Inspection Equipment Product List and Ranking from 29 Manufacturers, Suppliers and Companies

Plain Surface Quality Inspection Device "Mujiken Express"

Overwhelming inspection performance with high speed and high capacity! Various aggregation functions are also included as standard.

The "Mujiken Express" is an inspection device that performs high-speed visual inspection of sheet surfaces. It can conduct appearance inspections of various products without selecting the measured object or substrate as long as it is in a web (sheet) form. It accurately extracts defects from plain materials that were difficult to detect, including high-performance films, general films, paper, and foils. By adopting a 23-inch wide touch monitor, it has become possible to clearly confirm the detected fine defects from a distance. 【Features】 ■ Achieves speedy data analysis ■ High-speed line compatibility with in-house image processing board and ultra-high-speed camera ■ Adoption of CoaXPress interface ■ Use of a large wide touch monitor ■ Comprehensive peripheral devices *For more details, please refer to the PDF document or feel free to contact us.

Company：ニレコ
Price：Other

Other inspection equipment and devices
Visual Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Parallel link type high-speed appearance image inspection device

Wide operating range! Parallel link type high-speed appearance inspection device with a maximum bending angle of 90 degrees and a turning angle of 360 degrees.

This product is a parallel link type high-speed appearance image inspection device that conducts visual inspections by approaching the targeted position from various angles with a single camera. It has a wide operating range with a maximum bending angle of 90 degrees and a rotation angle of 360 degrees. We can accommodate everything from device design to manufacturing tailored to product specifications based on evaluation and verification with sample work. 【Features】 ■ Wide operating range: maximum bending angle of 90 degrees and rotation angle of 360 degrees ■ Coordinated operation combining XYZ stage and rotating (Rz) stage ■ Positioning accuracy of ±0.05 degrees ■ High-speed appearance inspection *For more details, please refer to the PDF document or feel free to contact us.

Company：岡谷鋼機名古屋本店
Price：Other

Other inspection equipment and devices
others
Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Belt sealer custom "Expiration date printing inspection presence or absence inspection device"

The date printing inspection of the belt sealer is a so-called "date printing presence or absence inspection device" that uses a camera to check whether the date is properly stamped or not.

If the expiration date is not printed due to some trouble and goes unnoticed, leading to shipment, it could result in very serious complaints. As a countermeasure, we propose a printing inspection device that can be retrofitted to the belt sealers you currently use. Continuous heat sealing bag sealers are very versatile. However, the fact that they can handle multiple tasks with one machine also poses the risk of generating non-conforming products. As a countermeasure, the modification and installation of a printing presence inspection device has become recognized as necessary in the current trends surrounding the food industry. We offer a retrofitted "printing presence inspection device" for belt sealers tailored to the sealers you are currently using, so if you are interested, please do not hesitate to contact us.

Company：ヒライ商事
Price：Other

Vacuum Packaging Machine
Other packaging machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automatic visual inspection device

Automatically map defects (scratches, foreign objects) at the submicron level.

The automatic visual inspection device that we handle is a device for inspecting defects in various materials such as film and glass. It can detect a variety of defects including scratches, foreign objects, and pinholes. The detected defects are mapped, and by simply clicking on their positions with a mouse, you can observe microscope images. It also supports the inspection of roll film ends that were previously done visually. 【Features】 ■ Performs automatic mapping to obtain positional information of scratches and foreign objects at the sub-micron level ■ Conducts detailed inspections of each scratch and foreign object based on the positional information from the mapping data ■ Enables a variety of inspections including transmission/reflection, bright/dark field, polarization, and differential interference observation ■ Has a significant track record of inspecting defects that were previously difficult to assess ■ Visualizes defects and unevenness that were challenging to detect through visual inspection, enabling simplified inspections (Unevenness Viewer) *For more details, please download the PDF or feel free to contact us.

Company：アイゲート本社
Price：Other

Visual Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Development Case] Image Inspection Device

Reduce computation time through algorithm optimization and parallel processing! Achieve your desired processing time.

We would like to introduce a development case of the "Image Inspection Device" commissioned by Spectra Co., Ltd. We received a request regarding the substrate for agricultural product image inspection and discrimination devices, aiming to reduce the current inspection and discrimination processing time from about 30 seconds to approximately 5 seconds. Through our development, we optimized the image processing algorithm provided by the client. Additionally, we reduced computation time through algorithm optimization and parallel processing, achieving the client's desired processing time. 【Case Details】 ■ Target: Substrate for agricultural product image inspection and discrimination devices ■ Client Requests - Reduce the current inspection and discrimination processing time from about 30 seconds to approximately 5 seconds - Save inspection results and image data on the substrate - I/F (USB, Bluetooth), PC application *For more details, please refer to the PDF document or feel free to contact us.

Company：スペクトラ
Price：Other

Embedded system design service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Printing Surface Image Inspection Device 'EasyMax.GS Series'

Achieved further acceleration of camera specs (80MHz)! Enhanced detection capability, high-quality defect images, and increased production speed.

The "EasyMax.GS Series" is a series that offers systems suitable for customers from a lineup of nine, based on the "EasyMax.GS," which is suitable for web-based printing inspection. Equipped with a new algorithm detection engine, it has become easier to detect defects that are similar in color to the design by performing brightness conversion. Furthermore, by selecting an appropriate color conversion method according to the type of defect, it is now possible to stably detect faint lines and slight unevenness that were difficult to detect with conventional methods. 【Features】 ■ LED lighting designed uniquely ■ Equipped with a new algorithm detection engine ■ Enhanced detection capabilities through digitization ■ Full digital, high-speed processing ■ Stable inspection ■ Ability to confirm the quality of products during production *For more details, please refer to the PDF materials or feel free to contact us.

Company：ヒューテック
Price：Other

Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-contact surface image inspection device "MaxEye.ST+Series"

No need for a signal processing panel, saving space! Identifying and recovering from issues is also easy.

The "MaxEye.ST+Series" is a surface inspection device that utilizes a smart camera based on a new platform. By incorporating image processing capabilities into the camera, defect detection can be performed directly by the camera, eliminating the need for a signal processing board and saving space. The high-precision defect discrimination process is maintained, and the user-friendly screen layout reduces the burden on the operating personnel. 【Features】 ■ Adoption of a new platform smart camera ■ Defect detection and discrimination ■ Classification of defects into 10 ranks based on their importance ■ Efficient analysis of the causes of defects ■ Realization of a reliable and maintainable system *For more details, please refer to the PDF document or feel free to contact us.

Company：ヒューテック
Price：Other

Other inspection equipment and devices
Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flux penetration type "non-destructive testing device"

Leave it to us for anything related to non-destructive testing equipment.

The magnetic flux transmission type "non-destructive testing device" emits alternating magnetic flux from a coil onto the test object, generating eddy currents. The generated eddy currents release a magnetic flux that cancels out the magnetic flux from the coil. If there is a disturbance in the magnetic flux, this sensor detects that disturbance. Additionally, this sensor is a type of electromagnetic induction sensor. By detecting the amplitude and phase shift, it can determine pass or fail. 【Features of the Magnetic Flux Transmission Type Sensor】 ■ Fast inspection time ■ Capable of inspecting inside metals ■ High defect detection accuracy ■ Less affected by surface conditions ■ No need for pre-processing or post-processing, etc. *For more details, please download the PDF or feel free to contact us.

Company：偕成ハイテック
Price：Other

Other process controls

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Must-see for those looking for non-destructive testing] Magnetic flux leakage inspection device *Catalog available now

The inspection target work is all types of metal! It is a device that inspects various contents such as internal defects.

The magnetic flux leakage inspection device is a device that can inspect the entire range from surface defects to internal defects. It is a device that can be widely applied, from detecting surface defects such as cracks to measuring residual stress related to the metal structure. 【Features of the magnetic flux leakage sensor】 ■ Fast inspection time ■ Capable of inspecting the interior of metals ■ High defect detection accuracy ■ Less affected by surface conditions ■ No need for pre-treatment or post-treatment, etc. *For more details, please refer to the PDF document or feel free to contact us.

Company：偕成ハイテック
Price：Other

Defect Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-destructive testing device "Magnetic Flux Leakage Testing Device"

The inspection target work is all types of metals! It is a non-destructive testing device that inspects various contents such as internal defects. The principle materials for non-destructive testing are also under development.

The magnetic flux leakage inspection device is a non-destructive testing device that can inspect the entire object from surface defects to internal defects. It is a non-destructive testing device that can be widely applied, from detecting surface defects such as cracks to measuring residual stress related to the metal structure. 【Features of the magnetic flux leakage sensor】 ■ Fast inspection time ■ Capable of inspecting the interior of metals ■ High defect detection accuracy ■ Less affected by surface conditions ■ No need for pre-treatment or post-treatment, etc. *For more details, please refer to the PDF document or feel free to contact us.

Company：偕成ハイテック
Price：Other

Defect Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fully Automatic Inspection Machine "TI Series"

With casters! Fully automatic inspection machine for bearings developed by our company!

This product is an automatic inspection machine for the inner and outer rings of bearings. It is equipped with casters and can operate with a household outlet. It automatically measures the diameter of both ends of the product and the R groove diameter at the center, displaying the values on a counter. It also identifies good and defective items within the set values. 【Features】 ■ Equipped with casters ■ Can operate with a household outlet ■ Automatically measures the diameter of both ends of the product and the R groove diameter at the center, displaying the values on a counter ■ Identifies good and defective items within the set values *For more details, please download the PDF or feel free to contact us.

Company：田中精機
Price：Other

Metal bearings
Plastic bearings
Mechanical Design

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cylinder Head Appearance Inspection Device

The multi-joint robotic hand is equipped with a camera and lighting to perform image inspection on each surface!

The "Cylinder Head Appearance Inspection Device" is an inspection device using a multi-joint robot. The inspection process consists of two stages. The multi-joint robot hand is equipped with a camera and lighting to perform image inspections on each surface. Additionally, it is composed of a conveyor section for transporting between the front and back processes and an image-based defect inspection system. The equipment dimensions are L4500mm × W3000mm × H2500mm. 【Features】 ■ Inspection device using a multi-joint robot ■ The multi-joint robot hand is equipped with a camera and lighting to conduct image inspections on each surface ■ Composed of a conveyor section for transporting between the front and back processes and an image-based defect inspection system ■ Cycle time: 0.83 minutes or less ■ Equipment dimensions: L4500mm × W3000mm × H2500mm *For more details, please refer to the PDF document or feel free to contact us.

Company：東邦工業
Price：Other

Other industrial robots
Visual Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Assembly Transport Inspection Device 'CACT-01'

Work is transported to each station via automatic conveyance. Pre-assembly inspection, assembly, and post-assembly inspection are conducted at each station.

The 『CACT-01』 is a device that performs assembly, transport, and inspection of clutch bearings. It automatically transports the workpieces sent from the loading device to each station, where pre-assembly inspection, assembly, and post-assembly inspection are conducted at each station. During the inspection, pass/fail judgments are made based on pre-set numerical ranges. If the values are within the range, the workpiece is considered passed and flows to the next process; if outside the range, it is deemed failed and is ejected as NG before flowing to the next process. By incorporating this product into the assembly line, we can guarantee all inspection items before and after assembly. 【Features】 ■ Capable of assembly, transport, and inspection of clutch bearings ■ Pass/fail judgments can be made based on pre-set numerical ranges during inspection ■ Passed items flow to the next process if within the range ■ Failed items are ejected as NG before flowing to the next process if outside the range ■ Guarantees all inspection items before and after assembly *For more details, please refer to the PDF document or feel free to contact us.

Company：エヌ・エフ・エー・サービスセンター
Price：Other

Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FA (Factory Automation) equipment

We propose various testing devices tailored to different products.

Our company consistently manufactures and sells various measuring instruments, including appearance inspection devices (camera image inspection systems), automatic transport devices (such as auto loaders), quality inspection devices (such as dimension measuring instruments), precision processing devices (such as small polishing machines), and various specialized jigs, as well as NC devices and FA devices and jigs. We thoroughly create products tailored to our customers' requests and materials, from design to everything being custom-made. Please feel free to consult us about any current concerns or thoughts regarding your materials. *For more details, please download the PDF or contact us.*

Company：NFA R&D
Price：Other

Other FA equipment
Processing Jig
Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inspection Equipment Product List and Ranking from 29 Manufacturers, Suppliers and Companies

Inspection Equipment Manufacturer, Suppliers and Company Rankings

Inspection Equipment Product ranking