Hopper Product List and Ranking from 12 Manufacturers, Suppliers and Companies

Separate Hopper

Standard equipped with level switch and controller! A hopper with a full-fledged storage tank.

The "Separate Hopper" is a hopper equipped with a full-fledged storage tank for automatically supplying a large amount of work over an extended period. It comes in 11 models and is equipped with a level switch and controller as standard to control the operation of the hopper based on the amount of work in the bowl. 【Features】 ■ Hopper equipped with a full-fledged storage tank ■ Available in 11 models ■ Standard equipped with level switch and controller ■ Low noise ■ Stable work discharge *For more details, please refer to the PDF document or feel free to contact us.

Company：NTNテクニカルサービス精機商品事業部
Price：Other

Parts feeder
Other assembly machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Space-saving hopper

Easy maintenance and inspection! Space-saving with stable workpiece discharge.

The "Space-Saving Hopper" is a hopper that particularly emphasizes space efficiency. It is supported by a single round rod between the tank and the chute, allowing it to be positioned directly above bowl feeders and similar equipment. Additionally, it comes with a compact, high-sensitivity level switch. 【Features】 ■ Space-saving ■ Easy maintenance and inspection ■ Stable work discharge ■ Can be positioned directly above bowl feeders and similar equipment ■ Comes with a high-sensitivity level switch *For more details, please refer to the PDF document or feel free to contact us.

Company：NTNテクニカルサービス精機商品事業部
Price：Other

Parts feeder
Other assembly machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Handbook of Key Points for Hopper Design for Mechanical Engineers

Achieving trouble prevention and low-cost design.

The hopper serves the role of temporarily storing raw materials and transporting the appropriate amount. Depending on the nature of the raw materials, it may not be possible to transport them using gravity alone, so it is necessary to add transportation functions to the hopper as needed. Common issues with hoppers include the bridging phenomenon that hinders transportation functions, rat holes and blocking that pose hygiene problems, and raw material leaks due to damage to the hopper or piping. It is the challenge of design engineers to find ways to prevent these issues. In the manufacturing of hoppers, the most important process that determines transportation functionality, stability, and cost is the design phase. Design engineers must understand the entire manufacturing process of hoppers and demonstrate their skills in creating products that excel in both functionality and price. For more details, please contact us or refer to the catalog.

Company：まごの手.com
Price：Other

Technical and Reference Books
Other conveying machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hopper

A hopper that is also ideal for the manufacturing equipment of pharmaceuticals and food.

This hopper is designed for piping with a lid. It has a bottom shape that allows for good liquid drainage. It features a 10% dish-shaped mirror plate with a beading process. It has a 90° conical shape. It is used in pharmaceutical, cosmetic, and chemical manufacturing equipment, as well as in food manufacturing equipment. 【Features】 ■ Material: SUS304 ■ Finish: Internal and external buff #400 ■ Beading process *For more details, please contact us or download the catalog.

Company：サニーテクノ
Price：Other

Piping parts
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hopper 【Food Machinery】

Hopper [Argon welding, stainless sheet metal, clean, food machinery]

【Material】 Stainless Steel SUS304 【Size】 300×200×300(mm) 【Industry】 Food Machinery 【Lot】 Approximately 1 to 20 pieces 【Processing Method】 Argon Welding (Tig Welding) 【Production Period】 About 5 days – *This may vary depending on the situation and quantity, so please contact us first. 【Features】 This is a hopper for the food machinery industry. It is made of stainless steel (SUS304) and processed by argon welding. We offer one-stop processing including laser cutting, bending, welding, finishing (polishing, pickling, HL finishing, blasting, etc.), cleaning, non-destructive testing, and engraving. For products with larger quantities, argon welding with robots is also possible.

Company：岩倉溶接工業所
Price：Other

Food Processing Equipment
Filling and bottling machines
Processing Contract
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Examples of stainless steel polishing, welding, and sheet metal processing: square hopper (TIG welding)

Introducing examples of processing for food machinery and pharmaceutical equipment parts that require high polishing technology!

Here are examples of processing "square hoppers" used in the food and medical industries. High polishing technology is required for machine parts in food machinery and pharmaceutical equipment. The bead cut on the exterior is excellent, and the smooth finish on the interior is outstanding. There is no distortion at the weld points on the four sides and the flange. 【Examples】 ■Industry: Food, Medical ■Material: SUS304, SUS316 ■Processing: Sheet metal, TIG welding, Polishing (#400 and above) *For more details, please refer to the PDF document or feel free to contact us.

Company：羽賀研工業本社
Price：Other

Contract manufacturing
Processing Contract
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Equipment] We meet diverse needs with our extensive facilities!

In-house production facilities to meet customer needs.

<Equipment in the Factory> ■ Shape Steel Laser Cutting Machine Performs small cuttings of complex shapes and hole drilling in shaped steel. ■ Fiber Laser Cutting Machine Cuts plates into specified shapes. ■ Brake Press Machine Bends the corners of sheet materials. ■ Robot Welding Machine Performs fiber laser welding using a robot. ■ Others <Equipment in the Office> ■ Production Management System x6 ■ 2D CAD (AP100) x7 ■ 3D CAD (Sheet Works x5, Solid Works x1, Solid Edge x1) ■ BEND CAM x1 ■ TUBE CAM x1 ■ Robot Welding CAM x1 ■ Others *For more details, please download the PDF or feel free to contact us.

Company：ヒラ・テック
Price：Other

Contract manufacturing
Processing Contract
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hopper

We will manufacture parts based on the drawings from the customer!

We manufacture parts based on drawings provided by our customers, including part drawing development, cutting, bending, welding, and inspection. This is a hopper for use in sanitary piping. *For more details, please feel free to contact us. 【Unique Points of Our Company】 ■ Capable of handling projects with short delivery times ■ Able to manufacture parts with complex shapes ■ Protective tape is applied during part manufacturing to prevent scratches ■ Special diameter (non-standard) pipes can also be bent and manufactured from sheets.

Company：ファイネス
Price：Other

Processing Contract
stainless
Food Processing Equipment
Hopper

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AS3 Hopper

Opens and closes due to the weight of the sprue runner! Helps prevent scattering.

The "AS3 Hopper" is an automatic opening and closing lid that can be retrofitted by customers onto plastic low-speed crushers manufactured by molding peripheral equipment manufacturers. It does not require any driving devices such as electricity or air, and there are no running costs. It is a product with a very low risk of failure. By placing it on the crusher, it helps prevent the scattering of sprues and runners. 【Features】 ■ No power source (electricity/air) required ■ Expected to prevent scattering of sprues and runners during crushing ■ Compatible with attachments to match the size of hopper inlets of various manufacturers' crushers ■ The strength of the shooter (opening and closing slide) can be set as desired *For more details, please refer to the related links or feel free to contact us.

Company：松井製作所プラスコム事業部
Price：Other

Other powder equipment
Hopper

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Is there no wear path on the corner hopper?

When the road reaches its destination, wear tends to concentrate, right? Aren't you replacing it even though the others are still usable?

The reason patches come periodically is that fluid concentrates in the interior depressions. How about repairing only the areas that are depressed or changing the shape and material of the hopper? We can surely solve the concerns of those in charge of equipment, repairs, and maintenance. Please feel free to contact us.

Company：マーテック
Price：Other

silo
Other conveying machines
Other packaging machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Sheet Metal Processing Example] Hopper/Stainless Steel/Small Quantity and Variety

We ensure quality assurance, short delivery times, and cost reduction through consistent manufacturing from material procurement to processing, welding, and painting!

Hopper (right side of the photo) Material: Stainless Steel Dimensions: 600 x 600 x 1,000 mm We specialize in various precision processing techniques such as 3D/2D laser processing and welding, catering to a wide range of customer needs from small and thin sheet metal processing to large-scale can manufacturing. Additionally, with our welding factory and painting booth on-site, we provide quality assurance, short delivery times, and cost reduction through integrated manufacturing, from material procurement to processing, welding, and painting. We accept orders from single-item processing to mass production. Please feel free to contact us for consultations regarding processing, even at the prototype stage. ◆ For inquiries via email or phone, please contact us here MAIL: info@fujikiko.biz TEL: 0248-54-1123 (Head Office)

Company：フジ機工
Price：Other

Processing Contract
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Processing Example] Hopper SUS304 Shaped Finish Pickling

We have handled material procurement, component processing, can manufacturing and welding, shaping and finishing, and pickling!

We would like to introduce a case of "Hopper SUS304 Shaped Finish Pickling" conducted by Shoei. SUS304 3.0t×φ600×height 300, including the cover was manufactured. We handled material procurement, component processing, can welding, shaped finishing, and pickling. Please feel free to contact us when you need our services. 【Specifications】 ■ Material: Stainless Steel ■ Lot: 1 piece (single item) *For more details, please refer to the related link page or feel free to contact us.

Company：ショウエイ本社
Price：Other

Processing Contract
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hopper

We will manufacture parts based on the drawings from the customer!

We manufacture parts based on drawings provided by our customers, including part layout, cutting, bending, welding, and inspection. This is a charging hopper for mixing liquids and powders. *For more details, please feel free to contact us. 【Unique Points of Our Company】 ■ Capable of handling projects with short delivery times ■ Able to manufacture parts with complex shapes ■ Protective tape is applied during part manufacturing to prevent scratches ■ Special diameter (non-standard) pipes can also be bent and manufactured from sheets.

Company：ファイネス
Price：Other

Processing Contract
stainless
Food Processing Equipment
Hopper

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] Promotion of discharge from a hopper of polypropylene and corn starch.

Adopted in the manufacturing equipment for impact-absorbing materials! Eliminating rat holes and blockages in the raw material hopper! Introducing case studies by powder handling professionals.

At the manufacturing facility for impact cushioning materials 【The raw materials are a mixture of polypropylene (2-3mm) + corn starch (powder)】 We have resolved issues with poor discharge such as rat holes and blockages in the raw material hopper! This user had previously tried other equipment. However, due to the situations described below, they were unable to resolve the troubles, leading to the introduction of our bridge breaker for the first time. (Results with other powder discharge equipment) - Vibrator ⇒ PP and corn starch separate. - Knocker ⇒ Rat holes are not resolved. === Notice === If we can see a small sample of the powder and the hopper drawings, we can provide suitable installation positions and operating methods accordingly. *For more details, please contact us or download and view the catalog.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0191 Mass flow conversion of small hoppers

The additional installation of the Brodisk has resolved the funnel flow.

We received an order for three Brody Disk Minis (including a controller) from an engineering company as a measure to address the discharge issues of a small hopper. After installation at the user's factory, the initial problems were improved; however, it was still experiencing funnel flow, and they consulted us about wanting to achieve as much mass flow as possible. After reviewing the powder specifications and the hopper drawings, we proposed adding three more Brody Disk Minis above the three that were already installed. After the addition, the funnel flow was resolved, and they have been using it smoothly. Even after adding the Brody Disk Minis, the existing controller was sufficient, keeping the total cost limited. For more details, please contact us. *We have many case studies published on our website. You can check them through the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Elimination of graphite powder shelf suspension

Introduction of case studies for the bridge breaker "Brodisk."

In the supply hopper, the phenomenon of arching (bridging) occurred due to the balance of powder pressure. The customer initially installed multiple air knockers, but that did not resolve the issue, leading to their consultation. Since it is a square hopper, by simply installing two blow discs, one on each side, and with a minimal air ON time, the arching was eliminated. The greatest feature of the blow disc is that it injects air along the inner wall of the hopper. The powder pressure causes the powder to be pressed against the inner wall of the hopper, increasing the friction between the particles and the wall, which leads to the arching phenomenon; however, our product is very effective in addressing this issue. [Overview] ■ Hopper: 500×500, hopper for feeder ■ Powder: graphite, fine powder *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous case studies. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0302 Promoting the outflow of zinc stearate from the hopper.

Introducing a case of the Brodisk Mini adopted to promote outflow from the hopper.

This is a case from a business that manufactures sintered products. The hopper has a relatively gentle slope, and there were difficulties with outflow due to the small diameter of the discharge outlet. Since they expressed a desire to see the actual product first, we provided samples along with our advice. The selected model, "Blow Disk Mini," consumes less air, allowing us to control all units simultaneously with a single built-in solenoid valve in the controller for air ON/OFF. 【Overview】 ■ Powder type: Zinc stearate ■ Hopper ・ Diameter: 400φ ・ Discharge outlet diameter: 50φ ・ Hopper slope: Over 50° ■ Blow Disk model, arrangement, quantity ・ 4 units of Blow Disk Mini (BD-08S-B) installed in pairs at different heights * For more details, please refer to the PDF document or feel free to contact us. * Our website features numerous examples of implementations. You can check them through the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0107 Response to poor discharge from the hopper of the bulk bag filling device.

Case of a blow disk adopted for a hopper of a bulk filling device with unstable raw material discharge.

The raw materials are transported by air to the raw material hopper of the bulk bag filling device, and from the hopper, the materials are fed to the bulk bag using a table feeder and a screw feeder. In cases where the materials are being cut out, the raw materials became biased in one direction within the hopper, leading to unstable discharge of the materials. By installing four blow disks and using a controller with four solenoid valves, we solved the problem by sequentially aerating one location at a time. 【Overview】 ■ Hopper dimensions: 1400×1400 ■ Powder type: Fertilizer (final product) <Reference values for aeration sequence and time> ■ Solenoid valve 1: 3 seconds ON / several seconds OFF ■ Solenoid valve 2: 3 seconds ON / several seconds OFF ■ Solenoid valve 3: 3 seconds ON / several seconds OFF ■ Solenoid valve 4: 3 seconds ON / several seconds OFF After the above, set an interval time (several tens of seconds to several minutes) Repeat the above * For more details, please refer to the PDF document or feel free to contact us. * Our website features numerous case studies. You can check them via the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0134 Clearing the blockage of wet vermiculite raw material

Eliminate the shelf suspension and bridge phenomenon of raw materials! Solve problems with multiple placements.

This is a case where the shelf suspension and bridging phenomenon of raw materials frequently occurred in a vermiculite raw ore hopper (transport device). Although it is a square hopper, it has three sides that are narrowed, so we installed one "broad disk" on each side. One was placed near the discharge outlet on the central side, and the two on the side were installed 150mm above the one on the central side. As a result, the flow issues of the raw material particles were resolved, and the efficiency of the production site improved. 【Overview】 ■ Raw material size: several mm (scaly) ■ Moisture content: over 5% ■ Specific gravity: about 1g/cc ■ Hopper dimensions: 1000×1000 * For more details, please refer to the PDF document or feel free to contact us. * Our website features numerous implementation examples, which can be checked via the link below.

Company：ミナギ
Price：Other

Powder Supply Device
Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0344 At a precious metal recycling factory

Solve the problem of the target powder not being discharged properly from the hopper of the powder handling equipment!

This is an example of a consultation regarding a situation where the target powder was not being discharged properly from the hopper of a powder handling device at a precious metal recycling facility. Although the powder is not particularly non-flowable, the insufficient slope to secure the hopper capacity led to discharge issues. Since it is a relatively small square hopper, we were able to resolve this trouble by installing one standard type "BD-15" blow disk on each side, for a total of four. 【Overview】 ■ Hopper size: 500×500 ■ Discharge diameter: 80A ■ Hopper slope: approximately 45° ■ Material size: around several hundred μm 【Product specifications, etc.】 ■ Blow disk BD-15S-W: 4 units ■ Controller C-SV4: 1 unit *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous case studies. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0449 Prevention of Flux Powder Residue

This is an introduction to a case where flux powder remains in a small hopper with a mixer.

This is an introduction to a case where a small hopper with a mixer has residual flux powder. The issue is the residue between the agitator along the cone section of the hopper and the inner wall of the hopper. (There is no bridging due to the effect of the mixer.) The Brody Disk Mini is very inexpensive and economical. Even if multiple units are installed, the costs are limited, providing excellent cost performance. 【Summary of Conditions】 ■ Hopper Diameter: 350φ ■ Sample: Flux (Average Particle Size: Approximately 5μm) <Product Specifications> ■ Brody Disk Mini: BD-08S-B, 8 units ■ Controller: C-SV1, 1 unit *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous implementation examples. You can check them via the link below.

Company：ミナギ
Price：Other

Other processing machines
others
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0497 Solving the difficulty of discharging film crushing material.

The trouble was resolved quickly! After suggesting the installation of one unit on each side for the corner hopper, it was implemented.

We would like to introduce a case where we received inquiries about discharge troubles with a square hopper for crushed material. We confirmed the sample of the target material that you sent in small quantities. Based on our experience, we communicated that there were no significant concerns, and since it was a square hopper, we suggested installing one on each side, after which it was implemented. The troubles were resolved immediately. Thank you for your adoption. 【Case Overview】 ■ Target Material: Crushed material of 50μm film (approximately 3-5mm) ■ Situation (1) Crushed material was compressed and bridged (2) Material only fell directly downward from the discharge area, forming a rat hole ■ Hopper: 500×500 (manufactured by MATSUI, TA95) 【Key Points of Our Equipment】 ■ The elastic disk (silicone) is very important in terms of the risk of foreign material contamination, as well as strength and durability. The silicone disk of our equipment is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller prepared. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0503 Heavy calcium carbonate - using a small hopper

Testing conducted by users! Introduction of cases where the Brodisk Mini and controller were implemented.

As a countermeasure for bridging in a small hopper, we received a request from the customer to borrow equipment for testing. Upon reviewing the hopper diagram, we determined that four Brody Disk Minis would be appropriate. However, when the Brody Disk Minis are installed on a flat surface (in this case, it is a corner hopper and installed flat), a high-pitched sound occurs. We informed them that if the air ON time is short, it would not be too bothersome, and proceeded with the test. The results were favorable, and they decided to introduce the Brody Disk Minis along with the controller. [Case Overview] ■ Subject: Heavy calcium carbonate (Product name: Micron Cal) ■ Hopper: 300×300 *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0527 Rat hole measures in the upper hopper of the quantitative supply device.

The subject is a very poorly flowing fine powder! This is an example of a substance with properties similar to titanium dioxide.

The user reported, "The fluidity is terrible, so we adopted a feeder with a mixer for the quantitative feeder part, but we are having trouble with rat holes occurring in the large hopper connected above it." The target material is a very poorly flowing fine powder, and while the substance name is undisclosed, upon reviewing the sample, it seemed to have properties similar to titanium dioxide. After reviewing the hopper diagram, the sample of the target material, and photos of the rat hole situation, we provided guidance on the arrangement and control of the blow disk, and it was adopted. I heard that the rat holes were resolved immediately after the installation of the equipment. [Overview of the hopper where the blow disk was installed this time] ■ Diameter: φ1000 ■ Bottom dimensions: approximately 500×500 ■ Height: approximately 700 *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0561 Eliminate the bridge in blast furnace cement.

I want to implement bridge measures in response to a trouble occurrence! Here is an example of a case where equipment was provided for free for introduction.

We would like to introduce a case study regarding "eliminating bridging in blast furnace cement" handled by Minagi Co., Ltd. We received an inquiry from a site that wanted to implement bridging countermeasures because they were responding to issues by hammering or poking with a stick from above the hopper when problems occurred. After reviewing the hopper diagram, we lent them suitable equipment free of charge, and due to the good results from the test use, they decided to implement it. [Case Summary] ■Issue - They wanted to implement bridging countermeasures because they were responding to issues by hammering or poking with a stick from above the hopper when problems occurred. ■Result - After reviewing the hopper diagram, we lent them suitable equipment free of charge, and they implemented it due to the good results from the test use. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Example of use with powder tea hopper

A Brody disk was installed in the residual section! The problem was resolved immediately with the use of this equipment!

We would like to introduce a case where this equipment was used as a countermeasure for the issue of tea powder residue remaining on one side of the hopper. Two standard Blowing Disks (BD-15) were installed in the residue area, and intermittent aeration was performed using the controller (C-SV1). Since the contents are food products, the customer requested a "Food Sanitation Test and Test Report," which we provided. Additionally, we can also provide other documents such as mill sheets. Customers who require these documents are encouraged to request them at the time of order. [Case Overview] ■ Target Equipment: Weighing Equipment ■ Target Material: Powdered Tea (approximately specific gravity 0.3) ■ Hopper: Φ600 ■ Discharge: Screw Feeder *For more details, please refer to the PDF materials or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0648 Eliminate the bridge of cosmetic raw materials.

A bridge in the hopper of the quantitative feeder! After a few seconds of air ON, the bridge collapse was resolved and everything is good.

We would like to introduce a case where the "Brodie Disk (Standard Type)" we handle resolved bridging issues with cosmetic raw materials. A problem occurred where bridging happened in the hopper of the quantitative supply device, and it could not be broken down with an air knocker. Therefore, we lent out the "Brodie Disk (Standard Type)" for testing on the actual machine, and after a few seconds of air ON, the bridging collapsed and the situation improved. 【Case Overview】 ■ Hopper ・500×600 ・2 sides - gentle slope, 2 sides - steep slope ■ Equipment Arrangement: A total of 4 Brodie Disks installed on the 2 gentle slope sides ■ Operation: Air ON manually ■ Result: After a few seconds of air ON, the bridging collapsed and the situation improved 【Key Points of Our Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability due to the risk of foreign material contamination. The silicone disk of our equipment excels in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is important! We provide guidance on what should be done. We also have a dedicated controller prepared.

Company：ミナギ
Price：Other

Mixer/agitator
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0663 At the hopper of the air transport machine

We can provide guidance on model selection, placement, and control according to the user's requirements!

We would like to introduce a case study where our "Brodisk" was adopted. The fluidity of the material was quite poor, and although there was an aeration mechanism, bridging occurred at the top. As a countermeasure, our product was installed. The size of the outlet at the bottom of the hopper is 2S. There is a metal multi-layer mesh section above this, and by installing the Brodisk (standard type BD-15) further up (approximately one-third from the bottom of the hopper), the customer's issue was resolved. 【Case Overview】 ■ Equipment: Hopper of an air transport system ■ Existing countermeasure: Aeration near the discharge section using multi-layer mesh ■ Hopper diameter: Ø1000 ■ Material: Spices *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

At the cellulose fiber hopper.

Case study of Brody disk compatibility with cellulose fibers of length 2-3mm!

We would like to introduce a case study on the implementation of the "Brodie Disk" as a countermeasure for bridging in the upper hopper of a circle feeder. The customer planned to supply cellulose fibers with a length of 2-3mm using a circle feeder. They mentioned having struggled with air knockers in the past. Having experienced similar materials before, we provided a quotation based on the model, layout examples, and equipment. After the implementation, there have been no occurrences of bridging, and the system is operating smoothly. 【Case Overview】 ■ Target Material: Cellulose fibers (length 2-3mm, high moisture content) ■ Hopper Dimensions: 1200×1200 ■ Hopper Discharge Diameter: Ø300 ■ Control: 12 Brodie Disks (BD-15) controlled by a controller (C-SV6) with 6 built-in solenoid valves, sequentially aerating in pairs with a time difference. *For more details, please download the PDF or feel free to contact us.

Company：ミナギ
Price：Other

Other powder equipment
Mixer/agitator
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Elimination of rat holes in air transport hoppers.

Configuration and control are important! Implement it immediately, and your customers' issues will be easily resolved.

Here is an example of the adoption of "Blow Disc" in the recycling industry. We received a consultation from a customer regarding the occurrence of rat-hole phenomenon in the hopper of an air transport device. They found it difficult to address this issue using other methods, such as knockers, due to problems like noise from impacts and damage to the hopper, and wanted to use the Blow Disc as a solution. After reviewing the hopper's drawings and contents, we assessed the situation based on our experience and determined that there were no significant concerns. We provided recommendations for the "model, layout, and control examples." The implementation was carried out immediately, and the customer's issue was easily resolved. 【Usage Conditions Overview】 ■ Hopper dimensions: 700×700 ■ Hopper bottom dimensions: 200×200 ■ Discharge method: Suction through piping from the upper direction of the hopper bottom ■ Contents: Equivalent to carbon powder *For more details, please download the PDF or feel free to contact us.

Company：ミナギ
Price：Other

Other powder equipment
Mixer/agitator
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hopper Product List and Ranking from 12 Manufacturers, Suppliers and Companies | IPROS GMS

Hopper Manufacturer, Suppliers and Company Rankings

Hopper Product ranking