Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
76～90 item / All 937 items
Assembly hardware suitable for the assembly and reinforcement of corners for the "ABC Channel."
Our "assembly hardware" is designed to fit the dimensions of the "ABC channel," making assembly easy with just a bolt tightening. The material is made of steel plate, finished with trivalent chrome electro-galvanizing. *For more details, please refer to the PDF document or feel free to contact us.
Significant reduction in work costs by collaborating with fans.
The "Fan Terminal Block Mounting Bracket" is a wiring component for ventilation fans. Since it is fastened together with the fan, no additional hole processing for terminal block installation is required. This significantly reduces labor costs and streamlines the terminal block installation process. 【Features】 ■ Significant reduction in labor costs ■ Streamlining of terminal block installation ■ No additional hole processing for terminal block installation required *For more details, please refer to the PDF document or feel free to contact us.
A wide range of sizes to match the mounting hole pitch! You can choose according to your application.
The "Indoor Support Insulator Mounting Bracket" is a mounting bracket for indoor support insulators for busbars and electrical wires within distribution boards. We offer a wide range of sizes to match the pitch of the mounting holes for indoor support insulators. You can select clamps for round wires (high-voltage insulated wires) and busbars (vertical support and horizontal support) according to your application. 【Features】 ■ A wide range of sizes to match various mounting hole pitches ■ Clamps can be selected for round wires and busbars according to application ■ Material: Clamps for round wires (high-voltage insulated wires): made of brass (Note: Only CB-30FJ is made of steel plate) Clamps for busbars (vertical and horizontal support types): made of cast iron and brass *For more details, please refer to the PDF document or feel free to contact us.
Easy installation of protective covers around the power supply area of DIN rail-compatible relays, etc.
The "DH Holder Protective Cover Mounting Type" is a structural material for panels that allows for easy installation of protective covers around the conductive parts of DIN rail-compatible relays by fastening it together with terminal block fixing brackets. Please use it as a mounting base when using protective covers with our DIN rail-compatible relays and similar devices. Custom sizes (height, width) can also be produced. 【Features】 1. By fastening it together with terminal block fixing brackets, you can easily install protective covers around the conductive parts of DIN rail-compatible relays. 2. We also accept orders for sales as a set with mounting brackets. Please add a "T" at the end of the model number when ordering (e.g., DHC-35T). 3. Custom sizes (height, width) can also be produced. *For more details, please refer to the PDF materials or feel free to contact us.
You can easily extend the DIN rail!
【Usage】 This can be used as an extension fitting (joint) for existing DIN rails during on-site modifications. 【Features】 1. No drilling or tapping is required when adding extensions. 2. There are two types available: a straight extension type and a type that can extend 90 degrees forward. *For more details, please refer to the PDF document or feel free to contact us.
Please use it as a mounting bracket for the volume and toggle switches in distribution boards, control panels, and operation panels, as well as for ducts and push-button switches inside the panels.
【TK】Please use it as a mounting bracket for volumes and toggle switches inside distribution boards, control panels, and operation panels. 【DTK】Please use it as a duct mounting bracket inside distribution boards, control panels, and operation panels. 【PBK】Please use it as a mounting bracket for push-button switches. 【VTK】Please use it as a mounting base for volumes and toggle switches. 【TCK】Please use it for mounting DIN standard devices with a 48mm square. 【TCKH】Please use it for mounting DIN standard devices with 48mm or 96mm squares. 【DSK-85】This bracket is ideal for mounting Omron's micro switch "panel-mounted push-button type." *For more details, please refer to the PDF document or feel free to contact us.
Easily attach a commercially available protective cover with one touch! Protect the charging area effortlessly!
【Features】 Please use this as a stand for mounting protective covers on our DIN rail-compatible relays, timers, and small power relays. *For more details, please refer to the PDF materials or feel free to contact us.
A new DIN rail mounting bracket for fuse holders has been created.
【Features】 ■ The bracket can be fixed at any position on the DIN rail by simply tightening one fixing screw. ■ Flat-head screws are used for the mounting screws (the mounting screw holes are processed to be recessed), making the mounting surface flat. ■ Tapping has been done to allow for easy installation of the fuse holder. * For more details, please refer to the PDF document or feel free to contact us.
Dual joint fitting 294-9107.33-10010 one-touch installation
● No screws, nuts, or washers are needed due to the snap-in design. Please refer to the DST series introduction for details. ● Since welding is not required, installation time is significantly reduced, leading to cost savings. ● Two adjacent panels can be joined together.
Joint fitting 294-9003 type with one-touch installation and earth clip included.
● Achieves one-touch installation with sufficient strength. No screws or welding are required. For details, please refer to the DST series introduction. ● Just by installing it, the earth clip scrapes the paint off the mounting surface, allowing the joined panels and fasteners to conduct electricity, functioning as grounding between the panels. ● Can connect two or more adjacent panels.
Easy installation with one hand. Prevents nut detachment with spring force. Reduces the risk of ceiling falls. Also passes tests compliant with NAS3350 standards.
"Instant Lock" is a loose and drop prevention fitting that is suitable for long bolts such as hanging bolts and can be easily attached with just a light force. (Developed by the company Kirii Seisakusho) No tools or special skills are required, and it demonstrates stable performance due to the restoring force of the spring. It has also passed tests using an impact-type vibration testing machine compliant with the NAS3350 standard. It reduces the risk of falling construction materials, including suspended ceilings, and contributes to the safety of workplaces, stores, and residences. Other sizes besides w3/8 are also available, so please feel free to consult us. M8, M10, and M12 have been added. 【Features】 ■ Can be attached and detached instantly with one hand ■ No torque management required ■ Provides a long-term anti-loosening effect *For more details, please refer to the materials. Feel free to contact us with any inquiries.
Leave it to us for anything related to gas chemicals!
Used for pressure boosting device design and manufacturing, pressure resistance and airtightness testing.
With over 200 types and a rich lineup, we provide strong support for piping installation! Multi-layer stacking of different pipe sizes is also made possible with KITO clamps!
This catalog introduces the "Pipe Clamps" handled by Kitou High Pressure. Our piping clamps are made of resin, offering excellent earthquake resistance, oil resistance, and insulation. In particular, the earthquake resistance feature includes ribs at the contact points with the pipes that alleviate vibrations and absorb shocks, protecting the piping. By using them with stainless steel fittings, they not only provide corrosion resistance but also result in a neat finish for piping installation. 【Contents (excerpt)】 ■ Standard Clamps ■ Hard Clamps ■ Stacked Specifications ■ Piping Parts / Others ■ Technical Documents, etc. 《Orders can be placed from just one piece and will be shipped via cash on delivery.》 If you need a quick estimate, please check the ordering method listed in the catalog and contact us. ★ If you have any questions, please feel free to consult with us. *For more details, please refer to the PDF document or feel free to contact us.
Supports high-frequency signal measurement with an oscilloscope probe.
Test clips for oscilloscope probes, ideal for checking the operation of surface-mounted ICs.
