Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
91～105 item / All 180 items
NFA formaldehyde-free glass fiber insulation material
In the United States, the use of glass wool (yellow or pink glass wool) that uses existing phenol as a binder is banned in some states due to the release of formaldehyde, which affects health. NFA is a formaldehyde-free glass wool insulation material developed as an alternative.
Industry No.1 insulation performance! SGL's graphite/carbon soft felt [GFA] / [KFA]
SGL's soft felt GFA/KFA is based on rayon-based carbon fibers. Rayon-based fibers have a large surface area and high radiation effect. Therefore, they can exhibit higher thermal insulation performance. <Main Features> ◎ Excellent thermal insulation performance ◎ High temperature stability ◎ Flexibility ◎ Lightweight ◎ High purity compliance (ash content < 20 ppm) ◎ Chemical stability ◎ Low wettability (does not wet with molten metals or glass) ◎ Homogeneity (uniform throughout even in long rolls) ◎ Two types: graphite (GFA) and carbon (KFA)
Excellent insulation at temperatures above 2000℃! SGL's graphite molded insulation materials 【MFA】/【RFA】.
The molded insulation material MFA/RFA is based on rayon-based carbon fibers. Rayon-based fibers have a large surface area and high radiation effectiveness. Therefore, they can exhibit higher insulation performance. <Main Features> ◎ Excellent insulation performance ◎ High-temperature stability ◎ Lightweight ◎ High purity (ash content < 20ppm) ◎ Two types: short fibers (MFA) and long fibers (RFA) ◎ Surface protection with various coatings
Directly construct the mortar base on the insulation material. Tiles and paint can be applied directly. Insulation material with excellent workability, processability, adhesion, durability, and fire resistance.
"Rock Cell Board" is an insulation material that excels in workability, processability, adhesion, and durability, primarily used for external and internal insulation. Since its main raw material is inorganic calcium carbonate, it only carbonizes and does not burn. It can be cut with a utility knife, can use adhesives, and is easy to install. It has excellent adhesion to various adhesives, mortars, and cements, allowing for direct tile application. Additionally, it can be installed with nails and adhesives for retrofitting, making it suitable for both new constructions and renovations. 【Features】 - Minimal aging changes, contributing to the longevity of buildings - Low-density foam with a completely independent bubble structure - Can be cut with a utility knife, easy to install with adhesives - Various finishes are possible, including tile, paint, and mortar - High water resistance and moisture resistance, resulting in minimal reduction in insulation performance and reduced internal condensation *For more details, please feel free to contact us.
![Industrial insulation material [using PTFE with excellent heat and corrosion resistance]](https://image.mono.ipros.com/public/product/image/169/327725001/IPROS_15790007215728990000.JPG?w=280&h=280)
Pipe heaters and cylinders prevent heat loss! Reduce power consumption and CO2 emissions! Shapes and materials can be freely customized according to application!
The jacket heater made by Shinwabane is constructed using advanced sewing technology that employs fiberglass as insulation material. For the surface material, we have selected PTFE, which excels in heat and corrosion resistance, suitable for use in semiconductor, resin molding, food, and medical applications, and it is manufactured through sewing. ■ Examples of insulation applications Process chambers, pipe heaters, injection molding cylinders, food heating lines, etc. ■ Examples of production - Various small shapes - Various shapes for block irregularities - Various clamps - For large gate valves - For R pipes - For square blocks It can be freely customized according to specifications, applications, shapes, and prices, so please feel free to consult us about anything. ◎ For more details, please contact us or refer to the catalog.
[Sample available!] Formaldehyde-free! High-performance glass wool insulation material that excels in comfort, health, safety, and economy.
"Acria" is a glass wool insulation material that achieves excellent thermal insulation performance through fine fiber technology. Since glass is the main raw material, it is difficult to ignite and resistant to high temperatures, which minimizes the damage from fire spread or secondary fires in the event of a fire. To ensure health and safety, it is manufactured using materials that contain no formaldehyde whatsoever. Additionally, we offer "Acria α (Alpha)," which achieves a thermal conductivity of 0.032 W/(m·K) through ultra-fine fibers of approximately 3 microns. 【Features】 ■ Excellent thermal insulation performance achieved through fine fiber technology ■ Comfortable even after 20 years; insulation performance remains unchanged ■ No formaldehyde used ■ Fire-resistant and difficult to ignite ■ High performance at low cost *For more details, please refer to the PDF materials or feel free to contact us.
Olefins-based rigid foam. Samples are available!
To minimize heat loss to the floor below and make electric floor heating effective, the installation of insulation material is essential. The 3S Zetron, being a rigid insulation material, can be laid over the substrate.
Construction is easy! Suitable for apartments, daycare centers, and wooden nursing homes.
The moisture-resistant residential rock wool insulation "Amumat" is a filling method insulation material suitable for ceilings, walls, and intermediate floors. It is ideal for multi-family housing such as apartments, daycare centers, and wooden nursing homes due to its excellent fire resistance and soundproofing properties. 【Features】 ■ Can be used for partition walls and intermediate floors in multi-family housing with specified density ■ Easy to install ■ A flyer with examples of insulation material selection is currently being offered *For more details, please contact us or download the PDF to view.
![Environmentally friendly expanded polystyrene insulation material [*Cut samples available*]](https://image.mono.ipros.com/public/product/image/d93/2000248227/IPROS5798477816350903868.GIF?w=280&h=280)
There are no gaps, so the insulation effect is excellent! Pre-cut to the construction dimensions, eliminating waste and shortening the construction period!
Matsubara Industry's environmentally friendly expanded polystyrene insulation material "Pinal Foam" fits perfectly without gaps, providing excellent insulation effectiveness! It is also ideal for external insulation construction methods. We can deliver it pre-cut to the required dimensions, allowing for waste reduction and shortened construction periods. *Limited to 30 companies for cut sample giveaways! For more details, please contact us using the form below. 【Benefits of Pre-Cutting】 ◆ Significantly reduces the generation of scrap materials on-site, greatly lowering industrial waste disposal costs! ◆ Prevents insulation material shavings and dust from scattering to neighboring areas due to wind! ◆ When delivered in 3x6 sheets, about 18-25% is typically lost, but this loss is eliminated! ◆ Simplifies the construction process, reducing costs through shortened construction periods! ◆ Thick insulation materials that comply with next-generation energy-saving standards can also be cut! *Catalogs with case studies are currently available! For more details, please contact us or download the catalog to view it.
Insulation of the foundation under the floor of the first-floor unit bath.
Water-resistant polystyrene material used in fish boxes and cooler boxes. It repels moisture and humidity, continues to exhibit excellent insulation properties, and contributes to the durability of the building itself. 【Features】 ○ Repels moisture ○ Custom sizes available to match foundation height ○ Streamlines foundation insulation construction. For more details, please contact us or download the catalog.
![Ant-proof insulation material "Perform Guard" [Free cut sample available]](https://image.mono.ipros.com/public/product/image/bd2/2000126433/IPROS8094653571852407094.png?w=280&h=280)
Ant-repellent performance lasts semi-permanently! Contains a uniform amount of inorganic substances that are harmless to the human body. No soil pollution, and it is also harmless to the global environment.
"Perform Guard" is an ant-proof insulation material created using a technology developed by AFM Corporation that uniformly incorporates a harmless inorganic substance (boron-based compound) for the human body. Its ant-proof performance lasts semi-permanently, and since there is no natural decomposition of the components, it does not cause soil contamination and does not harm the global environment. It is a product that is exempt from regulations on sick house measures, does not emit harmful substances such as formaldehyde, and is considerate of health and the environment. 【Features】 ○ Ant-proof treatment that is harmless to the human body ○ Ant-proof performance that lasts semi-permanently ○ Insulation installation, ant-proof measures, and condensation measures can be done all at once *If you would like a sample, please contact us with "Request for Cut Sample" noted. *For more details, please contact us or download the PDF.
