Fittings Product List and Ranking from 394 Manufacturers, Suppliers and Companies

Piping maintenance-related products product documentation

Not limited to products centered around piping fittings, we offer a lineup of related products and components!

This document features products from Nakaya Manufacturing Co., Ltd., which manufactures and sells maintenance service-related products for air conditioning and refrigeration equipment, gas, and heat exchangers. Included are various air conditioning-related components such as flare nuts, charging port fittings, copper pipes, and various types of fittings, as well as Act flame-retardant tubes. [Featured Products] - Flare Nuts - Flare Seal Nuts - Irregular Flare Nuts - Flare Unions - Flare Elbows, etc. *For more details, please download the PDF or feel free to contact us.

Company：中谷製作所
Price：Other

Piping Materials
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Static electricity prevention hose "Crystal Hose Static W Type"

For the transportation of powders, granules, and plastic pellets! It demonstrates excellent antistatic effects.

The "Crystal Horse Static Electricity Prevention Type W" is a static electricity prevention hose with a soft, transparent section that allows for checking the contents. By using PVC with anti-static additives, it has excellent static electricity prevention effects. It is suitable for transporting powders, granules, and plastic pellets. 【Features】 ■ Excellent static electricity prevention effects due to the use of PVC with anti-static additives ■ The soft section is transparent, allowing for checking the contents *For more details, please refer to the PDF document or feel free to contact us.

Company：タイガースポリマー
Price：Other

hose
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hose Tube "BM (Biomass) Series"

Resource circulation of biomass materials! By using biological materials as part of the raw materials, we reduce the amount of petroleum resources used.

At Tigers Polymer, in response to the growing environmental awareness, we have developed products that use bio-based resources (biomass) as part of the raw materials, aiming for resource conservation and CO2 emission reduction. The biomass content is 10% for the "Taiduct Hose GL-BM type" and 45% for the "Medil Tube V580C-BM." Please feel free to contact us for inquiries. 【Features】 <Taiduct Hose GL-BM type> ■ Partially made with bio-based materials ■ Biomass content (percentage of biomass materials in product weight) is 10% <Medil Tube V580C-BM> ■ Partially made with bio-based materials ■ Biomass content (percentage of biomass materials in product weight) is 45% ■ Composed of soft PVC, it has properties equivalent to the Medil Tube V580C and high transparency. *For more details, please refer to the PDF document or feel free to contact us.

Company：タイガースポリマー
Price：Other

hose
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Screw-in steel pipe fitting "Pipe Nipple"

We provide pipe nipples in sizes tailored to our customers' needs!

We mainly handle threaded steel pipe fittings called "pipe nipples," which are used for general piping applications such as water, oil, steam, air, and gas. These fittings can be widely used as joints for general piping, and the overall length (L dimension) can be provided in sizes tailored to customer needs. Please feel free to contact us for more information. 【Application Range】 ■ Fluids - Water - Oil - Steam - Air - Gas *For more details, please download the PDF or feel free to contact us.

Company：中西可鍛鋳鉄所
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fitting: Resin-coated threaded ductile cast iron pipe fitting

A joint with durability and corrosion resistance that can be used under harsh conditions.

The "resin-coated screw-type ductile cast iron pipe fittings" are fittings that have epoxy resin applied to their inner and outer surfaces through electrostatic coating and then baked on. They possess excellent corrosion resistance and also have durability that allows them to be used under harsh conditions. 【Application Range】 ■ Fluids: Excluding those for upward and downward use, using screw-type ductile cast iron pipe fittings. ■ Temperature: Below 40°C ■ Pressure: Below 2.0 MPa (20.4 kgf/cm²) ■ Pipe Types: - Rigid PVC-lined steel pipes for water supply (JWWA K 116) - Polyethylene powder-lined steel pipes for water supply (JWWA K 132) *For more details, please contact us.

Company：中西可鍛鋳鉄所
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

EO-2 Comprehensive Catalog (Leak-Free Comprehensive Catalog)

We are introducing a new generation of fittings using soft seals and bite rings!

This catalog is a comprehensive catalog for the steel pipe fittings 'EO-2' handled by Kaito Industries. It includes features of EO-2, a leak-free complete manual, function nuts, the EO-PSR series, and tube selection criteria. The "EO-2 series" is a new generation fitting that uses soft seals and biting rings. Since the nut and ring are integrated, it reduces the number of parts and makes management easier. [Contents] ■ EO-2 (steel pipe fittings) ■ Leak-free complete manual ■ Function nuts ■ Leak-free connection of ports and pipes ■ About EO-2 models *For more details, please refer to the PDF materials or feel free to contact us.

Company：海渡産業
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Prefabricated piping system

We have developed a system that incorporates grooved joints to reduce on-site welding to almost zero!

The "Prefabricated Piping System" allows for easy and quick assembly of piping components in the order specified in the piping construction drawings. Furthermore, it contributes significantly to labor-saving in piping work and shortening of construction periods, responding to the demands of the times, especially in building construction projects. 【Metal Pipe Prefabrication】 <Advantages of Prefabricated Piping> ■ Shortens construction periods with timely delivery according to construction process management ■ Reduces on-site processing, addressing labor shortages in the construction industry ■ Ensures uniformity and improvement in construction quality ■ Reduces material waste and labor costs, leading to cost savings ■ Improves the work environment and ensures safety by decreasing transportation work, noise, and waste generation *For more details, please refer to the PDF document or feel free to contact us.

Company：日本継手東京営業部
Price：Other

Piping Materials
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

JFE Polybutene Pipe Comprehensive Catalog

Features and various dimensions of easy-to-install and economical polybutene pipes are published!

This catalog features "polybutene pipes" handled by JFE fittings. In addition to expanding demand in the water supply sector as piping materials, performance evaluations have been conducted in accordance with Fire Prevention Notification No. 33, and they are also applicable for sprinkler piping in fire protection systems. Other products such as "H-type fittings" and "J One Quick 2" are also introduced. [Contents] ■ Polybutene pipes ■ H-type fittings ■ E-type fittings ■ J One Quick 2 (JOQ2) ■ Accessory materials ■ Piping design ■ Prohibited items and precautions *For more details, please refer to the PDF materials or feel free to contact us.

Company：日本継手東京営業部
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cost reduction by eliminating post-processing: Introduction of JFE's special high-strength cast iron fittings.

Contributes to weight reduction, shortened delivery times, and reduced processing costs with special cast iron that does not require heat treatment.

In the case of spheroidal graphite cast iron materials equivalent to FCD800 and FCD900, it is generally common to apply heat treatment to FCD450 material for quality stabilization, and then finish it to FCD800 or FCD900. Our H-FCD has achieved stable mass production of FCD800 and FCD900 without heat treatment, thanks to our unique chemical composition management and manufacturing know-how.

Company：日本継手東京営業部
Price：Other

Brake parts
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-strength FCD thin-walled, 8% lighter than steel.

Achieve weight reduction and shortened lead time! Please consider this as material for VE VA proposals.

The process for conventional materials (SCM or FCD450) was primary processing → heat treatment → heat treatment → grinding processing. The process for the new material (cast high-strength cast iron 800) is casting → final finishing. This achieves weight reduction and shorter lead times, allowing for an 8% weight reduction compared to steel with the same shape. Please consider this material as a VE VA proposal. 【Features】 ■ Process for the new material (cast high-strength cast iron 800) - Casting → final finishing ■ Achieves weight reduction and shorter lead times ■ Allows for an 8% weight reduction compared to steel with the same shape *For more details, please refer to the PDF document or feel free to contact us.

Company：日本継手東京営業部
Price：Other

Contract manufacturing
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FCD engineering reduction high strength machinability

Supports a wide range of grades! The introduction of 3D printers has also made a fast and cost-effective prototyping system possible!

Our company has over 80 years of experience in cast fittings for water pipes. We cater to a wide range of grades, from the conventional FCD450 to FCD1200. Leveraging this expertise, we have developed new technology H-FC to meet the needs of various fields and solve your concerns with various benefits. Additionally, the introduction of 3D printers has enabled a fast and cost-effective prototyping system. 【Benefits of H-FCD】 - Satisfies the mechanical properties of FCD800 and FCD900 in a cast state (process reduction) - Forms complex shapes in one go (alternative to forging) - Allows for the formation of complex structures compared to forging (high strength and lightweight) - Enables extremely small drilling processes (excellent machinability) - Higher strength can be achieved through heat treatment (high strength) *For more details, please refer to the PDF document or feel free to contact us.

Company：日本継手東京営業部
Price：Other

Contract manufacturing
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

20K continuous delivery pipe fittings

Excellent pressure resistance! Can be used for disaster prevention piping and more, suitable for Schedule 40 and above.

We would like to introduce the "20K Continuous Pipe Fitting" handled by Nippon Joint Co., Ltd. It excels in pressure resistance and strength, and the installation method is similar to conventional threaded pipe fittings, making it safe and easy to use. It has excellent durability, and the material and construction costs are low, making it economical. Additionally, we also offer "PCHB Fittings" designed for corrosion prevention in buried fire protection piping. Please feel free to contact us if you have any requests. 【Features】 ■ Suitable for pressure piping ■ Excellent workability ■ Superior economic efficiency *For more details, please refer to the PDF materials or feel free to contact us.

Company：日本継手東京営業部
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Branch saddle

As part of the cost reduction for the welding piping method for branches, we have developed a productized welding branch saddle for fire hydrants!

We would like to introduce the "Branch Saddle" handled by Nippon Joint Co., Ltd. Compared to previous branching methods, it significantly reduces costs and resolves the shortcomings of conventional branching pipe methods all at once. The branch take-off section is available in two types: threaded and welded, and thanks to the stopper's function, there is no misalignment or angle deviation. 【Features】 ■ Provides sufficient flow rate ■ No misalignment or angle deviation due to the stopper's function ■ Achieves significant cost reduction ■ The branch take-off section is available in two types: threaded and welded *For more details, please refer to the PDF document or feel free to contact us.

Company：日本継手東京営業部
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Crossing at an angle

Installation work is easy! The length of the hanging band from the ceiling can be standardized.

The "Diameter-Difference Cross" is a product that can simplify piping, thus maintaining aesthetic appeal. It reduces the number of threaded connections, making the workload lighter, and allows for a consistent length of the hanging band from the ceiling, making installation easier. Additionally, we also offer the "Three-Way Diameter-Difference Tee." Please feel free to contact us if you have any requests. 【Features】 ■ Simplifies piping, thus maintaining aesthetic appeal ■ Reduces the number of threaded connections, making the workload lighter ■ Allows for a consistent length of the hanging band from the ceiling, making installation easier *For more details, please refer to the PDF document or feel free to contact us.

Company：日本継手東京営業部
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stagnant water prevention fitting

Lineup of 25A! It can also accommodate large rooms such as cafeterias.

The "Stagnation Water Prevention Joint" is a product for SP piping used in water supply connections. With a lineup of 25A, it can accommodate large rooms such as dining halls. There are varieties with a core available, and it can also be used with lined steel pipes. The material used is bronze casting, and it is certified by the Japan Water Works Association. Please feel free to contact us if you have any inquiries. 【Features】 ■ With a lineup of 25A, it can accommodate large rooms such as dining halls. ■ There are varieties with a core available, and it can also be used with lined steel pipes. *For more details, please refer to the PDF document or feel free to contact us.

Company：日本継手東京営業部
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

NZ II Joint

No leaks up to an air pressure of 0.5 MPa! Lightweight and compact gas insulation joint.

The "NZ II Joint" is a product that features an electric insulation material on the surface of the threaded part of the cast body, shaped according to the JIS B 0203 "Pipe Taper Thread" specifications. Thanks to our unique development, it has insulation sections at both ends of the joint, providing excellent insulation properties, making post-installation insulation testing easy, and enhancing aesthetic appeal. In the event of a fire, we have selected electric insulation materials and designed the insulation layer to prevent gas leakage, allowing for safe use. 【Features】 ■ Lightweight and compact ■ Excellent insulation properties ■ Insulation sections at both ends ■ Sufficient fire resistance *For more details, please refer to the PDF document or feel free to contact us.

Company：日本継手東京営業部
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gas polyethylene pipe fitting materials "SSB Series"

Branching out from various existing pipes to polyethylene pipes is speedy and economical!

The "SSB Series" is a gas polyethylene pipe material that allows for easy direct perforation of existing low-pressure piping and branching off of PE pipes. It combines the functions of a chip recovery device and a no-blow shutter device, featuring a transition structure with a pre-connected PE short pipe on the branching side. This improves workability and efficiency, significantly reducing costs. Additionally, the excavation area is about one-third compared to conventional methods, which also reduces environmental impact. 【Features】 ■ Allows for easy direct perforation of existing low-pressure piping and branching off of PE pipes ■ Transition structure ■ Improved workability and efficiency, leading to significant cost reductions ■ Excavation area is about one-third compared to conventional methods, reducing environmental impact *For more details, please refer to the PDF document or feel free to contact us.

Company：日本継手東京営業部
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stainless steel threaded joint

Excellent quality, high corrosion resistance! Suitable for general piping such as steam, air, gas, water, and oil.

The "stainless steel threaded fittings" are products that excel in corrosion resistance and are expected to have a long lifespan. There is no leaching of harmful substances, making them safe and hygienic, with no worries about red water or blue water. By manufacturing using the lost-wax casting method (precision casting method), they achieve high dimensional accuracy, and the surface finish and size markings are clearer compared to traditional methods. The small ribs improve workability and contribute to weight reduction. 【Features】 ■ No leaching of harmful substances, safe and hygienic with no concerns about red water or blue water ■ Excellent corrosion resistance and expected long lifespan ■ Recyclable *For more details, please refer to the PDF document or feel free to contact us.

Company：日本継手東京営業部
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stainless Steel Pipe Fitting "EG Joint"

Welding and threading processes are unnecessary, reducing man-hours! Achieving space-saving and speedy construction.

The "EG Joint" is a one-touch stainless steel pipe fitting. It allows for easy connection by simply inserting the pipe into the main body of the fitting, and the removal of the pipe is simple with a remover (removal jig). Additionally, there are no burrs from threading or welding slag, and since the fitting is made of SUS, the fluid remains clean at all times. 【Features】 ■ Connection by simply inserting the pipe into the main body of the fitting ■ No need for pipe joining tools ■ Rework is possible ■ Improved construction quality ■ Clean and safe *For more details, please refer to the PDF document or feel free to contact us.

Company：ヤマデン
Price：Other

Piping Materials
Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Advantages of Copper Pipes in Refrigerant Piping for Air Conditioning | Refrigerant "Copper" Piping for Air Conditioning

Utilizing its excellent corrosion resistance, it is widely used in building roofing materials, exterior materials, and industrial equipment!

Copper is a soft metal with moderate ductility, making it easy to shape. Various processing methods such as bending, cutting, pressing, and drawing can be employed, allowing for the machining of complex shapes. Additionally, brazing is also easy, which is advantageous for connecting pipes. Due to its excellent workability, copper makes on-site work easier and can be considered a material rich in constructability. *For more detailed information, please refer to the related links. Feel free to contact us for further inquiries.*

Company：シーユー・トピア本社
Price：Other

Other metal materials
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Metal gasket joint "SUPER TOM joint"

Preventing piping circulation, reducing tightening torque, and improving sealing performance!

The "SUPER TOM Joint" is a metal gasket seal joint with a supply rotation prevention feature. By incorporating a high-load thrust bearing inside the female nut, it achieves prevention of supply rotation in piping, reduction of tightening torque, and improvement of sealing performance. It is compatible with metal gasket seal joints from other manufacturers, allowing for installation using conventional methods. Additionally, we also offer the "TOM Joint," a metal gasket seal joint that helps reduce piping costs. 【Features】 < SUPER TOM Joint / TOM Joint > ■ Ultra-precise cleaning process that removes metal ion components ■ High sealing performance achieved with low tightening torque (SUPER TOM) ■ No supply rotation in piping (SUPER TOM) ■ Prevents seizure and galling ■ Management number engraved on the product (traceability management) ■ Compatible with metal gasket seal joints from companies like Swagelok (VCR) *For more details, please refer to the PDF document or feel free to contact us.

Company：三興工業
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Environmental Compatibility Copper Pipe Insertion Joint Catalog 2012

A wide variety of products are featured, including BTHC type half unions, BTNT type bag nuts, and BTTG type gauge branch tees.

This catalog features environmentally friendly copper pipe fittings handled by Makizaki Co., Ltd. With excellent structural properties such as seismic resistance, impact resistance, pressure resistance, and airtightness, these fittings offer superior convenience and efficiency compared to connecting copper pipes through brazing or flaring. We introduce a rich lineup including the "BTHC Type Half Union," "BTFC Type Half Union (Female)," and "BTUB Type Panel Union." [Contents] - List of product names - Product specifications - Structure and assembly of the fittings *For more details, please refer to the PDF document or feel free to contact us.

Company：マキザキ
Price：Other

others
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Carbon Steel and Stainless Steel Fittings Catalog 2018

Includes carbon steel fittings, stainless steel fittings, and carbon steel and stainless steel union fittings.

This catalog features the carbon steel and stainless steel fittings handled by Makizaki Co., Ltd. It includes a wide range of products, starting with the carbon steel fitting "HL1 Type 90° Elbow," as well as the stainless steel fittings "HSL1 Type 90° Elbow" and "Hydraulic 210kg/cm² Pipe Flange." We provide detailed specifications and dimensions of the threaded and socket-weld pipe fittings, along with product photos and diagrams. [Contents] ■ Specifications of threaded and socket-weld pipe fittings (1) – (4) ■ Carbon steel fittings ■ Stainless steel fittings ■ Introduction of bite fittings ■ Carbon steel and stainless steel union fittings ■ Technical documents *For more details, please refer to the PDF materials or feel free to contact us.

Company：マキザキ
Price：Other

others
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Brass Fittings Catalog 2017

A wide variety of products are featured, including the KN1 type hex nipple, KG1 type gauge holder, and KAN type NPT×R nipple.

This catalog features brass fittings and other products handled by Makizaki Co., Ltd. We offer a wide range of items including the "KN1 type hex nipple," "KS2 type male-female socket," "KSL type adapter," and "KL1 type 90° elbow." Along with product photos, we clearly present dimensions, features, and applications. [Contents] ■ Fittings ■ Gauge holders ■ Conversion adapters ■ Hose connectors ■ Various hoses *For more details, please refer to the PDF document or feel free to contact us.

Company：マキザキ
Price：Other

others
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

List of Processing Achievements of Daiki Seiko Co., Ltd. [Also Compatible with Difficult-to-Cut Materials such as Stainless Steel] (1)

Introducing our processing achievements for hose fittings used in the food industry!

We would like to introduce the machining achievements of Taiki Seiko Co., Ltd., which handles cutting and lathe processing of stainless steel and iron. We processed hose fittings for the food industry. The material used was SUS304 (stainless steel). Our company is confident in cutting stainless steel (SUS304, SUS316L, SUS630) based on our unique processing programs and thorough management systems developed from our accumulated know-how. 【Processing Overview】 ■ Food Industry ■ Hose Fittings ■ Material: SUS304 (Stainless Steel) *For more details, please refer to the PDF document or feel free to contact us.

Company：太喜精工
Price：Other

Processing Contract
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Japanese-made resin joint "ARAM Tube Connector PP"

This is a polypropylene tube connector made in Japan that achieves a reasonable price! Leave plastic fittings to ARAM!

The "ARAM Tube Connector PP" is a joint made of polypropylene (PP) that achieves a reasonable price while being made in Japan. It has become one of the long-selling products among ARAM's original offerings. The compatible tube inner diameters are: Minimum inner diameter: 3mm Maximum inner diameter: 10mm (13mm for variable diameter types) to We have created a product lineup that can accommodate a wide range of sizes! The shape, Straight Y-type T-type to We have a variety of easy-to-use shapes! The ARAM Tube Connector PP makes plastic fittings easier to use, Keep costs down, and achieving Japanese quality, supporting your manufacturing. *For more details, please refer to the PDF document or feel free to reach out to us.*

Company：アラム
Price：Less than 10,000 yen

Piping Materials
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Secure connection! Japanese-made fluororesin fittings are ARAM Lock!

Easily and securely connect fluororesin tubes! The Japanese-made fluororesin connector, "ARAM lock," is highly recommended for its excellent chemical resistance!

"ARAM lock" is a Japanese-made plastic tube joint (fitting) suitable for connecting fluororesin (PTFE, PFA) tubes. By using a dedicated groove-cutting cutter to create a groove in the tube, inserting a ferrule into it, and simply tightening it with a nut on the ARAM lock main body, a secure connection can be achieved. (Utility Model Registration No. 3062049) The main body of ARAM lock is made of PFA, which provides excellent chemical resistance. Additionally, it employs trapezoidal threads, allowing for a firm tightening! The nut is also designed with a hexagonal shape and has a knurled finish, enabling manual tightening. The "ARAM lock," which realizes Japanese quality while being user-friendly and cost-effective, supports your manufacturing needs with fluororesin tube piping. *For more details, please refer to the PDF document or feel free to contact us.

Company：アラム
Price：Less than 10,000 yen

Piping Materials
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compact Japanese-made resin joint "ARAM N Joiner"

With an internal design that minimizes flow and pressure loss, we have achieved a compact shape! Introducing plastic fittings compatible with a wide range of tube sizes!

The "ARAM N Joiner" is a fitting designed with a larger inner diameter compared to conventional resin connectors, minimizing flow and pressure loss. Despite being made in Japan, it is offered at a reasonable price. Documentation for RoHS and REACH SVHC is available. We can also provide a chem SHERPA file. We offer two materials: polypropylene (PP) and polyvinylidene fluoride (PVDF)! The compatible tube inner diameters range from: - Minimum inner diameter of 6mm - Maximum inner diameter of 16mm This accommodates a wide variety of tube and hose sizes! The shapes available include: - S type (straight) - L type (elbow) - Y type - T type - E type (different diameter type) We have various samples available. Please feel free to contact us. *For more details, please refer to the PDF document or feel free to reach out to us.

Company：アラム
Price：Less than 10,000 yen

Piping Materials
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Japanese-made PVC joint "ARAM Hose Connector PVC"

Securely connect a wide range of tubes with an inner diameter of 9 to 25 mm! This is a simple-shaped and reasonably priced PVC (polyvinyl chloride) resin fitting!

The "ARAM Hose Connector PVC" is a hose barb made of polyvinyl chloride (PVC) that, despite its simple shape, securely connects tubes and hoses. It is reasonably priced while being made in Japan. The materials used comply with the self-imposed standards (JHP standards) set by the Vinyl Food Sanitation Council regarding "food containers and packaging made of vinyl chloride resin." Documents for RoHS and REACH SVHC submission are available. Additionally, we can provide a chem SHERPA file. The compatible inner diameters of the tubes are: - Minimum inner diameter: 9mm - Maximum inner diameter: 25mm This accommodates a wide range of tube and hose sizes! The shapes available include: - S-type (straight) - L-type (elbow) - Y-type - T-type We have various samples available. Please feel free to contact us. *For more details, please refer to the PDF materials or feel free to reach out to us.

Company：アラム
Price：Less than 10,000 yen

Piping Materials
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Japanese-made PVC hose nipple fitting "ARAM PVC Nipple Nut"

Compatible with a wide range of tubes with an inner diameter of 9 to 25 mm! The nuts are common across all sizes, allowing for cost reduction with this PVC hose nipple fitting!

The "ARAM PVC Nipple Nut" is a hose nipple fitting made in Japan, using materials that are excellent in acid resistance and weather resistance, specifically made of polyvinyl chloride (PVC). Despite being made in Japan, it is offered at a reasonable price, and documentation for RoHS and REACH SVHC compliance is available, even though it is made of polyvinyl chloride. Additionally, we can provide a chem SHERPA file (excluding gaskets). The nut is common across all sizes, which allows for a reduction in the number of parts and simplifies work, ultimately leading to cost reduction. The compatible tube inner diameters are: Minimum inner diameter: 9mm Maximum inner diameter: 25mm to It is compatible with a wide range of tube, hose, and pipe sizes! We can provide various samples. Please feel free to contact us. *For more details, please refer to the PDF document or feel free to reach out to us.

Company：アラム
Price：Less than 10,000 yen

Piping Materials
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fittings Product List and Ranking from 394 Manufacturers, Suppliers and Companies | IPROS GMS

Fittings Manufacturer, Suppliers and Company Rankings

Fittings Product ranking