We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Heater.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Heater(heat) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.

Heater Product List

1～30 item / All 118 items

Displayed results
[Information] Reasons why CROSS HEAT is chosen

[Information] Reasons why CROSS HEAT is chosen

Comfortable warmth, low defect rate, low cost! Achieving China production with Japan quality.

This document introduces the reasons why CROSS HEAT is chosen. It includes the 12-year history of the development of CROSS HEAT carbon fiber heaters and the reasons for choosing carbon fiber. We will challenge new fields that require heating systems, such as fashion, uniforms, rehabilitation, nursing care, and disaster prevention, alongside the evolution of IT technology and batteries. 【Contents】 ■ 12-year history of the development of CROSS HEAT carbon fiber heaters ■ Reasons for choosing CROSS HEAT carbon fiber ■ Reasons why CROSS HEAT is safe ■ Reasons why CROSS HEAT is reliable ■ Evolution of CROSS HEAT *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters
  • fiber
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Introduction of Case Studies] Examples of Outdoor Waterproof Heating Devices in [Residential Exteriors]

[Introduction of Case Studies] Examples of Outdoor Waterproof Heating Devices in [Residential Exteriors]

In the current situation where the number of new housing starts is decreasing, our outdoor heaters are attracting attention as a new added value from construction companies and others.

The introduction of outdoor heaters for residential use is becoming a market trend, and inquiries from construction companies and exterior manufacturers regarding this new product are increasing. There are some cases where it has been specified as equipment in sky lounges of luxury homes.

  • Other air conditioning equipment
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Chrester Outdoor Waterproof Infrared Heater (Mid-Range)

Chrester Outdoor Waterproof Infrared Heater (Mid-Range)

Fully waterproof electric infrared heater suitable for outdoor installation.

The "Infrared Heater" we offer is a product from Chrester, aimed at providing "the ultimate comfortable space." With its high design quality, it can provide comfortable heating in just a few seconds while maintaining a stylish environment. It can also be used in terrace seating, which is an effective customer attraction tool, increasing usage frequency in winter and making it a more appealing tool for attracting customers. 【Features】 - Sophisticated design that matches any environment - Fully waterproof type suitable for outdoor installation - 100V outlet specification that can be installed anywhere (excluding 200V models) The "Pegasus Series" and "Fairy Series" introduced on this page are available in two types to suit your environment: - Wall and ceiling mounted models - Stand installation models *For more details, please download the PDF or feel free to contact us.

  • air conditioning
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Introduction of Case Studies] Introduction case of outdoor waterproof heating equipment in [Outdoor Medical Settings]

[Introduction of Case Studies] Introduction case of outdoor waterproof heating equipment in [Outdoor Medical Settings]

Due to the impact of the recent COVID-19 pandemic, the use of Chrester heaters in outdoor medical settings has been rapidly increasing.

In places like pharmacies and clinics, the entrances and exits are being kept open for ventilation, and here too, the Chrester heater is proving to be useful.

  • Other air conditioning equipment
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat-resistant hot air heater 200°C

Heat-resistant hot air heater 200°C

Gas can be heated in an environment of 200℃.

Gas can be heated in an environment of 200℃. It can discharge high-temperature air up to 1000℃. With internal or external threads at the tip, various fittings can be attached. Using a thermocouple at the outlet, precise temperature control can be achieved. With additional specifications, the heating element temperature can be monitored, allowing for safety measures against overheating. Heating elements ranging from 50w to 6.3kW have been incorporated into four types of metal tube cases: φ13, φ19, φ22, and φ28.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HEAT SIGNAL Series

HEAT SIGNAL Series

The new generation heater features a signal lamp that clearly indicates the power status and any malfunctions, and with MIRUMO, you can "see and know" the liquid temperature, enabling "visual management."

The "next-generation products" of intrinsically safe design combine safety support devices and safety modules for "seeing, knowing, monitoring, and blocking," allowing for the detection of dangers caused by human error (such as dry cooking, abnormal liquid levels, overheating, etc.) and anomalies. This enables the ECS system/MS Board to automatically stop liquid heating operations, thus managing liquid heating safely. The Heat Signal series is a "visual management" safety module of the ECSMS management system.

  • Other surface treatment equipment
  • Other semiconductor manufacturing equipment
  • Heating device
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vacuum-compatible hot air heater

Vacuum-compatible hot air heater

Challenging the limits of hot air heaters, we have made it possible to achieve vacuum extraction, which was previously impossible.

The main purpose of using high-temperature inert gas in a vacuum chamber is to perform uniform and efficient heating and cooling while preventing oxidation and degradation of materials. By filling the chamber with inert gases such as nitrogen or argon, it becomes possible to process precision parts and electronic materials that cannot undergo heat treatment in the atmosphere. Main purposes of using high-temperature inert gas: Prevention of oxidation and contamination By circulating inert gas in a space free of oxygen and moisture, oxidation and discoloration of metals and semiconductor materials at high temperatures can be completely prevented. Promotion of heat treatment and baking (degasification) By introducing or exhausting inert gas while heating the chamber, gas molecules (such as moisture) that are adsorbed on the surface or inside the material can be efficiently expelled. Uniform heating and cooling through heat transfer In a vacuum, heat transfer is limited to radiation and conduction, but by circulating high-temperature gas, even complex-shaped workpieces can be heated and cooled uniformly without unevenness.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Environmentally resistant double-glass tube type hot air heater

Environmentally resistant double-glass tube type hot air heater

Heat Wind Heater Environmentally Resistant Type DGH Series - Heating gases with flexible temperature control.

Features ◎ Since the heating element, thermocouple, and electric wires do not come into direct contact with the heated fluid, it can be used for heating steam and some corrosive gases. ◎ This heater eliminates dust and gas emissions to the greatest extent possible. ○ The heating element and thermocouple are sealed inside the inner quartz tube. The gas is indirectly heated by passing through the gap between the inner and outer quartz tubes. △ It is very tough compared to regular heaters, but the limits of the metal case (made of stainless steel), quartz glass, and heat-resistant rubber will depend on the usage conditions. × It is not suitable for heating fluids that contain substances that tend to remain inside the heater. ◆ Discharges high-temperature hot air at 500℃ in a short time. ◆ Equipped with a thermocouple at the hot air discharge section, allowing for easy temperature management. ◆ Can directly heat nitrogen, making it suitable for experiments with anaerobic microorganisms. ◆ Simply supply air and electrically heat it for discharge; it is safe and clean as there are no flames. ◆ The capacity of the hot air heater can be manufactured in a wide range from 100W to 12kW. ◆ The outer diameter ranges from φ13 to 140mm, and the heater section is compact.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hose-shaped heater "HEAT HOSE"

Hose-shaped heater "HEAT HOSE"

Flexible custom-made hose heater

The heat hose is a hose-shaped heater that is amorphous in all aspects except for its hose-shaped heating section. It is suitable for situations where you want to prevent the temperature drop of the transported fluid, particularly for maintaining the insulation of lines that require durability against sliding and severe uniform heat distribution. We can customize it according to the required conditions such as the material, diameter, length, and connection shape of the flow path, as well as temperature range and pressure. 【Features】 ■ Uniform heat distribution ■ Durability *For more details, please download the PDF or feel free to contact us.

  • hose
  • Contract manufacturing
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electric heater "F Heater"

Electric heater "F Heater"

Compared to other electric heaters, it does not overheat, making it safe and energy-efficient.

The "F Heater" is a self-temperature-controlled electric heater that can adjust its power consumption according to the surrounding environmental temperature. This product has been developed utilizing the extensive technology and experience in conductive polymers cultivated through years of cable manufacturing. Please feel free to contact us if you have any inquiries. 【Main Features】 ■ Excellent safety and energy efficiency due to self-temperature control ■ Usable at any desired length ■ Easy installation ■ Maintenance-free ■ Can be overlapped ■ Highly durable *For more details, please download the PDF or feel free to contact us.

  • Other heaters
  • Heating device
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Standard hot air heater

Standard hot air heater

Hot air heater: Heats gas to high temperatures with precise temperature control, and since it is non-contact, it is hygienic.

Features of the hot air heater: Discharges high-temperature hot air of about 900°C in a short time. Equipped with a thermocouple at the hot air discharge section for easy temperature management. Can directly heat nitrogen, making it suitable for experiments with anaerobic microorganisms. Simply supplies air and electrically heats it for discharge; it is safe and clean as there is no flame. Nozzles are provided to match the shape and installation of the heated object. The capacity of the hot air heater has a production record ranging from 30W to 70kW. Outer diameter ranges from φ4 to 140mm, with an ultra-compact heating section. *Custom specifications can be manufactured if feasible.

  • Heating device
  • Heater
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Far Infrared Point Heater FPH-60

Far Infrared Point Heater FPH-60

By adjusting the temperature of the heating element, it is possible to manage the peak frequency of far-infrared radiation.

Features of FPH-60 1) Medium-sized. Diameter Φ60mm x Height 75mm. Can be installed in machine gaps. The focal diameter is a minimum of φ10mm. 2) Clean. Non-contact heating with no medium allows for ultra-clean heating. 3) Stable radiation characteristics. 4) Quick rise time, which shortens heating time. 5) Frequency management of the heating element is possible. By adjusting the temperature of the heating element, the peak frequency of far-infrared radiation can be managed.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Halogen Line Heater HLH Series Catalog

Halogen Line Heater HLH Series Catalog

Since it uses light for non-contact heating, it enables complete clean heating and heating in a vacuum!

This document is a comprehensive catalog introducing the halogen line heater "HLH Series." It includes examples of applications such as moisture control in the papermaking process and drying of chemicals, as well as an overview of the products, basic structure, and a list of model configurations. Additionally, it presents specifications and dimensional drawings for various types in the same series, including ultra-compact focusing type, ultra-compact parallel light type, compact parallel light type, ultra-high temperature focusing type, high-performance parallel light type, high-performance focusing type, and high-performance parallel light type. [Contents] ■ Application examples and product introduction ■ Specifications and dimensional drawings ■ Research and development lab kits ■ Heater controllers *For more details, please download the PDF or feel free to contact us.

  • Heater
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Halogen Point Heater HPH Series Catalog

Halogen Point Heater HPH Series Catalog

High-temperature heating, raising temperature to 1000℃ to 1400℃ in just 5 seconds! Instant heating, reduced heating time.

This document is a comprehensive catalog introducing the halogen point heater "HPH Series." It includes various applications such as soldering of printed circuit boards and preheating, an overview of the products, and tables showing infrared absorption rates. Additionally, it presents specifications and dimensional drawings for various types in the series, including ultra-compact, compact, medium, vacuum chamber compatible, ultra-high temperature, large, and high-output models. [Contents] ■ Application examples and product introduction ■ Specifications and dimensional drawings ■ Research and development lab kits ■ Heater controllers *For more details, please download the PDF or feel free to contact us.

  • Heater
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Industrial Carbon Ring Heater CFRH Series

Industrial Carbon Ring Heater CFRH Series

Carbon Ring Heater CFRH for Heat Shrink.

Features of CFRH 1. Omnidirectional irradiation in a circular shape Since it irradiates from all directions in a circular shape, there are no blind spots. 2. Optimal for resin heating Being a carbon fiber heating element derived from polymer compounds, it excels at heating resins. 3. Quick startup Reaches 80% in just 2.7 seconds and 100% in 8.5 seconds. 4. Flexible lighting direction Using a flexible material for the heating element allows for processing into line or ring shapes. The heating element itself is lightweight and can be oriented vertically, horizontally, or diagonally without restriction. Moreover, it also boasts excellent impact resistance.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Finger size halogen point heater

Finger size halogen point heater

Industry's smallest finger size

Features of HPH-12 1) It is ultra-compact and can heat a point of φ1.5 to 750–800°C. The control of heating temperature can be done through irradiation time control or voltage control. The lamp life will be reduced to one-third, but high-frequency flashing operation will decrease the lifespan. Slow ramp-up and ramp-down of voltage can improve lifespan. 2) It achieves perfect clean heating and can also heat in clean rooms or vacuum environments. Note that when placed in a vacuum chamber, there will be some gas release from inorganic adhesives initially, so pre-vacuum treatment is necessary. Additionally, heat dissipation decreases in a vacuum, so a water cooling unit must be installed in the main body. 3) It has made it possible to heat in narrow spaces that could only be addressed by optical fibers or lasers in the past. Compared to fiber optic heating and laser heating methods, it offers overwhelming efficiency of over 10 times, lower cost, energy savings, and safety. 4) There are no restrictions on the direction of lighting, allowing for use while moving. It consists of a high-efficiency condenser lens with a front protective glass and a lamp unit, both of which can be replaced. For continuous lighting, please install the air cooling unit ACU-8.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-contact hot plate Halogen double-sided heater HDSH-60

Non-contact hot plate Halogen double-sided heater HDSH-60

Non-contact hot plate Halogen double-sided heater HDSH-60. It is a hot plate that does not pull threads due to its non-contact design.

Features of the Halogen Double-Sided Heater HDSH-60 1) It can heat both sides with a single heater. A halogen lamp is integrated at the center of the heater, and a reflector is designed to enable heating on both sides. It can be placed between the heating target objects, allowing both sides to be heated with just one heater. This makes it possible to reduce weight and save energy. 2) It can be connected and used with multiple units. Heaters can be lined up in multiple units according to the heating target. 3) The heater's startup time is just a few seconds. Since it uses a halogen lamp as the heating element, the startup time is very fast. 4) It is suitable for heating metals. It emits short wavelengths that are ideal for heating metals, making it perfect for this purpose.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra High Temperature Focusing Halogen Line Heater HLH-45 Series

Ultra High Temperature Focusing Halogen Line Heater HLH-45 Series

Ultra-high temperature concentrated halogen line heater

Features of HLH-45 1) It can be heated linearly up to a maximum of 1580°C. The high-performance halogen line heater HLH-45 is a linear infrared heating device that uses rod-shaped halogen lamps. It has a short heating time and can heat to ultra-high temperatures linearly with a focal distance of 20mm. 2) High output in a compact size It uses a high-output 5kW halogen lamp and has been miniaturized. The height of the focusing lens is 50mm, allowing it to be installed in narrow spaces. 3) Two heaters can be installed facing each other, allowing for heating of the object placed in between.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Medium Halogen Point Heater HPH-50 Series

Medium Halogen Point Heater HPH-50 Series

The φ5mm point can be heated to 1450°C in a short time.

1. The Φ5mm point can be heated to 1450°C in a short time. The HPH-50 is a halogen point heater that concentrates the light from a halogen lamp onto a single point using a focusing lens to achieve high-temperature heating. The temperature varies depending on the infrared absorption rate of the heated object, but it can heat a point with a focal length of 20mm to approximately 1450°C. The method of controlling the heating temperature can be done by controlling the irradiation time or the voltage. By adjusting the voltage to 90%, the lamp life can be tripled. 2. It achieves perfect clean heating and can also heat in clean rooms or under vacuum conditions. 3. It has become possible to heat in narrow spaces that could only be addressed by optical fibers or lasers in the past. Compared to optical fiber heating methods and laser heating methods, it offers overwhelming efficiency that is more than 10 times higher, low cost, energy savings, and safety. 4. There are no restrictions on the direction of illumination, allowing for use while moving. 5. By adopting a water-cooled cooling method, it operates extremely quietly even during operation.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Chrester【Household】 Waterproof Pixie Heater

Chrester【Household】 Waterproof Pixie Heater

This is an easy-to-introduce outdoor waterproof electric infrared heater for home use. It can be mounted on walls or ceilings, and can also be installed using a freestanding stand.

Chrester, a domestic manufacturer of heating and cooling products, offers an infrared heater that can be easily introduced outdoors for your home. By simplifying the specifications, we have created a product that is affordable. You can choose between stand installation and wall/ceiling mounting, and it can be used with a standard 100V power supply, making it easy to introduce. 【Features】 ■ Waterproof design allows for outdoor installation ■ The stand installation type is easy to set up ■ Three height adjustments and tidy cable storage (stand installation type) ■ Compact and lightweight, making wall and ceiling mounting easy (wall/ceiling mounting type) This model is available in two types to suit your environment: 　◆ Wall/Ceiling Mounting Model 　◆ Stand Installation Model *For more details, please download the PDF or feel free to contact us.

  • air conditioning
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-Temperature Halogen Point Heater HPH-100 Series

High-Temperature Halogen Point Heater HPH-100 Series

High-temperature heating of φ10mm point to 1750℃ in a short time.

1) The φ10mm point can be rapidly heated to 1750°C. The HPH-100 is a halogen point heater that focuses the light from a halogen lamp onto a single point using a lens, achieving localized high-temperature heating. The actual temperature may vary depending on the infrared absorption rate of the heated object, but it is capable of heating a φ10mm point to approximately 1750°C at a focal distance of 25mm. The heating temperature can be controlled by the irradiation time or voltage. By operating at 90% of the rated voltage, the lamp life can be extended to about three times. *Frequent on-off operations will shorten the lamp's lifespan. 2) High-precision and safe heating is possible without contact. The halogen point heater uses a non-contact heating method with infrared, allowing energy to be transmitted without directly touching the heated object. This offers the following advantages: ■ Heating can be performed without causing physical damage to fine parts or delicate materials. ■ There is no risk of foreign matter contamination, making it suitable for applications requiring cleanliness, such as in the medical and semiconductor fields. ■ Due to the non-contact nature, there is also a reduced risk of wear or damage to the equipment side, resulting in excellent maintainability.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Chrester Home Bath Heater

Chrester Home Bath Heater

Keep your bath warm and comfortable during winter! This is a bath heater that can be installed in existing bathrooms.

The winter bath is extremely cold and is cited as a cause of heat shock. In recent new homes, dryers equipped with heating functions have been installed, alleviating this problem, but in older homes, there are not many low-cost solutions available, making it one of the winter challenges. Here, Chrester presents a heating device for use in the bathroom, the "Bathroom Heater." Utilizing the waterproof technology developed through the creation of outdoor heating devices, we thoroughly researched and developed this heater for ease of use in the bathroom. We encourage you to try this heater, which helps reduce heat shock. 【Features】 ■ Safe from water and hot water splashes during use ■ Quick heating! Warms up in 1 second ■ Power switch located in two places ■ 6m long power cable ■ Equipped with an automatic shut-off function when high temperatures are detected This model comes in two variations to suit your bathroom environment. Please check the installation position of the bathroom heater and choose the appropriate model. 　◆ Hanging model 　◆ DIY model *For more details, please download the PDF or feel free to contact us.

  • air conditioning
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Chrester Outdoor Waterproof Infrared Heater (Umbrella Type)

Chrester Outdoor Waterproof Infrared Heater (Umbrella Type)

This is an electric infrared heater that covers a wide outdoor area and boasts high heating capacity. Unlike gas-type heaters, it is very easy to handle.

The main body is made of stainless steel, which provides strong resistance to rust, and the creatively designed umbrella-shaped reflector is engineered to maximize the heating efficiency of the heater. Additionally, the device is equipped with a built-in tilt sensor that automatically turns off the power in the event of a fall, ensuring safe use. We recommend securing it with anchors, but if anchoring is difficult, it can also be fixed without anchors using an optional auxiliary fixing plate. *The power supply for this product is single-phase 200V. Please arrange for electrical work as needed. 【Features】 ■ Waterproof design suitable for outdoor installation ■ Automatic power off and recovery function in case of a fall *For more details, please download the PDF or feel free to contact us.

  • air conditioning
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High Power Halogen Point Heater HPH-160 Series

High Power Halogen Point Heater HPH-160 Series

You can heat the φ24mm point up to 1700℃.

1) The φ24mm point can be heated up to 1700°C. The HPH-160 is a halogen point heater that concentrates the light of a halogen lamp to achieve high-temperature heating. The focal diameter is approximately φ24mm at a focal distance of 40mm, and depending on the heating target, it can be heated to about 1700°C. The time required for soldering is approximately 5 seconds. The heating temperature varies depending on the type of heating target. Temperature control is achieved through irradiation time control or voltage control. *Frequent blinking operation reduces lifespan. Slow ramp-up and ramp-down of voltage can improve lifespan. 2) It achieves perfect clean heating, and heating in clean rooms or vacuum environments is also possible. *When placed in a vacuum chamber, there may be some gas release from the inorganic adhesive initially, so pre-vacuum treatment is necessary. Additionally, since heat dissipation decreases in a vacuum, it is necessary to install a water cooling unit on the main unit. 3) It has become possible to heat narrow spaces that could only be addressed by optical fibers or lasers in the past. Compared to fiber optic heating methods and laser heating methods, it offers overwhelming efficiency of more than 10 times, low cost, energy savings, and safety.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Halogen Glass Rod Heater HGRH-70

Halogen Glass Rod Heater HGRH-70

Heating inside a vacuum chamber is possible.

Features of HGRH-70 1) It can heat with pinpoint accuracy. The HGRH-70 is a heater that concentrates the light from a halogen lamp onto a glass rod, achieving high-temperature heating. It can raise the temperature at the tip of the glass rod to a maximum of 890°C. 2) It can directly heat liquids by being immersed. The glass rod is made of quartz glass, which has excellent acid resistance, allowing it to be immersed in and heat liquids such as chemical solutions and seawater. Additionally, by controlling the temperature, it can accommodate heating in liquids using quartz glass containers instead of polypropylene resin containers.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Peripheral Heating Halogen Ring Heater HRH Series

Peripheral Heating Halogen Ring Heater HRH Series

For heat shrink of wire harnesses, use the Halogen Ring Heater HRH Series.

1. Easy heating, high temperature with the hood! The conversion efficiency from electricity to radiant energy is high, and within the halogen lamp hood, it can reach high temperatures of 650°C. 2. Instant heating, reduction of heating time. HRH transmits a large amount of heat at the speed of light, allowing for miniaturization of the equipment and shortening of heating time. Previously, idling took 30 minutes, but this can be reduced to zero. There is no time lag in heating, eliminating wasted waiting time. Since the temperature rises quickly, the power can be turned off during idle times. This saves energy and reduces electricity costs. The electricity usage cost is calculated as 2kw x 0.5h x 12.16 = 12.16 yen per day. Over a year (operating 250 days), this results in a cost reduction of 3040 yen. Additionally, the annual CO2 emissions are reduced by 100 kg! *The electricity usage cost unit is calculated at 12.16 yen/kWh. *The CO2 emission factor is calculated at 0.4 kg-CO2/kWh. 3. Heating through glass is possible. Quartz glass has almost no absorption in the visible light and near-infrared range, with a transmittance of 93%. There is only 7% reflection. Heating operations can be performed even in a vacuum or inert gas atmosphere through the glass.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Halogen glass rod heater

Halogen glass rod heater

Ultimate Point Heating Halogen Glass Rod Heater

Features 1) It can heat precisely. The HGRH-45 is a heater that concentrates the light of a halogen lamp onto a glass rod, achieving high-temperature heating. It can raise the temperature at the tip of the glass rod to a maximum of 700°C. By concentrating the light on the glass rod, it prevents the diffusion of infrared radiation, making it less likely to affect the surrounding area with heat. 2) It can directly heat liquids by inserting it into the liquid. The glass rod is made of quartz glass, which has excellent acid resistance, allowing it to be inserted into and heat liquids such as chemical solutions and seawater. Additionally, by controlling the temperature, it can accommodate heating in liquids using quartz glass containers instead of polypropylene resin containers. 3) It can heat in narrow and distant spaces. As light travels further away, it diminishes, and heating efficiency decreases. As long as the diameter of the glass rod is secured, high-temperature heating is possible even in narrow or distant spaces. 4) It can serve dual purposes; by splitting the focusing lens, it can be used as a regular halogen point heater.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Chrester [Design Information] Installation Guidelines for Bath Heaters

Chrester [Design Information] Installation Guidelines for Bath Heaters

I will explain the installation guidelines for the bath heater and the heating range.

◆Heating Effect Range Please refer to the diagram below. ◆Required Clearance A clearance of approximately 0.3m or more is required in the front and sides, so please be cautious. *Do not use this heater to dry laundry or similar items under any circumstances. ◆Power Supply Conditions It can be used with a standard 2-pin 100V power outlet. *Please ensure that the grounding wire is properly grounded.

  • Other air conditioning equipment
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Heater

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.