Fittings Product List and Ranking from 392 Manufacturers, Suppliers and Companies

Fittings for High-Density Polyethylene Pipes (ISO) - Suppon MPX

No need for electric fusion, easy installation with just one wrench! Thanks to the mechanical method, installation can be done anywhere, including wet areas!

The Suppon MPX is a fitting that allows for the connection of polyethylene pipes for water distribution without the need for an in-core or disassembly. Since it can connect polyethylene pipes using a mechanical method, there is no need for electric fusion work, and it can be installed with just one wrench, allowing for immediate water flow. Because electric fusion work is not required, it can be easily installed in locations where spring water and other water sources may occur, making it versatile for various environments. With a wide range of options available for connecting different types of pipes, it is ideal for all kinds of job sites.

Company：川西水道機器
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fittings for high-density polyethylene pipes (ISO outer diameter) for SKXISO-P.

Significant reduction in construction time is possible with mechanical construction methods! No electric fusion work required, making it easy to install joints in wet areas and confined spaces!

SKX is the industry's first joint that does not require disassembly and can be installed using a short wrench. It is ideal for connecting to existing pipes in renovation work for buildings such as apartments. The connection of high-density polyethylene pipes is mechanical rather than fusion, significantly reducing installation time. Since it can be installed with fewer tools, total costs can also be reduced. Water can be passed through immediately after connection. The low tightening torque allows for installation with short tools like a short wrench, enabling time savings and installation in tight spaces. It can also be installed at sites with water accumulation, such as from spring water, as electrical fusion work is not required. There is also a rich lineup of fittings, including reducing sockets, elbows, tees, male-threaded sockets, and female-threaded sockets.

Company：川西水道機器
Price：Other

Pipe Fittings
Piping Materials
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inner and outer coated steel pipe × high-density polyethylene pipe Supon MPX MP-D

A mechanical joint that connects internally and externally coated steel pipes with high-density polyethylene pipes (ISO outer diameter)! Since coating removal and fusion work are unnecessary for joining, construction time is reduced!

No disassembly required for connection! Introducing the "Suppon Joint" series, a mechanical joint method that simply requires insertion and tightening! The product we are introducing this time is the "Suppon MPX MP-D." It is a joint that connects high-density polyethylene pipes with internally and externally coated steel pipes (VD pipes and PD pipes). The Suppon MD Joint is characterized by its ability to be installed without removing the outer coating of the internally and externally coated steel pipes (VD pipes and PD pipes). It allows for connection without disassembly, and installation can be done with just a torque wrench, making it extremely user-friendly. Since the connection of high-density polyethylene pipes is a mechanical connection rather than a fusion connection, it can be installed in wet areas and connected to existing pipes. Additionally, the installation is simple, requiring only the tightening of bolts and nuts with a wrench, eliminating the need for a fusion machine. It can also slide along the pipe, making it easy to connect existing pipes with newly installed ones. Water can flow immediately after connection, significantly reducing construction time. When using new high-density polyethylene pipes for renovation work, it can be utilized at the junction with existing PD and VD pipes. Please give it a try when connecting dissimilar pipes, such as internally and externally coated steel pipes and high-density polyethylene pipes.

Company：川西水道機器
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Outer and inner coated steel pipe × Poly pipe for drainage Supon MPX MP-D

A mechanical joint that connects coated steel pipes and sewer poly pipes! Since coating removal and fusion work are unnecessary for joining, construction time is reduced!

No disassembly required for connection! Introducing the "Suppon Joint" series, a mechanical joint method that simply requires insertion and tightening! The product we are introducing this time is the "Suppon MPX MP-D." It is a joint that connects polyethylene pipes for sewage with internally and externally coated steel pipes (VD pipes and PD pipes). The Suppon MD Joint is characterized by its ability to be installed without removing the outer coating of the internally and externally coated steel pipes (VD pipes and PD pipes). It can be joined without disassembly, and installation can be done with just a torque wrench, making it extremely user-friendly. Since the connection of sewage polyethylene pipes is a mechanical connection rather than a fusion connection, it can be installed in wet areas and connected to existing pipes. Additionally, the installation is simple, requiring only the tightening of bolts and nuts with a wrench, eliminating the need for fusion equipment. It can also slide along the pipe, making it easy to connect existing pipes with newly installed pipes. Once connected, water can flow immediately, significantly reducing construction time. Please give it a try when connecting dissimilar pipes between internally and externally coated steel pipes and polyethylene pipes for sewage.

Company：川西水道機器
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-density poly pipe (ISO) × steel pipe Suppon MPX MP-V

Switching pipe types with flange-less connections between steel pipes and high-density polyethylene pipes! No need for flange processing or welding of steel pipes, simplifying construction and reducing costs!

No disassembly required, easy connection! Introducing the "Suppon Joint" series of mechanical connection methods! The "Suppon MPX MP-V" joint is useful when switching from high-density polyethylene pipes (ISO outer diameter) to steel pipes. On the high-density polyethylene side, there is no need for an in-core, disassembly, or electric fusion work, allowing for smooth construction operations. Since there is no cooling time, water can be passed through immediately, significantly reducing construction time. Additionally, on the steel pipe side, mechanical joining eliminates the need for threading or flange welding. Construction can begin immediately after cutting the steel pipe. Since the pipe type transition is not a flange connection, the risk of water leakage from the flange area is reduced, and it also excels in safety aspects such as earthquake resistance. It is also possible to slide along the pipe, making it easy to connect existing and newly installed pipes. This can be utilized for repairs or renovations of aging piping systems at the connection points with existing pipes. If disassembly is needed, it can be easily removed by simply loosening the installed bolts and nuts. Please give it a try when connecting different types of pipes, such as high-density polyethylene pipes (ISO outer diameter) and steel pipes.

Company：川西水道機器
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-density poly (ISO) × (JIS) MPX MP-V (for JIS-P)

Convert high-density polyethylene pipes (ISO outer diameter) to high-density polyethylene pipes with JIS outer diameter! A mechanical joint that solves the "troubles" on site!

No disassembly required, easy connection! Introducing the "Suppon Joint" series of mechanical joints! The Suppon MPX is a mechanical joint that allows for pipe connections simply by inserting and tightening high-density polyethylene pipes (ISO outer diameter). It eliminates the need for an in-core, disassembly, and electric fusion work, enabling smooth construction operations. One of its lineup, the "Suppon MPX MP-V (for JIS-P)," is a joint that can connect high-density polyethylene pipes (ISO outer diameter) with polyethylene pipes of JIS outer diameter. For example, if you encounter a situation where "the high-density polyethylene pipe you prepared and the existing pipe installed are of different standards," this product allows you to convert and connect them at the joint. It can also slide along the pipe, making it easy to connect existing and new pipes. It can be utilized at the connection points during repairs or renovations of aging piping. Please give it a try when switching between high-density polyethylene pipes (ISO outer diameter) and high-density polyethylene pipes (JIS outer diameter).

Company：川西水道機器
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-density polyethylene pipe (ISO) × cast iron pipe Supon MPX MP-D

High-density polyethylene pipes can be connected to cast iron pipes with just one joint! A mechanical joint that allows easy connection to existing pipes without disassembly through a slide joint!

No disassembly required, easy connection! Introducing the "Suppon Joint" series of mechanical connection methods! The Suppon MPX is a mechanical joint that allows for pipe connection simply by inserting and tightening high-density polyethylene pipes (ISO outer diameter). It eliminates the need for an in-core, disassembly, and electric fusion work, enabling smooth construction operations. The product we are introducing this time is the "Suppon MPX MP-D." It is a joint that allows for switching from high-density polyethylene pipes (ISO outer diameter) to cast iron pipes. It accommodates cast iron pipes with sizes ranging from φ75mm to 150mm. During the joining of cast iron pipes, no disassembly is required, and no lubricant or insertion machine is needed; you can simply insert the pipe and tighten the bolts and nuts for construction. It is also possible to slide along the pipe, making it easy to connect existing pipes with newly installed ones. This can be utilized for repairs or renovations of aging piping, particularly at the connection points with existing pipes. If removal is necessary, it can be easily detached by loosening the installed bolts and nuts. Please give it a try when connecting dissimilar pipes of high-density polyethylene (ISO outer diameter) and cast iron.

Company：川西水道機器
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-density polyethylene pipe (ISO) × coated steel pipe Suppon MPX MP-D

Connection can be made without fusion work or coating removal work, reducing construction time! A mechanical joint that allows flange-less connection of high-density polyethylene pipes and internally and externally coated steel pipes!

No disassembly required for connection! Introducing the mechanical joint series "Suppon Joint"! The product we are introducing is the "Suppon MPX MP-D". It is a mechanical joint for connecting different types of pipes, allowing a switch from high-density polyethylene pipes (ISO outer diameter) to internally and externally coated steel pipes (VD pipes, PD pipes). On the high-density polyethylene pipe side, it is a mechanical joint that can be connected without the need for an in-core or disassembly. There is no need for electric fusion work or preparation of fusion machines. On the internally and externally coated steel pipe side (VD pipes, PD pipes), special tasks such as threading and coating removal are not required. The mechanical method simply involves inserting and tightening into the joint socket, significantly reducing the time required for connection. Additionally, since the pipe type switching section is flange-less, the risk of water leakage from the flange area is also reduced, making it excellent in terms of safety, including earthquake resistance. It can slide along the pipe, making it easy to connect existing pipes with newly installed pipes. During renovation work, such as replacing buried coated steel pipes in facility exteriors with new high-density polyethylene pipes, it can be utilized at the pipe type switching points with existing pipes. Please give it a try when connecting different types of pipes, such as high-density polyethylene pipes (ISO outer diameter) and internally and externally coated steel pipes (VD pipes, PD pipes).

Company：川西水道機器
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-density polyethylene pipe (ISO) × SUS pipe Suppon MPX MP-V

Flangeless connection of high-density polyethylene pipes and stainless steel pipes reduces the risk of leaks! A mechanical joint that eliminates the need for threading or electric fusion work!

No disassembly required, easy connection! The mechanical joint series "Suppon Joint"! Suppon MPX is a mechanical joint that allows pipe connection simply by inserting and tightening high-density polyethylene pipes (ISO outer diameter). It eliminates the need for an in-core, disassembly, and electric fusion work, enabling smooth construction operations. When switching from high-density polyethylene pipes (ISO outer diameter) to stainless steel pipes is necessary, the "Suppon MPX MP-V (for SUS)" comes in handy. On the high-density polyethylene side, there is no need for electric fusion work, allowing for immediate water flow and a reduction in construction time. On the stainless steel pipe side, there are no threading or flange welding tasks due to mechanical joining. Since the pipe type switching section is not a flange connection, the risk of water leakage from the flange area is also reduced, making it excellent for safety aspects such as earthquake resistance. It is also possible to slide along the pipe, making it easy to connect existing and newly installed pipes. If disassembly is required, it can be easily removed by simply loosening the installed bolts and nuts. Please give it a try when connecting different types of pipes, such as high-density polyethylene pipes (ISO outer diameter) and stainless steel pipes.

Company：川西水道機器
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-density polyethylene pipe for water supply (JIS) × water supply polyethylene pipe, dissimilar pipe joint SKX

No need for fusion work or in-core insertion work! High-density polyethylene pipes can be connected to water supply polyethylene pipes with a single fitting!!

SKX is the industry's first hybrid pipe fitting that does not require disassembly and can be installed with a short wrench, making it ideal for switching between existing and new pipes during renovations in apartments and similar settings. The product we are introducing this time is the "SKX Socket for High-Density Polyethylene Pipe (JIS) for Water Supply × Polyethylene Pipe for Municipal Roads." It is a fitting that allows for easy connection between high-density polyethylene pipes (JIS) for water supply and polyethylene pipes for municipal use using a mechanical method. Since the connection of high-density polyethylene pipes (JIS) is a mechanical connection rather than a fusion connection, it can be installed in wet areas and connected to existing pipes. Additionally, it significantly reduces installation time, and water can flow immediately after connection. For connecting polyethylene pipes for water supply, there is no need for core drilling, allowing for immediate installation after cutting the pipe. SKX features a through-type design, enabling easy installation and connection from existing pipes. Furthermore, with low tightening torque, it can be installed using short tools like a short wrench, facilitating time-saving installations even in tight spaces. Disassembly is possible simply by loosening with a tool. With a rich lineup of different diameter sockets, elbows, and male-threaded sockets, as well as connections for hybrid pipes, it accommodates various connection needs.

Company：川西水道機器
Price：Other

Pipe Fittings
Piping Materials
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Steel joining methods for thick plates with a large thickness-to-width ratio and thin plates.

Very high fastening strength with just one step! Fastening different thicknesses of iron that are difficult to weld without pre-drilling. No heat is generated, and it can be easily used by anyone.

Generally, it is said that thick plates and thin plates with a large thickness-to-width ratio are difficult to weld. When the ratio of thin plates to the total plate thickness is high, the difficulty of welding increases. We will introduce a method that allows for easy fastening even under such conditions. 1. 'RIVSET' is a high-strength, reliable self-piercing rivet. It mechanically joins different types of materials easily without the need for a pilot hole. It is also possible to fasten more than three materials. This product penetrates the upper base material and expands at the tip due to the shape of the die within the lower base material. 2. In the context of the need for CO2 reduction, the fastening method RIVCLINCH, which uses only air as a power source, does not generate heat and does not use auxiliary materials such as rivets, relies on plastic deformation. By applying multiple points, it can achieve comparable shear strength to spot welding and SPR. 3. 'RIVTAC' allows for high-speed fastening of high-strength materials without the need for a pilot hole. It can be used for profile structures with one-sided access fastening and is compatible with fastening dissimilar materials and the use of adhesives.

Company：ベルホフ
Price：Other

nut
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluid equipment piping components pipe fittings

"Connecting thoughts, changing the flow" - Possibilities expand from just one joint!

The fittings mainly called elbows serve to change the direction of fluid (gas or liquid) flow. Depending on the usage, they are classified into three types based on the bending angle: 45°, 90°, and 180°. Additionally, fittings known as tees and wyes have the function of branching or merging fluid flow. Nipples and sockets connect fittings of the same diameter or extend their length, while reducers and bushings connect fittings of different diameters, allowing for the expansion or reduction of pipe size. Fittings such as caps and plugs function to stop the flow of fluid by sealing the ends of pipes. Fittings also serve other roles, such as transmitting mechanical power and absorbing vibrations or thermal expansion.

Company：タカシマ締結部品・加工部品　ものづくり総合商社
Price：Other

Pipe Fittings
Fittings

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The galvanized version of the pipe disconnection prevention fitting [Nukedome-kun] is now available!

Using couplings for the connection of pressure piping reduces the risk of disconnection due to insufficient bolt tightening.

Significantly reduce the risk of disconnection! We mitigate the risk of piping disconnecting from the Atom's coupling due to insufficient bolt tightening. *For those interested, we also provide access to "tensile test data," so please feel free to contact us. 【Features】 ■ Simple installation by just tightening the bolts. ■ Solid support with joint fittings and angle pieces that have a thickness of 6mm (Note 1). ■ High-strength bolts with a strength classification of 10.9 (Note 2) are used for the joint fitting bolts, allowing for tightening at high torque values. Note 1: For sizes 20A to 32A, the thickness is 4.5mm. Note 2: Galvanized products are equivalent to 8.8. *For more details, please refer to the PDF materials or feel free to contact us.

Company：アトムズ
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

For vibration insulation in piping, rubber spherical vibration isolation joints can be selected according to the application!

We can accommodate various rubber materials and flange standards. Please consult with us.

This product is a synthetic rubber spherical vibration isolator from the flexible joint (synthetic rubber vibration joint) series. Standard model equipped with JIS 10K flange (SS400). It can be modified to various standard flanges such as JIS 5K, JIS 20K, drinking water, ANSI, etc. A flat inner surface type is also available. 【Features】 ■ Excellent vibration isolation performance ■ Made of EPDM ■ Compliant with the Ministry of Land, Infrastructure, Transport and Tourism specifications ■ Compliant with the Air Conditioning and Sanitary Engineering Society standards ■ Uses rubber compliant with JIS K 6353 *For more details, please refer to the PDF document or feel free to contact us.

Company：アトムズ
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The no-fire construction method uses coupling joints! Repair clamps for fluid leaks and seepage!

For piping connections in renovation work, we use fire-free coupling joints. We have various repair clamps available that can be used for continuous water flow to prevent fluid leakage.

The Atom's coupling is a mechanical pipe joint that excels in strength and workability, making it safe to use with piping such as SGP, SUS, and those with similar outer diameters, while also being labor-saving and cost-effective. 【Features】 ■ Can be installed with just one torque wrench ■ Easy on-site installation ■ Lighter than flange connections ■ No secondary processing of piping required ■ Prefabrication is possible ■ Reduces total costs ■ Can be installed in small spaces ■ Can absorb angular deviations ■ Shortens installation time

Company：アトムズ
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Easy-to-install exposed piping drainage joint" offered at a reasonable price!

Made of soft PVC, it is also excellent in weather resistance. Please note that it will be discontinued once stock runs out.

This product is a drainage joint for exposed piping in the flexible joint (synthetic rubber vibration-damping joint) series. It features an easy installation with band fastening and a flat inner surface that eliminates concerns about liquid pooling. It has passed a 2000-hour accelerated weather resistance test using a Sunshine Weather Meter. It is suitable for piping with similar outer diameters, including carbon steel pipes for piping and other steel pipes. 【Features】 ■ Safe, clean, and inexpensive resin drainage joint ■ Easy installation with band fastening ■ Flat inner surface eliminates concerns about liquid pooling *For more details, please refer to the PDF materials or feel free to contact us.

Company：アトムズ
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The no-fire method is ideal for connecting pressure piping in renovation work with coupling joints!

The rubber sealing for the liquid connection is available in EPDM, NBR, and silicone, and can be selected based on the fluid.

The Atom's coupling is a mechanical joint that excels in strength and workability, making it safe to use with piping such as SGP, SUS, and those with similar outer diameters, while also being labor-saving and cost-effective. The "GR type" is a connecting coupling suitable for piping connections in narrow spaces. It has excellent grip strength to prevent disconnection and can be installed with just one torque wrench. Additionally, there are products certified by the Japan Water Works Association and GR fire-certified products, as well as options with inner plates for connecting negative pressure piping. 【Features】 ■ No secondary processing of piping is required ■ Can be installed with just one torque wrench ■ Ideal for piping connections in narrow spaces ■ Excellent grip strength to prevent disconnection *For more details, please refer to the PDF materials or feel free to contact us.

Company：アトムズ
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Lightweight and easy-to-handle coupling fittings for low-pressure piping" is a popular product!

Affordable prices and very popular. We always have stock from 20A to 200A.

The Atom's coupling is a mechanical joint that excels in strength and workability, making it safe to use with piping such as SGP, SUS, and those with similar outer diameters, while also being labor-saving and cost-effective. The "FZ type" is suitable for connecting low-pressure piping as well as drainage and ventilation piping. Additionally, it is a budget-friendly version of the connection coupling, priced lower than conventional products. 【Features】 ■ No secondary processing of piping required ■ Can be installed with just one torque wrench ■ Allows for piping connections in narrow spaces ■ More affordable than conventional products *For more details, please refer to the PDF document or feel free to contact us.

Company：アトムズ
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

A structure that prevents liquid accumulation in the connection between cast iron pipes and PVC pipes for drainage!

The renewal work of the cast iron drainage pipe (CIP) can be connected to PVC pipes. It can be easily installed even in narrow spaces within the pipe shaft.

It is suitable for the renovation work of vertical pipes inside the pipe shaft. By using the "VC type," you can easily connect cast iron drainage pipes and VP pipes. ★ It can also be used with VU pipes. * Please check the insertion side of each pipe on the label. 【Features】 ■ No secondary processing of piping is required ■ Can be installed with just one torque wrench ■ Allows for piping connections in narrow spaces * For more details, please refer to the PDF materials or feel free to contact us.

Company：アトムズ
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

No need for screwing or welding pipe fittings "Housing type pipe fittings" MIE-K

【Type 001 complies with fire safety regulations!】 A housing joint that can be connected with two bolts. Achieves a significant reduction in work time! *Catalog available now!

The housing type pipe fitting "MIE-K" is a pipe fitting that does not require threading or welding. It is a housing fitting that can be tightened using only the included bolts and nuts with a glove-type pipe fitting. Compared to flanges, its outer dimensions are smaller, making it easy to install in narrow spaces. Additionally, since only two bolts need to be tightened, work time can be reduced. ■ Type 001 complies with the Fire Service Act! [Applicable Standards: B103-16 / B104-13] 【Features】 ■ Significantly reduces work time compared to threading, welding, and flanges ■ Work involves only tightening two bolts ■ Has expansion performance and flexibility characteristics, allowing for the absorption of interlayer displacement *Please refer to the catalog for the lineup of housing fittings. *For inquiries about products compliant with the Fire Service Act, please contact us directly.

Company：ＭＩＥテクノ
Price：Other

Pipe Fittings
Piping Materials
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thoughts on Desire (Desired Things)

We will bring your ideas to life! Custom fittings with special orders for cost reduction, the best cost-performance plumbing.

Our concept for our customers is, "Bringing smiles to three parties with SHS at four expectations!" Three smiles… the joyful faces of "customers," "colleagues," and "oneself." SHS… (S) Optimal (H) Piping (S) System Four expectations… delivering what customers desire, in the form they want, and with the desired cost performance, when they want it. This time, we would like to introduce what we mean by "desired products." What do customers truly want? Our conclusion, after continuous consideration, is that "it is not catalog items, but custom-made products." It is only natural that everyone prefers "something that perfectly fits them." However, what is the reality? Isn't it the case that people are currently selecting from catalogs and trying to make do? We aim to be a manufacturer that can shape customers' "I wish I had that!" With that aspiration, we develop and manufacture a wide variety of products. "If only something like this could be made," "Is there something like this?" If you have any requests, please feel free to contact us!

Company：イハラサイエンス
Price：Other

Other machine elements
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Instrumentation fittings, valves, ALD valves, ultra-high purity fluid piping fittings.

Instrumentation fittings, valves, gas fittings, ultra-high purity fluid piping fittings, ALD valves, gas panels, gas boxes.

Products: Instrumentation fittings, ALD valves, semiconductor fittings and valve products. Manufacturing, design, and sales of piping fitting products for ultra-high purity fluids.

Company：PF
Price：10,000 yen-100,000 yen

valve
Pipe Fittings
tube
Fittings

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Precision Shaft Coupling / Sakai Manufacturing Co., Ltd.

Towards the future of "monozukuri" (manufacturing). Introducing Sakai Precision Shaft Couplings that contribute to the present and future of rotational transmission.

This catalog introduces the "Sakai Precision Shaft Couplings" from Sakai Manufacturing Co., Ltd., which we handle. In addition to the "Model List and Selection Guide," it features "Seven Characteristics of Sakai Precision Shaft Couplings" and a lineup including "Precision Correction Shaft Couplings," "UA-C Series," and "UCN-B Series." Additionally, we have included "Precision Spring Shaft Couplings" and "Precision Fixed Shaft Couplings." Please make use of this information for product selection. [Contents] ■ Model List and Selection Guide ■ Seven Characteristics of Sakai Precision Shaft Couplings ■ Precision Correction Shaft Couplings ■ Precision Spring Shaft Couplings ■ Precision Fixed Shaft Couplings *For more details, please refer to the PDF document or feel free to contact us.

Company：大喜産業
Price：Other

Pipe Fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Construction method: Mechanical rebar joint [EG joint (butt joint type)]

Easy installation without the need for grout material! A compact mechanical rebar joint with good fit.

The 【EG Joint】 is a mechanical rebar joint that connects threaded bars joined at the ends by friction welding using a coupler and tightened with a lock nut. It does not require special techniques, allowing for shortened construction periods. Being groutless, it eliminates the need for temperature control and produces no industrial waste. 〇 Obtained the performance evaluation standard for rebar joints【Grade A】 in the 2007 edition of the Structural Technical Standards for Buildings (Evaluation number by the Japan Architectural Center: BCJ Evaluation-RC 0001-04) 〇 Confirmed the joint performance of the Japan Society of Civil Engineers' "Rebar Anchorage and Joint Guidelines [2007 Edition]" as【Grade SA】【Features】 ○ Sizes D13 to D51, steel grades SD295 to SD490 ○ Only requires tightening with a torque wrench, no grout material needed ○ Easy to install, achieving shortened construction periods ○ Compact design with good fit ○ High reliability as all stress transfer occurs through steel 〇 Can be used as a lightning rod conductor for RC structures 〇 No industrial waste generated as no grout material is used 〇 No ultrasonic inspection required For more details, please contact us or download the catalog.

Company：合同製鐡株式会社
Price：Other

Steel
joint
Fittings

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mechanical Rebar Coupler 【EG Joint (Standard Type)】

Easy installation without the need for grout! A compact and well-fitting mechanical rebar joint.

The 【EG Joint (Standard Type)】 is a mechanical rebar joint that connects threaded bars joined at the ends by friction welding with a coupler, and tightens the lock nut using a torque wrench, allowing for easy installation. Because it is groutless, it can be constructed regardless of weather conditions, which shortens construction time and generates no industrial waste. 〇 Obtained the performance evaluation standard for rebar joints 【Grade A】 in the 2007 edition of the Technical Standards Commentary on the Structural Design of Buildings (Japan Architectural Center Evaluation Number: BCJ Evaluation-RC 0001-04) 〇 Confirmed the joint performance of the Civil Engineering Society's "Rebar Anchorage and Joint Guidelines [2007 Edition]" as 【Grade SA】【Features】 ○ Sizes D13 to D51, Steel grades SD295 to SD490 ○ No grout material needed, just tighten with a torque wrench ○ Not affected by weather conditions during construction ○ Compact and fits well ○ High reliability as all stress transfer occurs through steel 〇 Can be used as a lightning conductor for RC structures 〇 No industrial waste generated as no grout is used ○ Parts are shipped already attached to the rebar, eliminating material management hassle ※ Can also be used as a construction joint.

Company：合同製鐡株式会社
Price：Other

Steel
joint
Fittings

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rubber, elastomer materials hardness test

It is possible to measure the durometer hardness, which is an indicator of the hardness of rubber and elastomer materials!

We offer "hardness testing" at our company. The items include "durometer hardness" applicable to soft materials like rubber and soft plastics, "Rockwell hardness" applicable to many plastics, and "Vickers hardness" applicable to metals and plastics. We also have various measurement records for items such as erasers (e.g., PVC), cutting boards (e.g., PE), car dashboard materials (e.g., PP), plastic lenses for glasses, and plastics. 【Measurement Methods】 ■Eraser (e.g., PVC): Durometer ■Cutting board (e.g., PE): Durometer ■Car dashboard material (e.g., PP): Rockwell ■Plastic lenses for glasses: Rockwell ■Plastics: Vickers *For more details, please refer to the related links or feel free to contact us.

Company：ロンビック
Price：Other

Contract measurement
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Expandable Tube "Synapse Type 10"

A high-pressure type expansion joint optimal for absorbing displacement as much as possible.

This product is a high-pressure type short-stroke expansion joint with a tie rod bolt as standard. It is optimal when the installation length is limited and you want to absorb as much displacement weight as possible. We also offer the JIS 20K flange type "Synapse Type 20" and the low-pressure free type "Synapse Type 5," so please choose according to your application. 【Features】 ■ JIS 10K flange type ■ High-pressure type *This catalog is a digest version. Please contact us if you need the full version. *For more details, please refer to the catalog or feel free to contact us.

Company：日本ニューロン
Price：Other

Piping Materials
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Maintenance cost-free! The secret of 'α-HT1000'

The secret of maintenance-free; the secret of zero running costs.

The "α-HT1000" has no consumable parts, so there is no need for maintenance. We pursue safety through pressure-resistant design in accordance with JIS standards and manage it with a stamped serial number. Our product management system implements traceable traceability, providing peace of mind to all users. The "α-HT1000" does not use power. The "α-HT" is classified as type 3 under JIS standard [JIS Refrigerant Piping Fitting B8607] for piping. The "α-HT" is a piping system that does not require water or electricity. The "α-HT" is a commercial air conditioning fluid stirring device that cleans the refrigerant and maintains its condition, achieving a reduction in air conditioning power consumption. Installation is easy, as it simply adds to the refrigerant pipes you are currently using, and once installed, no maintenance is required. It reduces the power of the outdoor unit, shortens operating time, allows for operation at low current, and can be used during heating. 【Features】 ■ Easy installation ■ No running costs ■ No maintenance required ■ Usable for heating ■ Usable in refrigeration and freezing machines *For more details, please refer to the catalog or feel free to contact us.

Company：グランツ
Price：Other

air conditioning
Refrigerators and freezers
Cooling system
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Quick Fluid Couplings for Food Factories

Improving hygiene management in food manufacturing! A detachable joint that can be attached and removed with one touch.

In the food industry, hygiene management of the manufacturing process is extremely important. In particular, liquid leaks from pipe connections increase the risk of product contamination and foreign matter intrusion, potentially leading to violations of food safety standards. Additionally, areas that require frequent maintenance and cleaning need to have easily detachable piping. Our quick fluid connectors allow for one-touch attachment and detachment, and they are designed to minimize leaks during connection. This contributes to improved hygiene management in food manufacturing. 【Usage Scenarios】 - Connecting and disconnecting piping in food production lines - Piping systems that require cleaning and sterilization - Areas that undergo frequent maintenance and cleaning 【Benefits of Implementation】 - Reduced risk of product contamination due to liquid leaks - Shortened cleaning and maintenance time - Improved work efficiency - Compliance with food safety standards

Company：東洋国際本社
Price：Other

Pipe Fittings
Joints and fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Quick Fluid Fittings for Water Treatment

Prevent leaks in water treatment equipment! Connect and disconnect with one touch.

In the water treatment industry, thorough prevention of fluid leakage is required due to the need for safe operation of equipment and consideration for the environment. Particularly in situations where corrosive chemicals or high-pressure fluids are used, leaks from joints can lead to serious accidents or environmental contamination. Our quick-connect fluid fittings are designed to be easily attached and detached with one touch while minimizing leakage during connection. This improves work efficiency during maintenance and setup changes of water treatment equipment, reducing the risk of leakage. 【Usage Scenarios】 - Water purification plants - Wastewater treatment facilities - Chemical plants - Water quality testing agencies 【Benefits of Implementation】 - Reduced risk of accidents due to leakage - Cost savings from reduced work time - Decreased environmental impact - Improved safety of equipment

Company：東洋国際本社
Price：Other

Pipe Fittings
Joints and fittings
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fittings Product List and Ranking from 392 Manufacturers, Suppliers and Companies | IPROS GMS

Fittings Manufacturer, Suppliers and Company Rankings

Fittings Product ranking