We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Fittings.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Fittings(sus) - List of Manufacturers, Suppliers, Companies and Products

Fittings Product List

1～10 item / All 10 items

Displayed results
Hose fitting with a threaded stainless steel connection (direct connection type for resin tubes)

Hose fitting with a threaded stainless steel connection (direct connection type for resin tubes)

Registered Design No. 1613099 Sanitary Clean Piping Stainless Steel Fitting Heller Ferrule Integrated Fitting Tube Hose

Proposal for the "flexibilization, high functionality, and lightweighting of sanitary piping"! For example... ● I want to streamline the time and effort required for disassembly, cleaning, sterilization, and assembly. (Improvement of workability) ● I want to solve the vibration issues of SUS piping by switching to resin piping. (Vibration absorption and lightweighting through resin) ● I want to connect resin tube piping to the SUS piping system. (Connection piping to the main pipe) ● I want to branch resin tube piping from the SUS piping system. (Branch piping from the main pipe) ● I want to change the diameter of the piping size from the middle of the piping. (Different diameter branch piping) ● I want to visually check the state of the fluid with a highly transparent resin tube. (Visualization) ● I do not want to use threaded piping. (Smooth flow path) ● I do not want to use welded piping. (Prevention of welding degradation) ● I want to ensure a smooth flow path for the fluid. ● I want to directly connect commercially available resin tubes. (Versatility) ● I want to make fittings and tubes reusable. (Waste reduction) ● I would like to accommodate small lot sizes. (Prototypes are very welcome) ★ First, please take a look at the 'catalog' and fill out the necessary information on the attached "Customer Confirmation Sheet," then discuss with the sales representative!

  • Pipe Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless steel fittings for urethane tubes (made of SUS316)

Stainless steel fittings for urethane tubes (made of SUS316)

Stainless steel fittings for urethane tubes (made of SUS316)

This is a stainless steel fitting compatible with the size of urethane tubes. Made of SUS316, it is corrosion-resistant and can be used over a wide temperature range from high to low temperatures. There are no abnormalities in the fitting until the tube breaks. The varieties available are nipple and elbow. ■□■Features■□■ ■Simple structure consisting only of the main body and bag nut ■No abnormalities in the fitting until the tube breaks ■□■Product Lineup■□■ ■SN Nipple ■SL Elbow ■For other functions and details, please download the catalog or contact us.

  • Commercial kitchen equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless steel fittings for fluororesin tubes (made of SUS316)

Stainless steel fittings for fluororesin tubes (made of SUS316)

Stainless steel fittings for fluoropolymer resin tubes (made of SUS316)

This is the standard for fittings for fluororesin (PFA, FEP, etc.) tubes. Made of SUS316, it is corrosion-resistant and can be used over a wide temperature range from high to low temperatures. There are no abnormalities in the fittings until the tube breaks. ■□■ Features ■□■ ■ It has a simple structure consisting only of the main body and the bag nut. ■ Designed specifically for fluororesin tubes, allowing for safe use (there are also options for urethane tubes). ■ There are no abnormalities in the fittings until the tube breaks. ■□■ Lineup ■□■ ■ Stainless fittings SN nipple ■ SL elbow ■ STA tee ■ STB service tee ■ SU union ■ SLU union elbow ■ STU union tee ■ SPF panel union ■ For other functions and details, please download the catalog or contact us.

  • Commercial kitchen equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless steel fittings, metric type, for fluororesin tubes.

Stainless steel fittings, metric type, for fluororesin tubes.

Made of SUS316. It has a simple structure consisting only of the main body and bag nut. Despite being easy to tighten, it is a joint with good airtightness. Nipple, elbow, tee.

This is the standard for fittings for fluoropolymer (PFA, FEP, etc.) tubes. Made of SUS316, it is corrosion-resistant and can be used over a wide temperature range from high to low temperatures. There are no abnormalities in the fittings until the tube breaks. For more details, please visit our company website.

  • Pipe Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless Steel Fitting SN-4X2-M5 Non-Standard Small Fitting (Made to Order)

Stainless Steel Fitting SN-4X2-M5 Non-Standard Small Fitting (Made to Order)

The M5 screw joint for 4X2 tubes has been made super compact. Made of SUS316. It has a simple structure consisting only of the main body and the bag nut, making tightening easy.

It has been developed to meet the needs for compactness. Currently, it is classified as a non-standard product. Made of SUS316, it has corrosion resistance and can be used over a wide temperature range from high to low temperatures. There are no abnormalities in the fittings until the tube breaks. *For more details, please contact us.*

  • Pipe Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Panel union made of SUS316 and brass, partition joint.

Panel union made of SUS316 and brass, partition joint.

No welding required at the pipe inlet and outlet! The panel union is screw-fastened, making it easy to create pipe inlets and outlets, contributing to cost reduction.

In machinery and equipment, it is common practice to weld pipe components to the plates of panels or housings at the inlet and outlet of piping, but this is a labor-intensive task. With a panel union, you simply pass it through a hole in the plate and screw it in place. Since it is clamped with a spring washer, there is no worry about it loosening. By installing it on a thin wall that cannot have screw holes cut, you can form a joint for other threaded piping. There are no screw holes. There is not enough thickness to cut screw holes. There is not enough strength to cut screw holes. You are welding round bars or Rc union fittings just to create screw holes. There are places where you want to secure R threads. We can solve these concerns. *For more details, please contact us.

  • Pipe Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Clean piping stainless steel fitting SN-3X1-R1/4

Clean piping stainless steel fitting SN-3X1-R1/4

This is a nipple fitting for a tube with an inner diameter of 1 mm. Made of SUS316. It has a simple structure consisting only of the main body and a bag nut. Despite being easy to tighten, it is airtight.

We have standardized fittings to meet the needs for 1mm inner diameter (3X1) tubes. They can be applied to silicone tubes and fluoropolymer (PFA, FEP, etc.) tubes. However, for fluoropolymer tubes, the pipe ends need to be slightly enlarged for installation. Made of SUS316, they are corrosion-resistant and can be used over a wide temperature range from high to low temperatures. There are no abnormalities in the fittings until the tube fails. *For more details, please contact us.*

  • Pipe Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Clean piping stainless fittings, metric type, for urethane tubes.

Clean piping stainless fittings, metric type, for urethane tubes.

This is a stainless steel fitting compatible with the size of the urethane tube. There are no abnormalities in the fitting until the tube is destroyed. It is simple, consisting only of the main body and the bag nut.

This is a stainless steel fitting compatible with the size of urethane tubes. Made of SUS316, it is corrosion-resistant and can be used over a wide temperature range from high to low temperatures. There are no abnormalities in the fitting until the tube breaks. There are two types: nipple and elbow. For more details, please visit our company website.

  • Pipe Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Clean piping stainless steel fitting SN-6X4-WE (made to order)

Clean piping stainless steel fitting SN-6X4-WE (made to order)

This is a fitting that is welded to the end of a stainless steel pipe. The plastic tube attachment part has a simple structure consisting only of the main body and a bag nut. The tightening is...

This product was developed in response to the need to connect stainless steel pipes and plastic tubes by welding fittings to the ends of the stainless steel pipes. The plastic tube attachment part is the same as our standard stainless steel fittings. Made of SUS316, it is corrosion-resistant and can be used over a wide temperature range from high to low temperatures. There are no abnormalities in the fittings until the tube fails. *For more details, please contact us.

  • Pipe Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless Steel Fitting SN-12X10-Rc1/4 (Made to Order)

Stainless Steel Fitting SN-12X10-Rc1/4 (Made to Order)

This is a non-standard female screw fitting made of SUS316. It has a simple structure consisting only of the main body and a bag nut.

We developed this in response to the needs for female screw specifications. We will actively accommodate even non-standard requests. It is a joint that is easy to tighten yet has good airtightness. *For more details, please contact us.

  • Pipe Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Fittings

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.