Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 158 items
Introducing the dry film laminator.
- Effective: 600mm - Speed: Max 3.0m/min - Roll: Special heat-resistant silicone - Pressurization: Air cylinder - Heating: Far infrared heater Max 150℃ - Power supply: Single-phase 200V/JK type - Heating: Electromagnetic induction heating method
Achieving an unprecedented compact size that can be placed on a tabletop, it continuously and precisely applies various functional films that have been pre-cut for wafers and LCDs.
● Effective width: 200-300mm ● Cycle time: 1-4 pieces/min ● Pressing method: Air cylinder pressing ● Adhesion accuracy: ±0.1mm ● Machine dimensions: W860×D690×H494mm ● Air source: 490kpa (5km/cm2) ● Power supply: AC/100V 50/60Hz ● Weight: 100kg
A device that automatically cuts dry film on the substrate and applies it to a frame. Supports sizes up to 610×610mm. Fully automated from substrate supply to retrieval.
● Power Supply: AC200V 3-phase ● Air Source: 0.5Mpa ● Machine Dimensions: W2150×D1440×H1705mm ● Weight: 1800kg ● Board Dimensions: L 250〜610mm W 250〜610mm T 0.05〜3mm ● Dry Film Dimensions: W 250〜610mm T 15〜76μm D 160mm ● Functions ・Tact: 1〜4m/min. ・Processing Capacity: 4pcs/min. ・Accuracy: ±1mm ・Temperature Control Range: Room Temperature to 120℃ ※ Options: Preheat Device, After Lamination Device, Cleaning Roll, Cleanroom Compatible
The AL-300 model performs half-cutting of various functional films into arbitrary shapes using a laser, while leaving the release paper intact, for wafer bonding and wafer applications.
If you have any questions regarding the explanation below, please feel free to contact us.
Preheat the reel-shaped polyimide film and use a laminator to bond copper foil in multiple rows with low tension and high precision to the circuit polyimide film.
●Effective width: 60 to 160 mm ●Speed: 0.3 to 3.0 m/min ●Pressurization method: Air cylinder pressurization ●Drying oven: Panel heater heating type ●Machine dimensions: W1100 × D4500 × H1800 mm ●Air source: 0.5 MPa or more ●Power supply: φ3 200V 50/60Hz ●Weight: 3700 kg
This vacuum laminator uses vacuum to bond films without bubbles on build-up substrates with uneven surfaces, wafer bonding, COF/FPC substrates, and more.
This vacuum laminator is a device that adheres films without bubbles under vacuum to build-up substrates with uneven surfaces, wafer bonding, COF/FPC substrates, and more.
This printed circuit board dry film laminator is a device for bonding photosensitive resist film to printed circuit boards. It features a compact design, and...
●Effective width: 100 to 550 mm ●Speed: 0 to 3.0 m/min ●Pressurization method: Air cylinder pressurization ●Temperature control range: Room temperature to 150°C ●Machine dimensions: W1110 × D1200 × H1220 mm ●Air source: 0.5 MPa or higher ●Power supply: φ3 200V 9.5 kW ●Weight: 280 kg
High-precision and optimal printing is possible for the work.
● Printing speed: 15 to 150 m/min ● Number of printing colors: 5 colors (1 UV color) * ● Maximum web width: 260 mm ● Maximum printing width: 254 mm ● Printing repeat length: 140 to 610 mm ● Maximum unwind diameter: 1200 mm ● Maximum rewind diameter: 1200 mm ● Machine dimensions: W1450 x L8361 x H1974 mm ● Power supply: 3-phase AC 200V 11 kW * Additional colors can be added as an option.
Handled by M.C.K. Corporation,
This is an introduction to the sheet-to-roll DF laminator.
Handled by M.C.K. Corporation,
Introducing the fully automatic DFR laminator.
It is a device that automatically laminates OPP film onto printed materials. Compatible with full-size sheets.
It is a device that automatically laminates OPP film onto printed materials.
It can be laminated.
It is a device that laminates printed materials while applying adhesive to the film.
Air-free, hassle-free laminator
Laminating in a vacuum makes it difficult for bubbles to form in the workpiece. It is ideal for attaching film to workpieces, such as fine patterns, where bubbles are prone to occur.
Introducing the comprehensive catalog of the pioneer of laminators, the MCK Laminator!
We would like to introduce the comprehensive catalog of MCK laminators. It features a wide range of laminators primarily for the electronics industry (related to printed circuit boards and IC packaging) and the FPD industry (related to flat panel devices). For more details, please contact us or download the catalog.
The real-time laminator has been renewed and is back. Laminated labels are issued on the spot, one by one, for the necessary data.
● Up to three locations on a single label can be laminated in any position and size. ● Strong adhesion with thermal lamination. ● Ideal for long-lasting, abrasion-resistant, chemical-resistant, and weather-resistant labels. ● Equipped with a high-speed controller with a 32-bit RISC CPU.
Comprehensive catalog giveaway for winders, slitters, and laminators for functional films.
This catalog is a comprehensive catalog of winders, slitters, and laminators handled by Fujitetsukōsho, a specialist in web handling. It introduces products such as winders for solar cell back sheets, slitters for color filters, and winders for capacitor films. Additionally, it lists applications and resins for optical films, electronic materials, and industrial films. [Featured Products (Excerpt)] ■ Winder for solar cell back sheets ■ Winder for solar cell encapsulation sheets ■ Winder for capacitor films ■ Winder for separator films ■ Slitter for release films for display materials *For more details, please refer to the PDF document or feel free to contact us.
Solvent-free, environmentally friendly new generation wrapping machine.
□ Equipped with a variable width coating head, making it easy to adjust the coating width. □ Pursuing operability, the elevation and application of the head have been automated. □ The backup roll method has achieved stable hot melt application.
Proper laminating is possible with the positioning method! Compact-sized manual laminator.
The "manual laminator" is a device that bonds membranes, absorbent pads, conjugate pads, sample pads, etc., to backing cards. The component set stage allows for proper bonding due to its spring step positioning method. Additionally, we also offer a "robot cylinder type laminator" that allows for free changes to the bonding pattern in 0.1mm increments. 【Features】 ■ Compact size (custom settings according to the workpiece) ■ Proper bonding is possible due to the spring step positioning method of the component set stage ■ Aluminum (anodized) plate ■ Special slit vacuum suction method ■ Utility: Vacuum approximately 60L/min, 0.07 MPa *For more details, please refer to the PDF document or feel free to contact us.
We accept design sales! From coating machines in the 500mm width class to auxiliary equipment such as pressure tanks.
【About the Design and Sales of Test Equipment】 We can accommodate everything from coating machines in the 500 mm width class from test coaters, slitting machines for processing coating rolls, sheet cutters, calenders for post-processing, thermal lamination test machines, to tanks for reduced pressure degassing and pressurized liquid delivery. ▼Example of Designed and Sold Equipment: The thermal lamination machine "HL-400" is designed according to customer specifications, achieving short delivery times and low prices. 【Features of the Thermal Lamination Machine】 - Compatible with sheet and roll formats. - Equipped with heaters on rubber rolls for heating. Our design and sales of test equipment include: ■ Design tailored to customer requirements and budget. ■ Proposals for test machines suitable for the customer's process from prototypes developed in-house. ■ Achieving design according to specifications, short delivery times, and low prices. *For more details, please refer to the PDF materials or feel free to contact us.
Laminator for the electrical and electronic field
This is a device for laminating various electric/electronic materials into base materials (in roll, sheet, and temporary forms). Features: - Laminates the target using a pressure roller under various conditions - The arrangement of heating and pressure rolls can be customized - Pressure range: 0 to 10 kg (compatible with air cylinders, weights, and various hydraulic options) - Heating temperature: room temperature to MAX 200℃ Additionally, thanks to our extensive experience in FA/CIM support, we can simultaneously build upstream/downstream supply transport, loaders/unloaders, etc. We contribute to your labor-saving and significant improvements in production efficiency.
NC Laminator
It is a device for attaching films (such as protective films) to glass substrates and the like. By inputting numerical values for film length and lamination speed, it is possible to attach films at any desired film length and lamination speed.
Continuous Precision Bonding Device (Optical Film, etc.) Laminator
Our company designs and manufactures dedicated equipment. We also design and produce various devices for precision lamination according to customer requirements. We can accommodate any form, including sheet-to-sheet, sheet-to-roll, roll-to-roll, film-to-film, film-to-glass, and glass-to-glass. Below is an example of equipment for roll-to-sheet lamination: 1. Target Work 1-1. Sheet: MAX 1600 × 1100 mm 1-2. Roll: MAX W1100 mm 2. Cycle Time: 15 seconds per sheet 3. Lamination 3-1. Lamination Method: Roller 3-2. Lamination Accuracy: Within ±0.5 mm 4. Functions 4-1. Release: Both sheet side and roll side have release functions 4-2. Cutting: Shear blade 5. Stock: Automatic switching between double stockers for sheet supply and finished products 6. Cleanliness: C100 or below on the work surface (lamination area)
Laminating equipment compatible with a variety of films and glass.
In recent years, we have successfully commercialized not only laminating machines but also slitting and cutting machines, as well as automated machinery. We provide integrated production from design to manufacturing. We have manufactured numerous processing and production machines to date. We also accept custom-made line consultations for customers, not limited to laminating. Additionally, we have dozens of machines for test processing, allowing for repeated experiments to select models and functions. Please feel free to consult with us.
We work in a wide range of fields, including paper, film, textiles, leather, wood, metal, and more.
Mushashino Kikai Co., Ltd. started with the "Laminator," the origin of our business, and its history began with the production of Japan's first domestic extruder laminator. We have also worked on large machines (roll width 4000 mm) and the first domestic co-extruder, continuously challenging ourselves with many new technologies. Our fields of expertise are diverse, including paper, film, textiles, leather, wood, and metals. 【Specifications】 ○ Lamination section: Cooling roll diameter max φ900 ○ Winder: max φ2000 ○ Co-extruder: 3 types, 5 layers ○ Single-layer extruder ○ Feed and sand feed: Shaftless, A/B axis arm individually movable For more details, please contact us or download the catalog.
Choice of Safety and Trust: Nisshinbo Mechatronics' Laminators Supporting Long-term Partnerships
The laminator from Nisshinbo Mechatronics is a processing device that supports the encapsulation process of next-generation solar cells, including silicon-based solar cells and perovskite solar cells. Our advanced lamination technology achieves uniform and stable encapsulation quality for solar cells, supporting long-term durability. We provide cutting-edge solutions that adapt to diverse materials and structures, meeting a wide range of needs from research and development applications to mass production processes. We have established a consistent support system from research and development to mass production, backing our customers' businesses with reliable quality and ongoing support. We go beyond merely providing equipment, building long-term partnerships with our customers while offering peace of mind and trust. *For other functions and details, please download the PDF or contact us.*
A compact model that can be heated and fits in a glove box! For verification purposes of organic thin-film devices.
The "MHL-50" is a compact heat roll laminator that fits within a 250mm square and can heat up to 120°C. It can be used in specialized environments such as glove boxes and is suitable for research and development as well as prototype manufacturing of organic thin-film devices. We are currently offering a comprehensive catalog featuring evaluations of organic EL and related devices, including basic performance verification! You can view it by clicking "Download" below. 【Features】 ■ Temperature adjustment from 50 to 120°C ■ Compact tabletop size of 250(W) × 250(D) × 180(H) mm ■ Usable with a 100V power supply ■ Comes with one sample stage of any size between 20□mm and 40□mm *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
A device that can automatically laminate PP films and similar materials using thermoplastic adhesives onto paper up to a maximum size of B2 (one side).
The fully automatic B2 size single-sided laminator Europa is a device used to laminate PP films and other materials with thermoplastic adhesives onto one side of paper. ■ Compact design focused on ease of use ■ Fully automatic processing achieved through centralized operation from the operation panel ■ Air suction feeder enables stable long-term supply of large quantities and various types of paper
A device that can automatically laminate PP films and similar materials using thermoplastic adhesives onto paper up to a maximum size of B3 (one side).
The fully automatic B3 size single-sided laminator Neptune is a device for laminating PP films and other materials using thermoplastic adhesives onto one side of paper. ■ Compact design focused on ease of use ■ Fully automatic processing achieved through centralized operation from the operation panel ■ Air suction feeder enables stable long-term supply of large quantities and various types of paper
A very compact shape with a total length of 12,500mm and a height of 4,000mm (when opening and closing the dryer)!
The "LX-III" is a dry laminator that achieves a slim and compact design based on space-saving solutions, delivering performance that exceeds traditional models even in narrow spaces. By not adopting an accumulation method, we have addressed the weakness of being unable to perform stationary paper cutting by reducing tension fluctuations with our unique pendulum-style clear cutter, which also minimizes wrinkles in the roll core. Additionally, we have implemented our unique pendulum-style cutter for paper splicing, which reduces tension fluctuations during the splicing process. 【Features】 ■ Compact ■ Reduced loss during paper cutting and splicing ■ User-friendly *For more details, please download the PDF or feel free to contact us.
Coating and bonding integrated on the desktop! Domestic products by a mass production equipment manufacturer.
"Lamico" is a desktop laminator that can bond not only flat surfaces but also rough surfaces, uneven objects, and those with varying curvatures, regardless of shape. The know-how cultivated from producing equipment for large-scale factory production lines is condensed into this compact desktop product. You can experience high-spec industrial quality from a trusted domestic manufacturer. 【Features】 ■ Bonds materials of various shapes ■ Usable for applying and adhering various liquid resins ■ Operation and settings are done via a tablet device *For more details, please download the PDF or feel free to contact us.
