Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
61～75 item / All 941 items
●Single pipe truss beams can be assembled with freely adjustable height, width, length, and pitch.
●It does not sag even when a load of 40kg (2 pieces of 20kg copper) is applied. ●The flange bolts and flange nuts are included with M4250SPJ-JTFS.
Single pipe fittings that allow ropes or chains to be stretched on single pipes or single piles.
● It can be easily installed by simply tightening the eye bolt and securing it with a nut. ● There are two types: single-sided ring type and double-sided ring type. ● It can be easily attached to a single pipe post, allowing various ropes and chains to be stretched, expanding the various uses of the single pipe post. * Please check the size when using a chain.
A single pipe joint that allows you to freely extend the length of single pipe piles or single pipe stakes on site!
This is a single pipe joint that connects single pipe piles and extension single pipes, allowing the single pipe piles to be extended to a length suitable for the ground conditions and site environment. It ensures that the single pipe piles reach a solid support layer, enabling even long single pipe piles to be safely driven into the ground by one person with both feet always on the ground.
By attaching it to the front side of the pallet, it prevents the pallet from falling.
- The stopper part that stands up at the front of the pallet tilts parallel to the pallet when pushed from the front by a forklift and is fixed in place by a magnet. - The tilted plate can be returned to a state where the stopper is effective by either lifting it by hand after work or by using the tips of the forklift's forks to lift it. - The M227FP-5050NKPT is a type that can be easily installed just by covering it over the rack frame. - The M227FP-101KPT is mounted by covering it over the frame and is used after being secured with screws.
Since seal tape wrapping and liquid gasket application are unnecessary, it improves construction efficiency on-site. It prevents inconsistencies in wrapping, insufficient application, and excessive application due to differences in workers' experience.
In the pneumatic joint industry, our pre-coated threaded joints, which hold an 80% market share (according to our own research), are coated with a fluororesin-based sealant on the PT thread section in advance. On-site, these joints demonstrate sealing performance simply by being tightened, using the processed joints. They are effective not only for leak prevention but also for preventing loosening, and due to the fluororesin-based sealant, they also help prevent galling. *If you are interested in information regarding our adoption results, please feel free to contact us.
Easily installed just by inserting! Ceiling-mounted air conditioner indoor unit anti-fall bracket.
The ceiling-mounted air conditioning indoor unit may have the suspension bolts come loose due to significant vibrations from events such as earthquakes, depending on the shape of the mounting brackets. The "Shock Absorption Kachitto KCT Type" is a seismic countermeasure bracket designed to prevent the falling of ceiling-mounted air conditioning indoor units. It can be easily installed by simply inserting it, and retrofitting is also possible. 【Features】 ■ Designed to prevent the falling of ceiling-mounted air conditioning indoor units ■ Easy to install by simply inserting it ■ Retrofitting is possible ■ 3D vibration tests (effect confirmed with seismic wave input) *For more details, please refer to the PDF materials or feel free to contact us.
Sanitary type tank mounting bracket that does not require welding.
〇 This is a mounting bracket for a helix-type tank that does not require welding. 〇 It can be attached to the lid of the container or the holes on the side of the container without welding. 〇 Since it does not require welding, it can be reused multiple times. 〇 For attachment to the side of the container, a specially shaped silicone gasket is used.
Introducing the SHACL small ceramic connector mounting bracket.
The SHACL small ceramic connector mounting bracket is a fixture for mounting small ceramic connectors. For more details, please contact us or refer to the catalog.
Set into the container with one touch. It rotates 360°, allowing it to accommodate any binding angle for securing the container.
"Anshin-kun" is a container fastening device that can be used for container yards and other storage areas, as well as for typhoon measures during loading and lashing during transport. It can be set up with a one-touch mechanism on corner castings, enhancing work efficiency, and the hooks can rotate 360°, allowing for various securing angles. Additionally, it eliminates the need for high-altitude work, ensuring safe operations. There are also various usage methods, such as on barges or on chassis. Using it in conjunction with a hook-equipped belt (with anti-detachment features) will further improve work efficiency. [Features] Disaster prevention with Anshin-kun One-touch setup on containers No high-altitude work required *For more details, please contact us.
Mounting bracket for enclosures to DIN Rail
For installation of enclosures, PCB and other parts onto a DIN Rail. Robust metallic material allows rigid mounting on DIN Rails. Simple installation and removal via the pull lever. Load capacity: 10kg [Material] Base, lever: Steel plate Spring: Iron
The material used is galvanized steel! Let us introduce our mounting brackets.
At Ecolde Japan Co., Ltd., we handle the mounting brackets (ball joint & socket type) 'PX18'. We also offer a lineup that includes 'WX18' for M3.5 and 'WG22', 'PF22' for M5. The material used is zinc-plated steel, with options available in stainless steel AISI 303 (V2) and AISI 316 (V4). 【Specifications】 ■ Material: Zinc-plated steel ■ Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.
Using zinc-coated steel! Introducing products with ball joint and socket types.
At Ecoled Japan Co., Ltd., we handle the mounting brackets (ball joint & socket type) 'WX30'. We offer options in stainless steel AISI 303 (V2) and AISI 316 (V4). Additionally, we use zinc-plated steel for the material. Please feel free to contact us if you have any requests. 【Specifications】 ■ Material: Zinc-plated steel ■ Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.
We use zinc-coated steel for the material! Let me introduce our mounting brackets.
Ecold Japan Co., Ltd. handles mounting brackets (shaft joint type). We offer "ADKG" and "ADKU" in sizes M5, M8, M10, and M14. The products are made of zinc-plated steel. Please feel free to contact us if you have any requests. 【Specifications】 ■Material: Zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.
Using galvanized steel! Introducing fork-type mounting brackets.
At Ecolde Japan Co., Ltd., we handle the mounting bracket (fork type) 'GA56'. It is made of zinc-plated steel, with options available in stainless steel AISI 303 (V2) and AISI 316 (V4). Additionally, we also offer the M20 'GA80' and M24 'GA99'. Please feel free to contact us if you have any requests. 【Specifications】 ■ Material: Zinc-plated steel ■ Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.
