We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Hopper.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Hopper Product List and Ranking from 44 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

Hopper Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

  1. MONOVATE(旧：日東金属工業) 八潮工場 Saitama//Industrial Machinery
  2. 東光エンジニアリング Kanagawa//Industrial Machinery
  3. SHOWA KOKI CO.,LTD Aichi//Building materials, supplies and fixtures
  4. 4 Volkmann Japan Tokyo//Industrial Machinery
  5. 5 ミナギ Osaka//Industrial Machinery
Go to Company Ranking

Hopper Product ranking

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

  1. Mobile Hopper for Loading onto Conveyors SHOWA KOKI CO.,LTD
  2. A stainless steel hopper that is resistant to powder adhesion and less prone to bridging. MONOVATE(旧：日東金属工業) 八潮工場
  3. Ideal for resolving powder clogs and rat holes! New air aeration hopper. Volkmann Japan
  4. TH Vibrating Hopper (Stocker) 東光エンジニアリング
  5. 4 Resolve hopper powder clogging | Aeration hopper MONOVATE(旧：日東金属工業) 八潮工場

Hopper Product List

136～150 item / All 155 items

Displayed results
Delivery to the manufacturer of fuel cell materials.

Delivery to the manufacturer of fuel cell materials.

If it's related to batteries, we have a proven track record of many applications in secondary batteries as well!

This is an inquiry we received from a customer regarding the use of a Brodie disk as a bridge measure for fuel cell-related components. We did not receive any information about the raw materials, but we were informed only about the overview of the hopper, and after providing general layout information, it was decided to proceed with the introduction. Since we had no other information, we checked the situation after a while following the product delivery and received a response that it was "being used without any issues." 【Hopper Overview】 ■ Conical hopper (diameter less than 1000φ) * For more details, please refer to the PDF materials or feel free to contact us. * Our website features numerous case studies. You can check them out via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0402 First, visit our company for your loan request (resin recycled material).

0402 First, visit our company for your loan request (resin recycled material).

Frequent bridge failures occur, so I want to resolve this as soon as possible! Case study of Brodisk Mini adoption.

This is a case we received a call about from a company in Osaka that is engaged in plastic molding. Despite having a very tight deadline for a large order of a new product, they expressed a desire to resolve frequent bridging issues as soon as possible. They brought a sample of the material that was bridging, and upon inspection, it was a type of material we are quite familiar with, so we had no particular concerns. We guided them on the placement of the blow disc and provided the necessary quantity on the spot. We received a report that it was installed the same day and the results were good, and at the same time, they placed an order for the equipment and controller. [Overview] ■ Hopper Overview: Suction transport hopper approximately 200φ ■ Target Material: Plastic recycled material (pellets + powder... with a relatively high amount of powder) * For more details, please refer to the PDF document or feel free to contact us. * Our website features numerous case studies. You can check them out via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0406 Elimination of residual silica-based powder

0406 Elimination of residual silica-based powder

This is an introduction to a case that was implemented due to an incident where the processed material remained on the R surface of the rounded hopper.

To our customers engaged in plant engineering, we have introduced this equipment due to an incident in a past plant where residual material was left on the rounded corners of the hopper. The customer selected the model and planned the layout, and ultimately contacted us to confirm if there were any issues. The model and layout were ideal, and we provided advice on the operating methods, leading to its adoption. 【Overview】 ■ Hopper: 1800×1800 (Bottom: 800φ) ■ Material: Silica-based powder (Bulk density 0.1, Angle of repose 45°) ■ Operating method: Controlled by a built-in controller with 4 solenoid valves, activating 8 blow discs in pairs * For more details, please refer to the PDF document or feel free to contact us. * Our website features numerous case studies. You can check them out via the link below.

  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Measures for the dust collector hopper for the grinding machine.

Measures for the dust collector hopper for the grinding machine.

After actually seeing it, you judged, "This should work." We have implemented it.

This is a case in which we received an inquiry to resolve the bridging occurring in the hopper section of a dust collector. The customer sent us the equipment drawings and a sample of the material, so we started by providing a layout proposal for the blow disk based on that. We informed them that there were no significant risks observed with the powder sample we reviewed. The person in charge contacted us expressing a desire to see the actual blow disk, so we set it up on a plate that simulated the hopper wall and sent it to them. The customer connected air to it and observed the air injection and vibration of the blow disk, concluding that "this should work." They decided to proceed with the installation. The results, of course, have been favorable. [Overview] ■ Hopper upper dimensions: approximately 4000×2000 ■ Hopper bottom dimensions: approximately 3000×300 ■ Material: calcium silicate polishing powder (bulk density approximately 0.3) * For more details, please refer to the PDF document or feel free to contact us. * Our website features numerous case studies. You can check them out via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0457 Poor flow of thermoplastic resin powder

0457 Poor flow of thermoplastic resin powder

Proposal for immediate countermeasures! Introduction of a case requested by a representative from a major trading company.

This is an introduction to a case requested by a representative from a major trading company. Due to a change in the target material (raw material), the powder discharge from the storage hopper has become unstable, and we were asked to implement measures immediately. After hearing about the current situation and the specifications of the equipment, we provided a proposal for immediate countermeasures on the same day. All the recommended equipment is in stock, allowing for immediate delivery. [Case Overview] ■ User: Automotive parts industry ■ Target Equipment: Extruder (raw material storage hopper) ■ Hopper: Diameter 500φ, discharge 125A, hopper incline 45° ■ Discharge Device: Slide gate valve (adjustable opening) ■ Target Powder: Thermoplastic resin powder *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous case studies. You can check them out via the link below.

  • Other processing machines
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0482 Pharmaceutical raw material hopper

0482 Pharmaceutical raw material hopper

Testing conducted by the customer using our standard model! Introduction of an example adopted by a certain pharmaceutical company.

We received a consultation from a certain pharmaceutical company regarding the occurrence of bridging in the pharmaceutical raw material hopper, and they would like to address this issue with aeration using our equipment. After disclosing the hopper drawings and powder properties, we provided an example of the equipment layout. The customer conducted tests using our standard model (with product loaned) and confirmed its effectiveness. Subsequently, there were requests for special specifications, and after detailed discussions, we finalized the specifications and proceeded with production and delivery. Our company also accepts inquiries for special specifications, including various materials. Please feel free to consult us. 【Installation Overview】 ■ Target Material: Pharmaceutical Raw Material ■ Hopper Diameter: φ400 ■ Discharge Diameter: 3S ■ Number of Units: 3 Brody Disk Minis installed in 2 tiers (total of 6 units) *For more details, please refer to the PDF document or feel free to contact us.

  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0478 Small hopper, with fine powdered wheat flour

0478 Small hopper, with fine powdered wheat flour

We assist our customers with selecting models and planning layouts according to their requirements!

We received contact from a customer who has experience using our Broa Disk. They experienced a bridge in the hopper for fine flour, so they installed two of their available Mini Broa Disks. While there was some effect, it did not completely resolve the issue, and they inquired about the possibility of adding a few more units. They requested a loan of the additional units. It was noted that two units were already installed near the discharge area (which is an ideal position), and based on the situation during testing, we determined that it would be best to install four units directly above the existing ones and sent the necessary quantity. The customer conducted a test, and the results were favorable, leading to their adoption of the solution. [Case Summary] ■ Subject: Flour... finer than usual (similar to matcha) ■ Hopper: Diameter 350φ / Discharge 3S *For more details, please refer to the PDF document or feel free to contact us.

  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0484 Green tea powder: at the suction hopper

0484 Green tea powder: at the suction hopper

The loan of the equipment sample has been approved after obtaining the consent of the end user!

There have been ongoing issues with bridging in equipment for major beverage manufacturers, and we received inquiries from businesses engaged in the design and manufacturing of machinery. First, after reviewing the drawings of the target hopper, we proceeded with 1) guidance on the model and layout, 2) lending equipment samples, and 3) obtaining approval from the end user (the beverage manufacturer), leading to our adoption. After delivery, this equipment has received very positive feedback, resulting in numerous repeat adoptions. 【Case Overview】 ■ Target Material: Green Tea Powder ■ Target Hopper: Suction Hopper ■ Hopper Diameter: φ600 ■ Discharge Diameter: 2S 【Key Points of Our Equipment】 ■ The elastic disk (silicone) is crucial in terms of the risk of foreign material contamination, so strength and durability are very important. The silicone disk in our equipment excels in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is important! We provide guidance on what should be done. We also have a dedicated controller available. *For more details, please refer to the PDF materials or feel free to contact us.

  • Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Installed on the hopper with internal fluororesin coating.

Installed on the hopper with internal fluororesin coating.

Measures against rat holes! Introducing a case of fluororesin coating and the installation of a brodie disk.

Here is a case study of our engineering company being adopted. According to the customer, there was initially a concern about rat holes in the project, and although a fluororesin coating was applied as a countermeasure, the results were not satisfactory. This time, they wanted to address the issue by installing a fluororesin coating along with a blow disk for the expansion of similar equipment. After delivery, we confirmed that the results were evaluated positively. [Case Overview (Partial)] ■ Hopper - Weighing tank - Diameter φ2000 - Discharge diameter φ300 ■ Gas used: Nitrogen ■ Temperature: Room temperature [Key Points of Our Equipment] ■ The elastic disk (silicone) is very important in terms of strength and durability due to the risk of foreign matter contamination. The silicone disk of our equipment is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller available. *For more details, please refer to the PDF document or feel free to contact us.

  • Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0517 φ600 (discharge section φ50) for air transport hopper

0517 φ600 (discharge section φ50) for air transport hopper

Installed two standard Brodisks and two Brodisk Minis! A case where the clogging was resolved.

We would like to introduce a case where we addressed a blockage at the bottom of an air transport hopper in a cosmetics raw material factory. The flowability of the raw material was not significantly poor, but the small diameter of the hopper discharge section, φ50, seemed to be the main cause of the blockage. To resolve this, we installed two standard blow discs slightly below the center of the hopper and two mini blow discs near the discharge section. As a result, the blockage was eliminated. 【Case Overview】 ■ Hopper Diameter: φ600 ■ Discharge Diameter: φ50 (air transport from the discharge section) ■ Hopper Apex Angle: 60° ■ Raw Material: Cosmetics raw material (fine powder) ■ Control: Intermittent operation with a total of four blow discs (mini) with simultaneous air ON/OFF *For more details, please refer to the PDF document or feel free to contact us.

  • Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0539 Used in air transport device hopper (TiO2)

0539 Used in air transport device hopper (TiO2)

Installed in the hopper of the air transport device! Example using the standard type Brody disk (BD-15).

As a measure against titanium dioxide bridging, it has been installed in the hopper of the air transport device. According to user experience, there are no particular issues with the bottom of the hopper, which is equipped with a sintered metal mesh strainer. However, to prevent bridging in the hopper above, a blow disk has been adopted. In this case, the standard blow disk type (BD-15) is being used, but for materials with very poor fluidity, we may recommend a version with a higher air volume (BD-20). 【Product Specifications】 ■ Blow Disk: BD-15S-B x 3 ■ Controller: C-SV1 x 1 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of the risk of foreign matter contamination, as well as strength and durability. The silicone disk of this equipment excels in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF document or feel free to contact us.

  • Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0557 To the hopper of flake-like chemicals

0557 To the hopper of flake-like chemicals

Confirm the effects with a loan! We can provide information on model selection, placement, control examples, etc.

This is a case where we received a consultation stating, "The hopper's slope is very gentle, and we are having trouble discharging the stored material." The user confirmed the effectiveness with the loaned Brody disk, and as a result, it was successfully implemented. During the loan (test use), we assist with model selection and layout planning. Customers interested are encouraged to consult with us. 【Overview】 ■ Hopper diameter: φ1000 ■ Discharge diameter: 150A ■ Slope angle: 40° or less ■ Target material: Flake-shaped chemicals (size = approximately 5-10mm, bulk density = about 0.7) 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability due to the risk of foreign matter contamination. The silicone disk of this equipment is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF materials or feel free to contact us.

  • Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0610 Baking soda hopper / at the incinerator

0610 Baking soda hopper / at the incinerator

Fluidize the powder with air injection along the inner surface of the hopper! The elastic disk offers reliable high durability.

We would like to introduce a case where our products were adopted in conjunction with the modification work of the incineration equipment. It seems that other exhaust gas treatment agents were originally used, but in line with the equipment modifications and changes in chemicals, measures for bridge and rat hole issues were implemented using the Brod disk. With the Brod disk, powder can be fluidized by air injection along the inner surface of the hopper, and it is possible to generate vibrations simultaneously with air aeration. 【Introduction Overview】 ■ Hopper Diameter: Φ2500 ■ Discharge Diameter: Φ250 ■ Target Material: Fine powdered sodium bicarbonate ■ Configuration: 4 Brod disks installed in 3 tiers, totaling 12 disks ■ Control: A controller (C-SV6) with 6 built-in solenoid valves sequentially turns on air for 2 Brod disks at a time with a time delay. *For more details, please refer to the PDF document or feel free to contact us.

  • Mixer/agitator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0638 Solve rat holes with a gentle slope hopper.

0638 Solve rat holes with a gentle slope hopper.

Place the Brody Disk Mini to mitigate the risk of clogging at the discharge port! Introducing a case study on solving rat holes.

We would like to introduce a case that was consulted by a machinery manufacturer who has adopted our equipment multiple times. During the trial operation, the amount of raw material fed into the hopper was about half of its capacity, and there were no issues. However, once actual operation began, rat holes occurred, and they contacted us to implement measures using a blow disk. After reviewing the hopper diagram and powder samples, we provided information on the recommended model and configuration. The results of their adoption have been evaluated as very good. 【Case Overview】 ■ Issue - Rat holes occurred during trial operation ■ Overview of Our Equipment Configuration - Installed 4 standard blow disks - Installed 2 mini blow disks near the discharge area below ◆◆ Key Points of Our Equipment ◆◆ ◎ The elastic disk (silicone disk) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. We believe that the silicone disk of our equipment is exceptionally strong and durable. Once you use it, you will understand! ◎ Although our equipment has a simple structure, control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller prepared.

  • Mixer/agitator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0652 At the pigment hopper (with variety change cleaning)

0652 At the pigment hopper (with variety change cleaning)

Easily solve powder bridging! We will introduce case studies of BroaDisk.

We would like to introduce a case study of the "Brodisk." This equipment was adopted for bridge prevention in a pigment hopper. The user has several product changes each month, and the hopper is washed with water each time. They requested to see whether the Brodisk could be easily attached and detached during this process, so we sent the equipment for their use. 【Case Overview】 ■ Target Material: Pigment + Dispersant (fine powder: several μm) ■ Hopper Diameter: Ø300 ■ Discharge Diameter: Ø100 【Key Points of Our Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability to mitigate the risk of foreign material contamination. Our silicone disk is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF document or feel free to contact us.

  • Mixer/agitator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Hopper

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.