defects due to moisture absorption in materials are significant challenges that lead to increased costs. Wittmann's CARD series achieves stable drying of diverse resin materials through a simple drying method that utilizes compressed air. With a maintenance-free design and a three-year warranty, it significantly reduces running costs and contributes to increased productivity. 【Usage Scenarios】 - Manufacturing various types of containers - Reducing molding defects - Reducing material costs 【Effects of Implementation】 - Reduction in material drying costs - Decrease in molding defect rates - Compatibility with diverse resin materials

  • Drying Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dehumidifying Dryer for Fibers - Card Series

Dehumidifying Dryer for Fibers - Card Series

Reduce maintenance costs and support the improvement of functional fiber quality!

In the fiber industry, maintaining the quality of materials is crucial in the production of functional fibers. Particularly when imparting functionalities such as moisture absorption and heat resistance, the moisture content of the materials significantly affects the performance of the products. Inadequate drying can lead to a decline in fiber performance and issues in the manufacturing process. Our polymer dehumidifying dryer Card series helps reduce material drying costs, including maintenance, and contributes to the improvement of functional fiber quality. 【Usage Scenarios】 - Production of functional fibers - Imparting functionalities such as moisture absorption and heat resistance - Quality control of materials 【Benefits of Implementation】 - Reduction in material drying costs - Improvement in product quality - Realization of a stable manufacturing process

  • Drying Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dehumidifying Dryer for Agriculture - Polymer Card Series

Dehumidifying Dryer for Agriculture - Polymer Card Series

Reduce maintenance costs and cut down on the running costs of material drying!

In the agricultural sector, maintaining product quality and reducing costs are essential. In particular, material degradation due to moisture can lead to a decline in product quality and a decrease in yield. Wittmann's polymer dehumidifying dryers, the Card series, reduce material drying costs, including maintenance, and achieve stable drying. 【Usage Scenarios】 - Manufacturing of agricultural materials - Storage of seeds and fertilizers - Production of plastic molded products 【Benefits of Implementation】 - Improvement in material quality - Enhancement of yield - Reduction in running costs

  • Drying Equipment
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hopper-sized dehumidifying dryer for medical devices

Hopper-sized dehumidifying dryer for medical devices

Directly mounted on the molding machine! A dehumidifying dryer ideal for small injection molding machines.

In the precision molding of the medical device industry, the quality of materials affects the accuracy and safety of the products. Particularly when using hygroscopic materials, drying the materials is crucial. Improper drying can lead to molding defects and deterioration of product performance. Wittmann's card series is a small dehumidifying dryer in hopper size that can be directly mounted on molding machines. Utilizing compressed air, it achieves stable drying and stabilizes material drying. 【Application Scenarios】 - Molding of precision medical components - Drying of hygroscopic materials - Material drying for small molding machines 【Benefits of Implementation】 - Reduction in material drying costs - Decrease in molding defects - Improvement in product quality

  • Engineering Plastics
  • Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Dryer

IPROS Services
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.