We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for MILL.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

MILL(35) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Aug 20, 2025～Sep 16, 2025
This ranking is based on the number of page views on our site.

MILL Product List

61～68 item / All 68 items

Displayed results
Super Hard Vibration-Resistant End Mill 'AE-VMSS/VMS'

Super Hard Vibration-Resistant End Mill 'AE-VMSS/VMS'

The difference can be understood through groove processing! The fact that burrs are less likely to occur in groove processing is a sign of stable processing.

The "AE-VMSS/VMS" is a light angle type ultra-hard vibration-resistant end mill with an innovative cutting edge designed to machine right angle corners. Poor chip evacuation and high cutting resistance can lead to unstable machining, making it easier for burrs to form. Additionally, we also offer the "AE-VML," which focuses on high-efficiency side cutting, and the "AE-VMFE," designed for vertical wall applications. 【Features】 ■ Positive rake angle ■ High rigidity ■ New groove form *For more details, please download the PDF or feel free to contact us.

  • End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SEC-Sumi Dual Mill DMSL type/DMSW type

SEC-Sumi Dual Mill DMSL type/DMSW type

The long tool projection suppresses chatter in machining, enabling high efficiency!

The "SEC-Sumi Dual Mill DMSL/DMSW type" is a high-efficiency roughing cutter designed for ultra-high feed rates and large depths of cut. With its complex arc-shaped cutting edge, it achieves both a small cutting angle and a large depth of cut. It enables high-efficiency machining with a feed rate of up to 3.5 mm/t per edge. Additionally, even in high-feed machining with a feed rate of 2.0 mm/t or more per edge, it achieves good surface roughness without the need for a wiper insert. 【Features】 ■ Achieves both a small cutting angle and a large depth of cut simultaneously with a complex arc-shaped cutting edge ■ Enables high-efficiency machining with a feed rate of up to 3.5 mm/t per edge ■ Controls cutting resistance in the direction of back force due to the small cutting angle ■ Stable machining even with long tool overhang without chatter ■ Introduction of DMSL type for small diameters ■ Lineup includes cutting diameters from Φ16mm and above *For more details, please refer to the PDF document or feel free to contact us.

  • cutter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
GS MILL Long Neck Carbide End Mill

GS MILL Long Neck Carbide End Mill

A rich selection that accommodates all types of precision machining for molds.

A rich selection that accommodates all fine machining of molds. High precision and long life due to ultra-fine particle cemented carbide and GS coating. Seamless processing with outer peripheral blades achieves ball accuracy of ±5μm. A wide range of products: Series 335 items. Series: GS MILL Long Neck Ball, GS MILL Long Neck 2-Flute, GS MILL Long Neck 4-Flute.

  • End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Epoch D Thread Mill EDT-TH

Epoch D Thread Mill EDT-TH

Achieving threading processing of high-hardness steel! Automation of threading processing through NC.

The "Epoch D Thread Mill EDT-TH" from the ultra-hard threading cutter series is a thread mill that can be used with machines that have low power and small spindle loads. It allows for simultaneous helical drilling and threading, making it suitable for processing where there is little room for hole depth. Additionally, it finely breaks down chips and suppresses tearing and chattering. It is particularly effective for preventing water leaks in pipe threads. 【Features】 ■ Achieves a good machining surface ■ Capable of various threading operations with one tool ■ Can cut threads to the very limit ■ Cutting conditions can be freely set (helical processing) *For more details, please download the PDF or feel free to contact us.

  • Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard Thread Cutting Cutter Series "Epox Red Mill ET-PN"

Super Hard Thread Cutting Cutter Series "Epox Red Mill ET-PN"

Reduce the risk of breakage with excellent chip evacuation! Solve tapping problems with thread mills.

The "Epox Red Mill ET-PN" from the ultra-hard threading cutter series is a thread mill that can perform various threading operations with just one tool. It finely divides chips and suppresses tearing and galling. It is particularly effective for pipe threads in preventing water leaks. Additionally, there is no need to synchronize rotation and feed like with taps. The spindle load is also low, allowing it to be used with low-power machines. 【Features】 ■ Achieves good machining surfaces ■ Capable of various threading operations with one tool ■ Can cut threads to the very end ■ Cutting conditions can be freely set (helical machining) *For more details, please download the PDF or feel free to contact us.

  • Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Pellet mill with automatic remote roll gap adjustment function <gear drive type>

Pellet mill with automatic remote roll gap adjustment function <gear drive type>

Not only livestock feed, but also usable for a wide range of applications such as cat litter, wood pellets, grains, and biomass.

The Kubex5 series SZLH is a multipurpose gear-driven pellet mill characterized by high efficiency and long lifespan. The surfaces in contact with the raw materials are made of stainless steel, and the machine structure design facilitates easy transportation, installation, cleaning, and maintenance. It evenly distributes raw materials across the entire die width, achieving stable shape and quality, while a magnetic strength iron removal plate with a maximum of 3000Gs removes iron powder. The newly released multifunctional version of the same series, AHCX, is optimized for pig and poultry feed production, achieving greater processing capacity. It is equipped with automatic control features such as gap adjustment to prevent roll clogging and slippage, and monitoring of roll speed. Additionally, the integrated design of the die ring and reinforcement ring allows for reduced time and cost for die replacement.

  • AHCX.png
  • Other food machinery

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[JJTOOLS] Cutting tools, ultra-hard end mills, dental end mills

[JJTOOLS] Cutting tools, ultra-hard end mills, dental end mills

Ultra-hard end mills, thread mills, milling, inserts, dental end mills

JJ Series for High Hardness Material Processing (HRc52~68): Features excellent wear resistance due to high-concentration silicon-based coating (Si) treatment. • Suitable for ultra-precision machining with high precision tolerance application. • High density of cutting edges results in superior surface roughness of the workpiece. • Utilizes ultra-fine particle carbide (0.2μm) to demonstrate excellent performance during high-speed cutting. E Series for Powerful Cutting (~HRc52): Features excellent wear resistance due to high-concentration silicon-based coating (Si) treatment. • Designed for a wide range of workpiece processing. • Economical pricing allows for reduction in machining production costs. • Employs high fracture-resistant ultra-fine particle carbide (0.5μm) to minimize end mill breakage.

  • End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Basics and Troubleshooting of Roll Mills for Fine Chemists Learned in Q&A Format

Basics and Troubleshooting of Roll Mills for Fine Chemists Learned in Q&A Format

★Three-Roll Mill Problem-Solving Seminar! ★Covering everything from machine configuration to dispersion and grinding mechanisms!!

Lecturer Naoshi Maeda, Section Manager, Crushing and Dispersion Department, Buerra Co., Ltd. Target Audience: Newcomers to veterans interested in roll mill technology for kneading and dispersion. Venue: Tokyo Metropolitan Industrial Trade Center, Taito Hall Access: Within an 8-minute walk from Asakusa Station on the Tokyo Metro Ginza Line (subway), Asakusa Station on the Tobu Isesaki Line, and Asakusa Station on the Toei Asakusa Line (subway). Date and Time: September 9, 2011 (Monday) 13:30-16:30 Capacity: 20 people. *Please apply early as there may be a rush of applications. Participation Fee: 49,350 yen (including tax and textbook costs) for up to 2 participants from one company. *New members who apply for the first time by August 26 will receive an early bird discount price of 46,200 yen. ◆ Early Bird Discount: Please select "1 slot for 2 people: Early Bird Discount" when registering. ◆ For additional applications from the same organization, an additional 12,600 yen will be charged per person.

  • Company：AndTech
  • Price：10,000 yen-100,000 yen
  • Technical Seminar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to MILL

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.