Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
1471～1485 item / All 1526 items
Portable hair dryer the size of a cigarette pack.
A structure combining a NAFION® gas dryer and a desiccant canister. The gas sample flowing through the dryer only comes into contact with the NAFION tube, selectively removing moisture while preserving the gas components in the sample gas.
Maximum operating temperature 2000℃ Semi-automatic control Ultra-high temperature experimental furnace (carbon furnace, tungsten metal furnace) Compact and space-saving experimental furnace
◉ Maximum operating temperature Max2000℃ ◉ Customizable heater structure: - Cylindrical heater: for sintering samples inside a crucible (for solid, powder, granule, and pellet-shaped samples) - Flat heater: for sintering Φ1" to Φ6" wafers and small chip samples ◉ PLC semi-auto control All operations except temperature adjustment are performed via a touch panel screen. No need for cumbersome valve opening/closing or pump activation; the "vacuum/purge" cycle before sintering and "vent" after sintering are automatically sequenced with one button. ◉ Up to 3 MFCs for automatic flow control (or manual adjustment) ◉ APC automatic pressure control ◉ Ensuring safety during operation Monitoring for cooling water abnormalities, chamber temperature abnormalities, and overpressure abnormalities. Made of SUS, the robust water-cooled chamber can be safely used even during continuous operation at maximum temperature. ◉ Compact and space-saving Width 603 x Depth 603 x Height 1,160mm (*installed inside rotary pump housing) Various sample heating experiments, such as ultra-high temperature heating of small samples in laboratories and new material research and development, can be easily conducted. The main unit is compact yet can be used for research and development in various fields.
Max 1000℃, MFC maximum 3 systems, APC pressure control, compatible with 4" or 6" substrates, high vacuum annealing equipment (<5 × 10^-7 mbar)
High-temperature processing up to 1000°C is possible with the heating stage installed in the high vacuum water-cooled SUS chamber. A heat shield is installed inside the chamber to ensure safety through interlock. The mass flow controller can be expanded to a maximum of three systems, allowing for firing operations at precisely adjusted process gas pressures (with the APC automatic process control system option). Additionally, there are many options available, including a front view port, dry scroll pump, special substrate holder, and additional thermocouples. The heating stage inside the chamber has three variations depending on the process gas atmosphere and treatment temperature: - Halogen lamp heater: Max 500°C - C/C composite heater: Max 1000°C (only in vacuum or inert gas) - SiC coating heater: Max 1000°C (in vacuum, inert gas, O2)
Maximum operating temperature 2000℃ Semi-automatic control Ultra-high temperature experimental furnace (carbon furnace, tungsten metal furnace) Compact and space-saving experimental furnace
◉ Maximum operating temperature Max2000℃ ◉ Customizable heater structure: - Cylindrical heater: for sintering samples inside a crucible (for solid, powder, granule, and pellet-shaped samples) - Flat heater: for sintering Φ1" to Φ6" wafers and small chip samples ◉ PLC semi-auto control All operations except for temperature adjustment are performed on a touch panel screen. No need for cumbersome valve opening/closing or pump activation; the "vacuum/purge" cycle before sintering and "vent" after sintering are automatically sequenced with one button. ◉ Up to 3 MFCs for automatic flow control (or manual adjustment) ◉ APC automatic pressure control ◉ Ensuring safety during operation Monitoring for cooling water abnormalities, chamber temperature abnormalities, and overpressure abnormalities. Made of SUS, the robust water-cooled chamber can be safely used even during continuous operation at maximum temperature. ◉ Compact and space-saving Width 603 x Depth 603 x Height 1,160mm (*installed inside rotary pump housing) Various sample heating experiments, such as ultra-high temperature heating of small samples in laboratories and new material research and development, can be easily conducted. The main unit is compact yet suitable for research and development in a wide range of fields.
Various vacuum furnaces tailored for different applications, ranging from parts and cutting tools for the aerospace and automotive industries, molds, and medical devices such as implants, to those for research institutions.
The OSG Group's Sanwa Seiki offers options for BMI's "Vacuum Heat Treatment Furnace" according to the type of furnace. In addition to standard heat treatment, it is also capable of performing "special treatments" such as low-pressure carburizing and low-pressure nitriding. 【Options List】 All of BMI's high-temperature furnaces can be equipped with low-pressure carburizing (ALLCARB) as an option. The low-pressure vacuum furnace (tempering furnace) B5_R series offers an option for low-pressure nitriding. It uses a reduced-pressure ammonia-based nitriding atmosphere, allowing for stable nitriding treatment in a short time. Furthermore, with the ultra-low temperature treatment (COOL PLUS) option, it reduces residual austenite and stabilizes the parts both mechanically and dimensionally. *For more details, please download the PDF or feel free to contact us.
The biggest feature is the cooling system. With its unique "full surround cooling system," it achieves a reduction in thermal processing distortion! Additionally, there are options for low-pressure carburizing and low-pressure nitriding treatments.
The "full-circle cooling system" is a system that spins a drum equipped with a rotating mechanism while introducing cooling gas, allowing for uniform cooling within the furnace. For more details, please refer to the related video below. The option for low-pressure carburizing (ALLCARB process) set for all high-temperature furnaces is an innovative process that uses unsaturated hydrocarbons as carburizing gas, with over 20 years of proven results. It functions effectively even under special conditions, such as carburizing stainless steel and structures with deep holes. The low-pressure nitriding treatment (ALLNIT process) available in the low-temperature heat treatment low-pressure vacuum furnace B5_R series uses a reduced-pressure ammonia-based nitriding atmosphere, achieving stable reproducibility. This nitriding treatment is effective for hot working tools (such as molds, punches, injection nozzles, etc.), cold working tools (such as shears, rotary combs, etc.), and cutting tools, particularly high-speed steel (HSS). Additionally, the low-temperature heat treatment low-pressure vacuum furnace B5_R series also offers an ultra-low temperature treatment option (COOL PLUS), which is effective in reducing residual austenite and stabilizing components.
The biggest feature is the cooling system. With its unique "full surround cooling system," it achieves a reduction in thermal processing distortion!
The "full-circle cooling system" is a system that spins a drum equipped with a rotating mechanism while introducing cooling gas, allowing for uniform cooling within the furnace. By achieving uniform cooling within the furnace, it enables stable heat treatment even for large components that were difficult to quench in conventional vacuum furnaces, reducing variations in different areas. For more details, please see the related video below.
【Up to 70% reduction in output】 Achieves uniform heating and stationary heating! With a clean environment, dust and foreign matter contamination is difficult, making it effective for small sensors. *Case studies available.
The stack furnace handled by Kyushu Nichisho is an effective heating method for lead frames, substrates after electronic component mounting, and small sensors mounted on transport carriers. (There are also proven results with ECUs and 600×600 size films.) By implementing inline processing, productivity efficiency is increased, and stable heating operation for 24 hours is possible. Additionally, it can accommodate a wide variety of industries, not only in the semiconductor and electronic component sectors but also in the automotive and food industries. The small volume of the heating chamber contributes to energy savings. 【Features】 ■ Supports inline processing with front and rear devices due to a wide variety of configurations ■ Achieves long-term stable reproducibility of temperature control ■ Reduces dust and vibration through stationary heating, improving product quality ■ Significantly reduces the installation floor space in factories by transitioning from 2D to 3D ■ Contributes to energy savings by greatly reducing the volume of the heating chamber *For more details, please refer to the external link page or feel free to contact us.
![[Melting Furnace Case] In-house production of test specimens and test pieces.](https://image.mono.ipros.com/public/product/image/36f/2001301066/IPROS52755591707923263160.jpeg?w=280&h=280)
A melting furnace that can cast various shapes such as fracture test pieces, tensile test pieces, impact test pieces, luminescent spectroscopic test pieces, and other test pieces all in one machine.
The melting furnace for test specimens melts metals using induction (high-frequency induction heating) and then pours them into carbon molds, copper molds, or iron molds to shape them. By simply changing the molds, it is possible to produce test specimens of various shapes. It is also possible to manufacture from the chips generated during machining. All metals that can be melted using high-frequency induction heating or arc melting, such as iron-based and non-ferrous alloys, are included. Additional optional mechanisms can be installed according to the characteristics of other metals: - Vacuum pressurization during melting and pouring - Mold rotation - Inert gas replacement - Stirring in a vacuum - Addition of elements in a vacuum - Cooling mechanisms for molds - Arc melting 【Other Features】 - No need for large-scale capital investment: The compact size with caster mobility allows for use with only wiring and piping installation. - Flexible customization: We will conduct hearings regarding your desired metals, melting quantities, operations, and safety mechanisms, and propose appropriate equipment. We have many successful cases of custom machines, so please feel free to contact us. - Comprehensive after-sales support: We provide not only machine maintenance but also technical support in a partnership model after installation.
A heat treatment furnace that achieves high-precision distribution not obtainable with an electric furnace.
Ideal for firing at high temperatures and heat resistance testing! Capable of operating at up to 750°C and continuously at 700°C. The adoption of hot air circulation achieves a high-precision temperature distribution that cannot be obtained with electric furnaces.
A heat treatment furnace that achieves high-precision distribution not attainable with an electric furnace.
Ideal for high-temperature firing and heat resistance testing! Capable of operating at up to 750°C and continuously at 700°C. The adoption of hot air circulation achieves a high-precision temperature distribution that cannot be obtained with electric furnaces.
Examples of OEM, ODM, and contract manufacturing achievements for annealing furnaces.
Since its establishment, the company has developed and manufactured various devices such as refining machines, continuous weight reduction processing machines, and dyeing machines as a textile machinery manufacturer. In recent years, we have utilized the core technologies cultivated in textile machinery, including dyeing, cleaning, drying, and coating, along with manufacturing technologies for high-pressure vessels, vacuum vessels, and stirring tanks, to engage in small-batch production of diverse products. Moving forward, we will continue to respond to the needs of the times and our customers as a proposal-oriented company. 【Examples of Manufacturing Achievements】 Machine Speed: Regular use 40–120m/min Machine Composition: Furnace body, heating device, circulation fan, blow nozzle, fan heater storage chamber, furnace body front insulation opening and closing device
Solving common issues when requesting heat treatment! A handbook featuring case studies is available for free!
At Chuo Thermal Treatment Research Institute Co., Ltd., we solve problems related to "carburizing quenching," such as "there are few conditions for carburizing quenching" and "the price is high..." We are currently offering a handbook that includes common issues encountered when requesting heat treatment and examples of solutions, free of charge! This is a must-see for those in the parts manufacturing field or engineers who outsource heat treatment. 【Do you have any of these problems? (Some examples)】 ■ We are pressing SK85 plates and quenching them, but we want to improve the efficiency of the pressing process and reduce material costs... ■ We want to stand out even if the hardness of our carburizing quenching is the same as other companies... ■ After quenching and tempering S45C, we want to change the material from high-frequency quenching to S25C-S35C... *Please download the PDF document to see the solutions.
Solve common issues when requesting heat treatment! A handbook featuring case studies is available for free!
At Chuoen Heat Treatment Research Institute Co., Ltd., we solve problems such as "the production volume of parts requiring vacuum heat treatment has increased, but heat treatment costs have not decreased..." We are currently offering a handbook for free that includes common issues faced when requesting heat treatment and examples of solutions! This is a must-see for those in the parts manufacturing field or engineers who outsource heat treatment. 【Do you have any of these concerns?】 ■ SKD11 requires vacuum hardening... ■ Standards for hardening stainless steel SUS420J2 with hardness HRC40-50... ■ The production volume of parts requiring vacuum heat treatment has increased, but heat treatment costs have not decreased... *Please download the PDF document to view the solutions.
Solving common issues when requesting heat treatment! A handbook featuring case studies is available for free!
At Chuo Thermal Treatment Research Institute Co., Ltd., we solve problems related to "inspection and microstructure observation," such as "microstructure observation takes about a week to complete..." We are currently offering a handbook for free that includes common issues encountered when requesting heat treatment and examples of solutions! This is a must-see for those in parts manufacturing and engineers who outsource heat treatment. 【Do you have any of these concerns?】 ■ Microstructure observation takes about a week to complete... ■ It's not heat treatment (like drying), but heat treatment manufacturers won't handle it... *Please download the PDF document to view the solutions.
