Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.
106～120 item / All 158 items
![Immunochromatography Production Cover Tape Laminator [Made in Japan]](https://image.mono.ipros.com/public/product/image/1bd/2000120535/IPROS17113443955338679759.jpeg?w=280&h=280)
This is a device for temporarily attaching cover tape to a backing card after membranes and various pads have been installed.
■Domestic original products from Fordix ■Easy to set up attachments that were difficult by hand ■Tabletop type simple design
We also have a laminator equipped with a heater!
At Yodogawa Sansei Co., Ltd., we perform "lamination and cutting." We have various laminators that bond roll materials together, and it is also possible to slit the materials using a score cutter while laminating. Additionally, after lamination, it is possible to cut the materials into sheets. We also have laminators equipped with heaters for the rolls. 【Features】 ■ It is possible to slit the materials using a score cutter while laminating. ■ It is also possible to cut the materials into sheets after lamination. ■ We have laminators equipped with heaters for the rolls. *For more details, please download the PDF or feel free to contact us.
Supports thermal lamination and pressure lamination using heated rolls!
The "lamination device" is a machine designed for optical and functional films and thin steel plates, compatible with thermal lamination using heated rolls and pressure lamination. It features a custom design that accommodates both development and mass production equipment. 【Features】 ■ Custom design that supports both development and mass production equipment ■ High safety and technical standards *For more details, please refer to the PDF document or feel free to contact us.
We have incorporated thermal lamination technology into our resin film, adhesive material punching, and laminating and composite processing technology!
Otis specializes in die-cutting and lamination processing of resin films such as PET and PI, adhesive tapes, metal foils, and cushioning materials. With in-house developed equipment and unique know-how, we have established "one-pass processing" technology that allows for continuous processing of multiple materials on a single line, enabling high-speed and high-precision composite processing of different materials. In addition to die-cutting and lamination processing, we have developed a thermal lamination unit based on our in-house developed laminating machine, which has expanded our processing capabilities. By combining multiple heating methods, we have achieved thermal bonding at stable temperatures. Furthermore, we can customize processing conditions such as pressure and preheating time for each material and processed product according to customer requirements, allowing for high-precision lamination. Additionally, by combining this with one-pass processing, it is also possible to bond only specific parts. We are also challenging ourselves with difficult processing combinations such as fine shapes, small diameter processing, and narrow or frame-shaped products. For shape processing of thermoplastic, thermosetting sheets, and B-stage adhesive and sealing films, as well as lamination of different materials and shapes, trust Otis.
From general substrates to high-density interconnection boards, DFR is cut to the substrate size and fully automated laminated.
The "YTACL-8302F" is an automatic sheet laminator that laminates photosensitive dry film resist in a frame shape according to the length of the substrate on both sides of the CCL and copper-clad laminate being fed in. It ensures adhesion through a dual-pressure laminating roll that inherits the genes of ACL. The DFR unwinding features a forced unwinding mechanism with a drive roll linked to the main motor, along with a tension roll that absorbs excess tension. This stabilizes the transport of the substrate after temporary attachment by suppressing both sagging and wrinkles in the film, as well as excessive tension. 【Features】 ■ Automatically laminates photosensitive dry film resist in a frame shape according to the length of the substrate ■ Ensures adhesion through a dual-pressure laminating roll that inherits the genes of ACL ■ Combines a forced unwinding mechanism with a tension roll that absorbs excess tension ■ Suppresses both sagging and wrinkles in the film as well as excessive tension ■ Stabilizes substrate transport after temporary attachment *For more details, please refer to the PDF document or feel free to contact us.
Our original brand! Standard machines, as well as handmade custom-made machines, are active in many companies.
We would like to introduce the original brand 'FIRST' products from Daisei Laminator Co., Ltd. We offer ITO circuit formation / DFR laminators "MINRTR-250V type / 500V type" and PCB circuit formation / DFR laminator "YTACL-8302 type," among others. Our brand is active in many companies, not only with standard machines but also with handmade custom machines. 【Features】 ■ Confidence in proposing over 5,000 laminators for various industries ■ Expertise in roll and lamination technology, as well as automated control and robot technology for mass production, along with know-how in auto cutting, vacuum, and cutting and punching processes ■ Also engaged in lamination processing, slitting, and punching ■ Continuously stocked with dozens of original laminators by type, and we receive numerous requests for manufacturing development support (test processing) *For more details, please refer to the PDF document or feel free to contact us.
Flexible response to various safety standards. Achieves stable roll drive from high speed to low speed.
The "VA-420IV" is a laminator specifically designed for various wafers and small-sized substrates. It expands the compatible width according to the dry film roll core standards. The dedicated design focused on small sizes excels in workability, and adjusting the pressure balance of the laminate roll becomes easy. Additionally, it is equipped with a motor-driven cover film winding device, allowing for lamination of various functional films in addition to DFR. 【Features】 ■ Compatible width for roll core installation: 350mm ■ High-pressure lamination support ■ High-strength silicone rubber lining ■ Stable roll drive from high speed to low speed ■ Dust reduction measures *For more details, please refer to the PDF materials or feel free to contact us.
Supports recipe registration! With the semi-standard model, we have reached this level of capability.
The "VA-770" is a laminator equipped with a tension controller that measures the film's outer diameter to reduce axial torque, allowing for the stabilization of the tension applied to the film for printed circuit boards and electronic materials. With a touch panel, it is possible to set and visually monitor the laminating temperature, laminating speed, and film tension all at once. Since each condition can be registered as a recipe, the risk of setting errors is reduced when manufacturing multiple products with different production conditions. 【Features】 ■ Automatic control of film tension ■ Unified visibility of operating conditions ■ Supports recipe registration ■ Improved maintainability ■ Enhanced cleanliness *For more details, please refer to the PDF materials or feel free to contact us.
Compatible with all materials! A laminating device ideal for LCD films and various optical films.
"Dry Laminate" is a product of Ichikin Kogyo Co., Ltd., which manufactures and sells machinery for polymer chemical industries. This product is a laminating device compatible with all types of materials. Adhesive is applied, dried, and then bonded using heated rolls. It is ideal for applications such as liquid crystal films, various optical films, and materials for various batteries. [Laminating Device and Other Equipment Lineup] ■ Laminating Device ■ Microwave Heat Treatment Device ■ Code Processing Equipment ■ Batch Oven *For more details, please refer to the catalog or feel free to contact us.
One-touch from lamination to cutting! A full-auto laminator that doesn't require a set of laminating sheets.
The "Revo Series" is an auto laminator that can automatically perform everything from laminating to cutting with just one touch. We offer the "Revo-Office," which has a design and size perfect for offices, the "Revo-T-14," which achieves outstanding speed and compactness, and the entry-level model "Revo-Any." Each model has different features, so you can choose according to your needs. 【Features】 ■ Easy maintenance ■ Equipped with an internal cutter ■ Automatic paper feeding *For more details, please refer to the catalog or feel free to contact us.
Products that were previously optional are now standard equipment, making them even more convenient!
The "Camellia1600CL II" is a standard model cold laminator equipped with a space-saving design, low-temperature function, and electric UP & DOWN roller function. The position of the power switch has been changed from the floor to a more accessible location, and the table height has been increased by 90mm, further enhancing operability. Moreover, despite being compatible with a width of 1,600mm, the overall size of the unit is almost the same as previous models, so there is no need to worry about installation space when replacing it. 【Features】 ■ Made even easier to use with the renewal ■ Achieves space-saving ■ Outstanding operability ■ Various functions are standard equipment *For more details, please download the PDF or feel free to contact us.
Automatically peels the laminate film and stacks it in the output tray!
We would like to introduce our semi-automatic PP laminator "Vera" that we handle. The control panel equipped with a touch screen allows for quick and easy machine settings without the need for complicated operations. Additionally, the ESD wheels eliminate static electricity. This mechanism enhances production efficiency and makes it easy to move the machine within the workspace. 【Features】 ■ Easy operation ■ Release mechanism ■ Static electricity mechanism *For more details, please download the PDF or feel free to contact us.
タッチスクリーンを採用したコントロールパネル！難しい操作を必要としません
当社で取り扱っているフルオートPPラミネーター『ベラデュオ』に ついてご紹介いたします。 ESDホイールにより、静電気を除去。この機構により生産効率を 高めることができ、また作業スペースでの機械の移動も簡単。 また、ラミネートフィルムを自動で剥離し、出力トレイにスタックする 剥離機構を搭載しています。 【特長】 ■簡単操作 ■剥離機構 ■静電機構 ※詳しくはPDFをダウンロードしていただくか、お気軽にお問い合わせください。
We have adopted a touch-operated digital LCD, allowing for intuitive operation!
The "RevoFlex" is the high-end model of the fully automatic laminator "Revo Series." While inheriting the ease and convenience of the Revo Series, it features improved processing accuracy through side cuts and the option to choose whether or not to have margins, catering to the needs of high-end users. From feeding the original document to laminating and cutting the margin areas, the entire laminating process can be completed with the push of a single button. 【Features】 ■ Fully automatic lamination ■ Side slit mechanism ■ Digital LCD panel ■ Open mechanism *For more details, please refer to the related links or feel free to contact us.
By installing the optional winding device, cold processing is also possible!
The "29DX" is a hot roll laminator that supports A1 size and excels in operability and stability. By installing an optional winding device, it can also accommodate cold lamination processing. Additionally, it features an LCD display and computer control, making it easy for anyone to use. It emphasizes finish quality while maintaining ease of use, and it is compatible with thick laminates. 【Features】 ■ Easy operation with A1 size support ■ Simple operability and thick laminate compatibility ■ Upgradeable expandability *For more details, please refer to the related links or feel free to contact us.
