We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for MILL.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

MILL(1000) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.

MILL Product List

31～60 item / All 244 items

Displayed results
Crusher Hammer Mill

Crusher Hammer Mill

All types of dry materials can be crushed! Any raw material that can be broken with a hammer can be crushed.

The hammer mill is a grinding machine capable of coarse to fine grinding by changing the mesh screen. It crushes materials through the impact of swinging hammers. It can grind a wide range of dry materials. In addition to powdering experimental samples, it can also be used as a small-scale production facility. Its high versatility and large input size allow for grinding from coarse to fine. It is used for general food materials, ores, shells, wood, traditional Chinese medicine, and more. 【Features】 - Accurate grinding particle size can be achieved by selecting the screen. - Suitable for all raw materials that can be broken with a hammer. - Moist raw materials cannot be ground. - Capable of grinding several kilograms per hour (varies by material). - Fineness after grinding: 100µm to several mm. For more details, please contact us or download the catalog.

  • Crusher
  • Fine grinding machine
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Experimental Grinding Machine "Retsch Cross Beater Mill SK 300"

Experimental Grinding Machine "Retsch Cross Beater Mill SK 300"

Adjustable screen and rotation speed, suitable for everything from coarse crushing to fine grinding! For medium-hard and brittle samples!

The "Crossbeat Mill SK 300" is a grinding machine that can perform coarse to fine grinding of medium-hard and brittle samples by adjusting the screen and rotation speed. It is capable of batch or continuous grinding. The rotation speed can be adjusted between 2,000 rpm and 4,000 rpm, allowing for condition settings tailored to the sample. It can be used for sample preparation in laboratories, as well as for prototype production in pilot plants and production facilities. 【Features】 - High processing capacity suitable for batch use - Variable rotation speed: accommodates a variety of applications - Final particle size determined by selecting screen hole sizes from 0.12 to 10 mm - Fixed blades, rotor, and cassette can be removed and attached without tools - A wide range of applications supported by abundant accessories - Equipped with a motor brake - Central locking system - Cyclone kit (optional) to promote sample discharge within the grinding chamber *For more details, please refer to the PDF document or feel free to contact us.

  • 14acf9d1473927f289aa39f9602a9d58.png
  • Crusher
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Taper Neck Ball End Mill 'DCTNB'

Taper Neck Ball End Mill 'DCTNB'

Two-blade diamond-coated tapered neck ball for graphite electrode machining.

We handle the diamond-coated two-flute tapered neck ball end mill 'DCTNB' from Union Tool Co., Ltd. The tapered neck shape improves rigidity, achieving high efficiency and high precision machining. Additionally, the adoption of a unique diamond coating suitable for graphite machining provides excellent wear resistance. 【Lineup (Ball Radius R0.5)】 ■DCTNB 2010-200-1.8 ■DCTNB 2010-250-1.8 ■DCTNB 2010-400-1.8 ■DCTNB 2010-600-1.8 ■DCTNB 2010-700-1.8, etc. *For more details, please download the PDF or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard End Mill "2-Flute Diamond Coated EM"

Super Hard End Mill "2-Flute Diamond Coated EM"

Compatible with composite material processing! Diamond-coated two-flute carbide end mill.

The "2-Blade Diamond Coated EM" is a product handled by BBK Company, which specializes in the manufacturing of precision cutting carbide tools, precision molds, and the production and sale of press parts. By coating diamond crystals onto a special carbide material, it achieves surface hardness comparable to natural diamond while maintaining a blade shape focused on cutting performance, making it suitable for graphite, aluminum alloys, copper alloys, as well as composite materials like CFRP and GFRP. 【Features】 ■ 2-blade pin angle designed for groove, Z, and side processing in medium/fine machining ■ Diamond coating ■ Compatible with processing of graphite, aluminum alloys, copper alloys, CFRP, and composite materials ■ High hardness coating ■ Twist angle of 30° ＝＝＝＝＝ For more details, please contact us＝＝＝＝＝ TEL 044-811-0065 FAX 044-811-0925 Contact: Kawaguchi, Kamimoto

  • Other cutting tools
  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
X5070 Blue Coating Carbide Solid End Mill G8A01

X5070 Blue Coating Carbide Solid End Mill G8A01

High wear resistance and good surface finish! Two-flute neck type end mill.

We handle the blue-coated carbide solid end mill "X5070." The 'G8A01 (cylindrical shank)' is a two-flute, neck-type end mill. It boasts high wear resistance and is suitable for dry cutting and high-speed cutting due to the combination of newly developed base material and coating. 【Features】 ■ For high-hardness material processing ■ Suitable for dry cutting and high-speed cutting ■ Good surface finish ■ For high-precision machining ■ High wear resistance *For more details, please refer to the PDF document or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Experimental Grinding Machine LECHE Swing Hammer Mill HM200

Experimental Grinding Machine LECHE Swing Hammer Mill HM200

It can process samples up to 100mm and can grind them down to 0.8mm depending on the properties of the sample.

The Letches Swing Hammer Mill HM200 has a horizontally rotating shaft in the crushing chamber, to which 10 freely swinging hammers are attached. These hammers crush the sample at high speed within the crushing chamber. Unlike fixed hammers, swing hammers minimize the risk of the machine getting blocked and reduce wear. The crushing particle size can be adjusted using a screen (40mm to 2mm) mounted at the bottom of the crushing chamber.

  • Crusher
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bead mill "Nanoparticle grinding and dispersion processing"

Bead mill "Nanoparticle grinding and dispersion processing"

Stir the beads to finely grind and disperse the particles in the slurry! The crystallinity and composition of the particles do not change, allowing the properties of the particles to be maintained.

This is an introduction to bead mills for nanoparticle grinding and dispersion processing. 【Features】 ■ Stirring beads to finely grind and disperse particles in the slurry ■ Mild dispersion: A dispersion that maintains the properties of the particles without changing their crystallinity or composition. Controlling dispersion energy during the processing is crucial. ○ Yttrium Oxide Untreated 30-50μm → After processing < 200nm ○ Barium Titanate Untreated 210nm → After processing 70-100nm → Thin film formation (film thickness) 200-300nm * For more details, please request materials or view the PDF data available for download.

  • Other processing machines
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ball End Mill for Difficult-to-Cut Materials 'JMB PLUS'

Ball End Mill for Difficult-to-Cut Materials 'JMB PLUS'

Consideration for chip removal! Introducing a ball end mill suitable for difficult-to-machine materials along with processing examples.

"JMB PLUS" is a ball end mill designed for machining difficult-to-cut materials with PT coating. By giving the R part a slightly stronger twist, it achieves excellent cutting performance near the center. It features a special shape designed for effective chip removal. 【Processing Example】 ■ Tool Used: JMBPR-7 ■ Work Material: SS400, FCD ■ Processing Details: Contour finishing ■ Cutting Conditions ・ Spindle Speed: 5000 min-1 ・ Cutting Speed: V=251 m/min ・ Feed Rate: 2000–2300 mm/min ・ Depth of Cut: ae=0.1–0.15 mm, ap=0.1–0.15 mm *For more details, please refer to the PDF document or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Automatic Discharge Ball Mill 'AXB-100/AXB-50'

Automatic Discharge Ball Mill 'AXB-100/AXB-50'

Automatic discharge ball mill for separating crushed/mixed materials and media in a sealed container.

The "AXB-100" is a ball mill that allows you to move the discharged sample using the included lift-equipped cart. It collects only the sample into the receiving container while rotating with a mesh placed between the container and the pot. Additionally, we also offer the "AXB-50" with a capacity of 50L. 【Features】 ■ Samples are discharged into the receiving container and can be transported as is ■ Separation of balls and samples using a mesh ■ Dust prevention measures ■ Compatible with wet and paste specifications For more details, please refer to the catalog or feel free to contact us.

  • Crusher
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard End Mill Unimax Series 'CXRS/CXLRS'

Super Hard End Mill Unimax Series 'CXRS/CXLRS'

A carbide end mill compatible with a wide range of work materials from carbon steel to hardened steel (55 HRC).

We handle the Union Tool Co., Ltd.'s carbide end mills from the Unimax series, 'CXRS/CXLRS.' The seamless corner R shape significantly reduces cutting resistance. The unequal division and unequal lead shapes, along with the positive rake angle cutting edge design, enable high-efficiency machining for side processing. 【Lineup (CXRS)】 ■CXRS 5030-05-0600 ■CXRS 5030-05-0900 ■CXRS 5040-05-0800 ■CXRS 5040-05-1200 ■CXRS 5040-10-0800, etc. *For more details, please download the PDF or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard End Mill | High Efficiency | 'RF 100 Diver'

Super Hard End Mill | High Efficiency | 'RF 100 Diver'

Over 125 years of establishment, a German global manufacturer has developed the high-efficiency carbide end mill 'RF 100 Diver'.

The 'RF 100 Diver' demonstrates outstanding chip removal performance and tool life in milling various workpieces. It can perform drilling, ramping, and grooving with a single tool, reducing both the number of tools used and setup time. It enables a 40% longer tool life compared to conventional products. It is suitable not only for general steel but also for stainless steel and heat-resistant steel, making it ideal for machining tough materials. The type with coolant holes effectively protects the cutting edge and cools the machining area during milling in the radial direction and during drilling in the axial direction, while also ensuring accurate chip removal. *For more details, please refer to the PDF document or feel free to contact us.*

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rental equipment

Rental equipment

Various rental equipment such as planetary ball mills, cryogenic grinders, and vibrating pot mills.

Planetary Ball Mill "LP-M2", "LP-1", Freezing Crusher "TKS-1", Ultrasonic Sifter "MSS-75", Vibrating Mini Cup Mill "MC-4A", Vibrating Pot Mill "MZ-100", Tabletop Ball Mill Stand "MF-1", "MF-101", Ball Mill Stand "BMU-100", "MF-1UD", Jaw Crusher (for coarse crushing, experimental/production machine) "PEX-200", Radiation Dosimeter "DoseRAE2", and many others. For more details, please contact us.

  • Fine grinding machine
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tabletop Small Batch Bead Mill Easy Nano "RMB2 Model"

Tabletop Small Batch Bead Mill Easy Nano "RMB2 Model"

<Must-see for first-time users of bead mills> A standard model of a compact tabletop lab machine. Just add slurry and beads and it can perform grinding and dispersion processing.

The Easy Nano "RMB2 Type" is a compact batch-type bead mill that can handle a wide range of applications from basic experiments to advanced uses involving bead milling. It allows for easy experimentation and can process small quantities, is compact and space-saving, and does not require special maintenance. Furthermore, the initial and running costs are among the lowest in its class. This device is available for rental and testing. <Recommended for> - Those using a bead mill for the first time. - Those who want to handle a bead mill easily. 【Features】 ■ Capable of processing small amounts from 30ml. *Ideal for expensive slurries. ■ Disassembly and assembly in 30 seconds for easy cleaning. ■ Bead diameters from φ0.03 to 2.0mm can be used. ■ Operates on a 100V power supply. ■ Can be installed in the space of an A3 sheet of paper. ■ Explosion-proof options available. *For more details, please refer to the catalog or feel free to contact us.

  • Fine grinding machine
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Experimental Grinding Machine "Retsch Vibratory Disc Mill RS 300 XL"

Experimental Grinding Machine "Retsch Vibratory Disc Mill RS 300 XL"

Crush medium-hard, hard, brittle samples, and fibrous samples in a short time! Supports simultaneous processing of multiple samples.

The "Vibration Disk Mill RS 300 XL" can grind medium-hard, hard, brittle samples, and fibrous samples to an analyzable particle size in a short time while minimizing sample loss. It also supports simultaneous processing of multiple samples (1 to 4). With a robust universal drive shaft, it can handle grinding sets of up to 30 kg. Samples are ground in a sealed state, allowing for safe operation. Designed to be robust, it is used in a wide range of fields including geology, mining, metals, cement, and thermal power plants. It demonstrates excellent performance in achieving final particle size and grinding processing time for sample preparation in spectroscopic analysis. 【Features】 - Uniform and reproducible sample preparation enabled by the universal drive shaft - Automatic reversal function (left/right rotation) - Interval setting function (automatic start/stop) - Choice of materials for grinding sets - Sealed/soundproof grinding chamber - Grinding jars are securely fixed with pneumatic pressure for convenience and safety - Optional automatic lifter makes it easy to set heavy grinding jars *For more details, please refer to the PDF document or feel free to contact us.

  • 851a7ba19ce5d8073db36c38ccd11ae2.png
  • Crusher
  • Homogenizer
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
End Mill Machining Case for Standing Walls: "Machining of St 52/3"

End Mill Machining Case for Standing Walls: "Machining of St 52/3"

Significantly improved efficiency possible! Processing example of St 52/3 using end mills for vertical walls.

Here is a case study of machining 'St 52/3 (equivalent to STKR490)' using an end mill for vertical walls. The cutting tool used is the "HAM40-1571 finishing end mill," with a blade diameter of φ20mm and 8 blades. 【Case Details】 ■ Material: St 52/3 (equivalent to STKR490) ■ Material tensile strength: 510-610N/mm² ■ Challenge: Workpiece side edge milling ■ Machining machine: Hermle C1200 V ■ Adapter: HSK 63 For more details, please refer to the catalog or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard End Mill | High Efficiency | 'RF 100 Speed'

Super Hard End Mill | High Efficiency | 'RF 100 Speed'

"RF 100 Speed," a high-efficiency carbide end mill developed by Gühring, which has been expanding globally from Germany for over 125 years.

RF 100 Speed," excels in HPC milling and trochoidal machining with steel, stainless steel, and heat-resistant steel, offering excellent machining stability with a high chip removal rate. It enables high-efficiency roughing with a high cutting depth. The unique design with deeper grooves at the tip balances chip evacuation performance and tool rigidity. A wide chip pocket is provided at the bottom edge, allowing stable operations in the axial direction, such as ramping and helical machining. *For more details, please refer to the PDF document or feel free to contact us.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tabletop Ball Mill "BM-15"

Tabletop Ball Mill "BM-15"

Basic one-way rotation type! A tabletop ball mill that can be used over a wide range.

The "BM-15" is a basic tabletop ball mill with a one-way rotation type that can be easily used over a wide range. Due to its simple structure, there is almost no concern about breakdowns. The variable speed control via inverter frequency allows for easy changes in rotation speed. The spacing between the rollers that hold the pot can be adjusted, accommodating pots with a maximum diameter of 300 mm. We also offer a model with a safety cover, the "BMC-15," for the tabletop ball mill. 【Features】 ■ Easy to handle ■ Low breakdown rate ■ Adjustable roller spacing ■ Variable rotation speed For more details, please refer to the catalog or feel free to contact us.

  • Crusher
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-efficiency aluminum processing end mill "Prism series"

High-efficiency aluminum processing end mill "Prism series"

Special bottom blade shape! A tool that also supports environmentally friendly dry processing.

The "Prism series" is a three-flute end mill developed specifically for the machining of non-ferrous metals such as aluminum alloys and aluminum die-cast. It achieves excellent cutting performance for side machining, groove machining, and dry cutting in the Z direction, along with high machining precision. We offer three types: "Carbide 3-Flute Square," "Carbide 3-Flute Radius," and "Carbide 3-Flute Ball." 【Features】 ○ Ultra-thin DLC coating → Achieved thin film through a unique coating process ○ Special bottom blade shape → The bottom blade edge is curved, producing a glossy finish ○ Cutting edge design optimized for high efficiency ○ Compatible with environmentally friendly dry machining (φ1.0 to φ20.0) For more details, please contact us or download the catalog.

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lab Mill LM-05 fine-grinding machine

Lab Mill LM-05 fine-grinding machine

This hammer-type fine-grinding machine boasts 16,000 min-1, which is best in class.

This tabletop hammer-type grinding machine is designed to carry out grinding experimentation in extremely small quantities (up to 100 g). The machine has the same grinding performance as large machines (periphery speed of hammers: 100 m/sec). Thanks to the direct-drive mechanism, the machine is quiet and compact. *For more details, please contact us.*

  • Crusher
  • Fine grinding machine
  • Fine grinding machine
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plate mill "UC Series"

Plate mill "UC Series"

One-pass machining of 500mm wide workpieces is possible! Plate mill equipped with a large-diameter face mill cutter.

The "UC Series" is a plate mill equipped with a ø525mm large diameter face mill cutter capable of processing 500mm wide workpieces in a single pass. The built-in material thickness measurement device measures the thickness of the material before cutting, automatically determines the number of cuts, and starts the processing. With the touch panel-based simple interactive input system TAKEDA E.C.O.S., you can easily perform high-precision surface machining by selecting pre-registered cutting conditions and inputting the material dimensions and finishing thickness. 【Features】 ■ Equipped with a φ525mm face mill cutter ■ Material thickness measurement device ■ Tool edge measurement device ■ Equivalent to No. 60, ultra-thick spindle ■ Intuitive operability For more details, please refer to the catalog or feel free to contact us.

  • Other machine tools
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-compact NC milling machine CVN-2000: Micro Mill

Ultra-compact NC milling machine CVN-2000: Micro Mill

Ultra-compact NC milling machine. A precision small parts processing machine in a desktop size!

Introducing the ultra-compact machining equipment, the ultra-compact NC milling machine "Micro Mill." 【Features】 ● Desktop-sized precision small parts processing machine! Width 374mm, Depth 370mm, Height 642mm ● Capable of processing a wide range of materials from resin to mold materials ● CAD/CAM compatible ● Operates on AC100V ● Spindle can be upgraded to a high-speed rotation motor ◆◇ For more details, please request materials or download the catalog ◇◆

  • Milling machine
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Coffee mill (coffee grinder) (lead mill)

Coffee mill (coffee grinder) (lead mill)

RG300 boasts overwhelming extraction performance with its 3-blade cutter.

The RG300 boasts overwhelming extraction performance with its three-stage cutter. Its elegant and transparent taste and aroma harmonize beautifully, with complex flavor components clearly separating over time, yet rising to form a cohesive whole, akin to the highest level of orchestration. Just as the sounds produced by each instrument weave together to create a grand performance, the RG300 highlights the various components that make up coffee beans while presenting an unknown world of flavors. In this upgrade, we have introduced a new casing design that matches any store's interior, and we have enlarged the coffee receiving box for improved usability. Particularly in cold brew coffee, where delicacy is most required, it brings about a refreshing separation of flavors and aromas.

  • Crusher/Mill
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Kitamura Corporation "List of Owned Equipment"

Kitamura Corporation "List of Owned Equipment"

Over 130 crushing machines and auxiliary equipment available! Flexible combinations are possible!

At Kitamura Co., Ltd., we own auxiliary equipment such as crushers, classifiers, and recovery machines from over 10 manufacturers. Since we are not a powder processing equipment manufacturer, we can procure a wide range of powder processing equipment beyond the scope of equipment manufacturers, allowing us to meet high-level demands that other competitors cannot. We will select the optimal equipment from our extensive inventory of powder equipment and prepare a dedicated crushing plant in a processing room specifically for our customers. Additionally, the equipment and processing room used will be thoroughly cleaned to ensure that the next customer can use them with peace of mind. 【Features】 ■ Over 10 manufacturers ■ More than 130 crushers in our inventory ■ Well-equipped auxiliary equipment For more details, please refer to our catalog or feel free to contact us.

  • Crusher
  • Fine grinding machine
  • Analytical Equipment and Devices
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard End Mill | Soft Steel / High Alloy Steel | 'RF 100 Sharp'

Super Hard End Mill | Soft Steel / High Alloy Steel | 'RF 100 Sharp'

Over 125 years of establishment, a German-based global manufacturer has developed the carbide end mill 'RF 100 Sharp' for soft steel, high alloy steel, and heat-resistant alloys.

Specially designed for milling processing of soft steel, high tensile strength steel, and high alloy steel, the 'RF 100 Sharp' takes into account measures against adhesion to cutting edges and breakage due to chip clogging. It features a strong 12° radial rake angle, significantly reducing cutting resistance when processing these materials. It is widely applicable for grooving, rough machining, ramping, helical machining, and finishing. It can be used with equipment ranging from high-rigidity CNC milling machines to low-rigidity lathes. It is particularly suitable for processing soft steel, high tensile strength steel, and high alloy steel. *For more details, please refer to the PDF document or feel free to contact us.*

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
End mill | Micro machining | 'RF100 MicroDiver'

End mill | Micro machining | 'RF100 MicroDiver'

Over 125 years of establishment, a German-based global manufacturer has developed the ultra-hard end mill for micro machining, 'RF 100 Micro Diver'.

The 'RF 100 Micro Diver' for micro-machining further expands the 'RF 100 Diver' series, which demonstrates outstanding chip removal performance and tool life in milling various workpieces. It allows drilling, ramping, and groove processing with a single tool, reducing both the number of tools used and setup time. It accommodates a wide range of processing methods for diverse work materials. With a new design that combines innovative groove shapes and tool rigidity, it achieves high-speed performance and machining depth that break away from conventional micro-machining norms. Equipped with a coolant duct (GÜHROJET internal lubrication system) that directly supplies coolant to the cutting edge, chip removal is very smooth. *For more details, please refer to the PDF document or feel free to contact us.*

  • End Mills
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluidized bed type and fixed type classification mechanism jet mill "Jet Mill Series"

Fluidized bed type and fixed type classification mechanism jet mill "Jet Mill Series"

Ultimate small particle size created by jet streams! Jet mill equipped with high-performance classifier.

The Jet Mill series "JEDI" is a fluidized bed jet mill uniquely developed by Airstec. It is equipped with a high-performance classifier, allowing for the production of ground materials with small particle sizes and a sharp particle size distribution. We also offer the counter-type jet mill "JEDI-SC," which features a fixed classification mechanism. 【Features of JEDI】 ■ Small particle size grinding and sharp particle size distribution achieved with a high-performance classifier ■ Capable of grinding heat-sensitive materials ■ Contamination-free ■ GMP compliant (optional) For more details, please refer to the catalog or feel free to contact us.

  • Crusher
  • Other powder equipment
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Joke Crusher (Coarse Crushing for Experimentation/Production Machine) "PEX-200"

Joke Crusher (Coarse Crushing for Experimentation/Production Machine) "PEX-200"

The joke crusher "PEX-200" is for rental only and is not for sale.

The joke crusher (for coarse crushing, experimental/production machine) "PEX-200" can process materials depending on the experiment, but if you want to reduce the maximum input size of 50mm to a final particle size range of 1 to 10mm, the processing capacity will be 48 to 650kg per hour, so please use this as a reference. The power supply is 200V three-phase, 50/60Hz, 1.5kw, and the external dimensions are W418×D720×H560mm. For more details, please contact us.

  • Rental/lease
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Universal Airflow Small Micro Grinding Machine Minakron Mill Mini / Mill 400

Universal Airflow Small Micro Grinding Machine Minakron Mill Mini / Mill 400

Compact design! A fine grinding machine capable of crushing materials into tens of microns.

The Minakron Mill Mini is a compactly designed universal air flow micro pulverizer suitable for small quantities and a variety of products, capable of processing a wide range from grains to seafood. It can grind materials down to several tens of microns while allowing for easy disassembly and washing of the contact parts. The Minakron Mill 400 minimizes thermal degradation of materials due to the airflow from the grinding chamber to the collection unit, and its centrifugal classification function allows for a sharp particle size distribution without the need for a classification device. 【Features】 [Minakron Mill Mini] ○ Compact design ○ Various grinding products [Minakron Mill 400] ○ Minimizes material degradation ○ No classification device required For more details, please contact us or download the catalog.

  • Crusher
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Experimental Grinding Machine "Retsch Planetary Ball Mill PM100"

Experimental Grinding Machine "Retsch Planetary Ball Mill PM100"

Crushing and mixing samples from soft to ultra-hard, including brittle and fibrous materials! Suitable for dry and wet processes!

The "PM100" is a planetary ball mill capable of grinding and mixing samples ranging from soft to super hard, including brittle and fibrous materials. It can be used for both dry and wet grinding, achieving uniform grinding down to submicron levels in a short time. By combining orbital and rotational motion, it demonstrates powerful grinding capabilities that are impossible with conventional ball mills. An optional internal pressure and temperature measurement system called "PM GrindControl" is available. 【Features】 ■ Powerful and rapid grinding down to submicron levels ■ High reproducibility by controlling energy and speed ■ Capable of long continuous operation ■ Supports both dry and wet grinding methods ■ Safety slider that prevents operation unless the clamp is attached ■ FFCS technology absorbs equipment vibrations, making it safe to place on experimental tables ■ Counterbalance mounted on an inclined rail to correct the height of the jar's center of gravity ■ Interactive condition input with a single button and LCD screen ■ Rear fan in the grinding chamber for air cooling of the grinding jar ■ Up to 10 grinding conditions can be registered ■ Grinding start time can be set with a timer *For more details, please refer to the PDF document or feel free to contact us.

  • e022f5737d2c65881b0844f035f9a7d0.png
  • 32a8c26ddbe2482973c6a1984ede5075.png
  • Crusher
  • Homogenizer
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Experimental Grinding Machine "Lecce Cutting Mill SM 300"

Experimental Grinding Machine "Lecce Cutting Mill SM 300"

Powerful motor for strong crushing! Suitable for soft to medium-hard materials, elastic items, and mixtures!

The "Cutting Mill SM 300" is a powerful cutting mill that can crush hard samples that other cutting mills cannot. With enhanced drive components featuring high torque performance from a 3kW motor utilizing RES technology, it efficiently crushes heterogeneous mixtures such as waste and electronic components. Depending on the sample, it can also reach the desired particle size for analysis. 【Features】 ■ Powerful crushing force with a 3kW motor that has high torque performance ■ The rotor speed can be continuously adjusted from 700 to 3,000 rpm, accommodating various samples ■ Efficient crushing with newly designed double-fixed blades ■ Easy cleaning with a rotor that can be removed without tools, a large open crushing chamber, and a surface finish that resists dirt ■ Easily determine the crushing particle size by selecting screens with hole sizes from 0.25 to 20 mm ■ A wide variety of hoppers, collection containers, rotors, and screens available ■ Maximum safety with motor brakes, interlock mechanisms, and a robust frame *For more details, please refer to the PDF document or feel free to contact us.

  • 7ad481540ef5ed027df7db0aa7e0ace5.png
  • 2f93b4f00a6a4fff2df7ccd333ec0b98.png
  • dc04f035e2c48b99b4acd3e5af6c861f.png
  • Crusher
  • MILL

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to MILL

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.