Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.
91～120 item / All 755 items
When working on an inclined surface! It prevents the belt from tightening around the waist, allowing for easier work.
Fujii Electric Co. handles "yoke fittings." Using yoke fittings prevents the belt from tightening around the waist while working on slopes, allowing for easier work. [Features] ■ Prevents the waist from tightening on slopes ■ Allows for easier work *For more details, please refer to the PDF materials or feel free to contact us.
[Knowledge of Handle Selection] Reducing the length of the mounting bracket alleviates the burden on the door side!
【Before】 ■Long handle mounting bracket The mounting bracket that secures the handle to the door is one of the important components for the workability of attaching the handle and the stability of handle operation, but some are excessively large and heavy. ↓ 【After】 ■Shortened handle mounting bracket The mounting bracket that secures the handle to the door is minimized in size and made lighter. Additionally, as the weight of the mounting bracket decreases, the handle part of the door becomes lighter, reducing the burden on the door. *For more details, please refer to the catalog or feel free to contact us.
Connecting for two or more tanks for suction and discharge of bathhouse and pool water.
The bath and pool circulation fittings are used for water intake and discharge, as well as for connecting two or more tanks. Please use them appropriately, taking into consideration the intended use, the material of the bathtub or pool, water quality, and structural constraints. For more details, please contact us or download the catalog.
High-quality, low-cost vehicle parts - Kyomachi's Imono-made casters, FC
The "Cast Iron Wide Bracket KSK (FC) with Rubber Wheels" is a high-quality, low-cost light vehicle component designed for heavy loads. It is appreciated not only domestically but also by customers overseas. For more details, please download the catalog or contact us.
High-quality, low-cost vehicle parts: Kyomachi's ductile cast iron casters, FCD.
The "Ductile Wide Fitting KSK (FCD) with Urethane Rubber Wheels" is a high-quality, low-cost light vehicle component. It is well-received not only in Japan but also by customers overseas. For more details, please download the catalog or contact us.
High-quality, low-cost vehicle parts - Kyomachi's ultra-heavy-duty steel fittings.
Caster "Super Heavy-Duty Steel Plate Fittings KSK Heavy Type" are high-quality, low-cost parts for light vehicles. They are well-received not only domestically but also by customers overseas. For more details, please download the catalog or contact us.
The material is made of ductile cast iron (FCD450)! It is also possible to manufacture fittings by welding with SS material.
We would like to introduce the "Heavy Load Fixed Bracket (NKS Type)." We offer a lineup with flange diameters and boss widths of 200×60, 280×110, and 280×136. The shaft diameter can be customized according to your preferences. Please feel free to contact us when you need assistance. 【Features】 ■ Made of ductile cast iron (FCD450) ■ The shaft diameter can be customized according to your preferences ■ It is also possible to manufacture brackets by welding with SS material *For more details, please refer to the PDF document or feel free to contact us.
ベーシックなデザインと、ステンレス鋼製の高い耐久性を実現！
当カタログでは、当社で取り扱っている「フック・吊金具」について ご紹介しております。 大型のものから、さまざまな取付場所に対応するもの、シャックル類まで、 幅広くラインアップ。 それぞれの特長や用途、注意事項などについて掲載しております。 製品選定の際にぜひご活用ください。 【掲載製品】 ■標準フック ■収納フック ■ナス環フック ■可動フック ■マグネットフック ■シャックル類 ※詳しくはPDFをダウンロードしていただくか、お気軽にお問い合わせください。
The pipe shape protects it, allowing water to flow down without entering the inside!
The main components of the "Ductile Waterproof Type / Adjustable MG-OS Fitting" are made entirely of stainless steel. The entrance path of the center pin is protected by a pipe shape due to improvements in the mounting seat, allowing water to flow down without entering the interior. Additionally, there is also a "Ductile Waterproof Type / Fixed MG-WS Type" that uses stainless steel for the axle and cotter pin. 【Features】 ■ All major components are made of stainless steel ■ The entrance path of the center pin is protected by a pipe shape due to improvements in the mounting seat, allowing water to flow down without entering the interior ■ The fitting body is coated with a waterproof paint that is resistant to water ■ For compatible wheels, we select and manufacture wheels that meet customer specifications, such as wheels with stainless steel bearings and waterproof coatings *For more details, please download the PDF or feel free to contact us.
We offer a variety of options tailored to your needs, including hardware with stoppers and reinforcement hardware!
"Placon Support" is a pipe mounting bracket compatible with the extensive "Placon Series." We offer a variety of options tailored to different uses, including brackets with stoppers, reinforcement brackets, and anti-back devices to prevent workpiece drop. In addition to the "25/35/40/60/85 Series," we also have products like the Placon Stopper in our lineup. 【Compatible Placon List】 ■25 Series: GPR2528A ■35 Series: GP3533B ■40 Series: GP4036A/GP4036B/GP4050C/GP4050D/UR4050/GPR4040A/ GPR4040B/GPR4040SR/GPR4055C ■60 Series: GP6033B/GP6033HA/GP6016S/GPR6033B/GPR6033HA/GPR6016S ■85 Series: GP8543B/GPR8545B/GPR8545HA/GPR8545SR/GPR8523S *For more details, please refer to the PDF document or feel free to contact us.
![VESA 75mm/100mm compatible fixed wall mount bracket [ADM01]](https://image.mono.ipros.com/public/product/image/1e1/2000163725/IPROS8416337641755895445.jpg?w=280&h=280)
Convenient for wall mounting small monitors! VESA standard compatible fixed-angle wall mount bracket.
This is a fixed-angle wall mount bracket compatible with VESA 75x75mm and 100x100mm, convenient for mounting small monitors on the wall. For more details, please contact us.
![VESA 75mm/100mm compatible adjustable wall mount bracket [ADM02]](https://image.mono.ipros.com/public/product/image/ad5/2000163726/IPROS1277972538877868055.jpg?w=280&h=280)
Convenient for wall mounting small monitors! VESA standard compatible adjustable angle wall mount bracket.
This is an angle-adjustable wall mount compatible with VESA 75x75mm and 100x100mm. It features a built-in level at the bottom of the unit for easy horizontal alignment. For more details, please contact us.
Wall connection fittings (for steel, wood, and ALC substrates, 1/2 nut mounting fittings) allow the nut section to rotate freely even when tilted 8° in any direction.
Temporary scaffolding connection fittings for wall-to-wall connections, designed for retrofitting methods, are very convenient as they do not require welding or similar processes. They do not damage wall materials (such as siding) or cause any wear.
Securing storage space for megaphones and installing emergency alarm devices.
The megaphones that can be installed on the wall-mounted bracket NZ-6411 are the waterproof and compact NZ-645 series megaphones. There are three models available: the NZ-645 for amplification only, the NZ-645S with a siren, and the NZ-645W with a whistle. You can choose according to your needs for emergency and disaster prevention, sports, outdoor activities, guidance and amplification in public spaces such as schools, stations, airports, commercial facilities, and halls.
Rust-resistant, sturdy all-stainless steel 3mm thick. Compatible pipe diameter: φ16~45mm. Can be installed vertically or horizontally.
◎3mm thick all stainless steel This is a 3mm thick L-shaped antenna mounting bracket made of durable, rust-resistant all stainless steel. ◎Compatible with SMA/M/N type bases It has mounting holes of φ6.5 and φ16.2, allowing for the installation of SMA/M/N type bases. ◎Vertical and horizontal mounting possible Two U-bolts and two U-shaped brackets are included, enabling both vertical and horizontal mounting. *Custom orders for specific frequencies are accepted from small quantities.
Rust-resistant, sturdy all-stainless steel 3mm thick; compatible pipe diameter: φ27~65mm; suitable for single pipes (scaffolding pipe φ48.6).
◎3mm thick all stainless steel This is a 3mm thick L-shaped antenna mounting bracket made of durable, rust-resistant all stainless steel. ◎Compatible with SMA/M/N type bases It has mounting holes of φ6.5 and φ16.2, allowing for the installation of SMA/M/N type bases. ◎Vertical and horizontal mounting possible Two U-bolts and two U-shaped brackets are included, enabling both vertical and horizontal mounting. *Custom orders for specific frequencies are accepted from small quantities.
![All stainless steel wide-angle antenna mounting bracket [NB600]](https://image.mono.ipros.com/public/product/image/422478/IPROS10544847881761225841.gif?w=280&h=280)
This is a fully stainless steel antenna mounting bracket that allows you to install the antenna vertically even on sloped surfaces.
- 3mm thick all stainless steel This is a 3mm thick antenna mounting bracket made of durable, rust-resistant all stainless steel. - Compatible with SMA, M, and N type connectors It has mounting holes for φ6.5 (SMA connector, M6 bolt) and φ16.2 (M and N connectors). - Adjustable angle over a wide range This antenna mounting bracket allows you to set the antenna vertically even on sloped surfaces.
![All stainless steel tripod-compatible antenna mounting bracket [NB500]](https://image.mono.ipros.com/public/product/image/422478/IPROS18392370213430605221.jpg?w=280&h=280)
Universal antenna mounting bracket that can be attached to a camera tripod, compatible with 1/4-20UNC screws.
- 3mm thick all stainless steel This is a 3mm thick antenna mounting bracket made of durable, rust-resistant all stainless steel. - Compatible with 1/4-20UNC screws This is a universal antenna mounting bracket that can be attached to camera tripods. - Compatible with SMA, M, and N type connectors It has mounting holes for φ6.5 (SMA connector, M6 bolt) and φ16.2 (M and N connectors). - Compatible with U-bolts Our U-bolts (U35, U45) can be mounted.
The arm thickness is 8mm, providing strong support for the glass.
Fixed bracket for holding glass panels. The OT-G650-SUS is thick but can accommodate glass as well. It allows for temporary attachment of the glass during installation, making it highly efficient for construction. ★POINT★ ● Compatible glass thickness: 8–12 mm (Contact us for thicknesses over 13 mm) ● Allowable load: 70 kg (when using 4 units and installed vertically) ● Made of stainless steel, offering excellent corrosion resistance. During glass installation, position adjustments of ±6 mm in the left-right direction, ±5 mm in the up-down direction, and a maximum of 4 mm in the depth direction can be made. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566
Thick and large glass is firmly supported, functioning well while looking sleek.
Spaces that use glass can express an open image that integrates the indoors and outdoors, which is why thick and heavy glass is used when creating glass-walled spaces in stores and hotels. The "OT-G650-SUS" can accommodate heavy glass with a permissible load of 110kg (when using 4 units and installed vertically) and is compatible with glass thicknesses of 18 to 28mm. As the glass becomes heavier, installation becomes more challenging, but the OT-G650-SUS has a shaft that protrudes forward, allowing for temporary attachment to the glass processing holes. In the temporary attachment state, you can hand-tighten the fittings from the front, and by using the separately sold tightening fittings (OT-GTL-A-50), the installation is completed, thus improving the efficiency of the construction work. If the surface position does not align with the adjacent glass, you can make fine adjustments of up to 4mm forward by loosening the fixings. After making the adjustments, retighten the fixings and the disc nut to secure it, completing the installation. ★POINT★ ● Compatible with heavy glass. Permissible load: 110kg (when using 4 units and installed vertically) / Compatible glass thickness: 18-28mm ● Allows for temporary attachment to the shaft for smooth installation ● Made of stainless steel with excellent corrosion resistance
No need to drill holes in the roof, installation hardware for standing seam metal roofs.
With the obligation to install solar panels in Tokyo, "solar power generation" has gained attention. Solar power generation utilizes the phenomenon where electricity is generated when light hits silicon semiconductors, converting solar energy directly into electricity through solar cells (semiconductor elements). According to the Agency for Natural Resources and Energy, Japan has the highest solar power capacity per land area in the world and is actively adopting it globally. When installing solar panels on a roof, it is necessary to use brackets suitable for the roof shape. The PT-919 is a mounting bracket for solar panels designed for "standing seam metal roofs." ★POINT★ ● Can be installed without making holes in the roof, eliminating concerns about leaks ● Lightweight at 265g, reducing the burden on the roof ● Can be installed simply by tightening bolts onto the roof
For locking gates and storage sheds.
Security auxiliary lock hardware
Easy to install, prevents rain gutter clogging.
Install aluminum mesh on the rain gutter to prevent clogging from leaves and other debris.
Free design, safety, cost reduction! Achieving a 12m large span with inexpensive housing timber (under 6m).
The "Tech One P3 Plus" is a construction hardware designed to reinforce the weaknesses of wooden houses. After the spread of high airtightness and high insulation houses and revisions to building codes, it became mainstream in residential construction following the Great Hanshin-Awaji Earthquake. This seismic processing technology is suitable for modern living environments and is widely used not only in general housing but also in medium to large-scale buildings such as hospitals, daycare centers, and other commercial facilities. 【Features】 ■ Achieves a large span of 12m using inexpensive residential wood (under 6m) ■ Truss structure that efficiently utilizes the strength of wood ■ Unique two-piece concept ■ Allows for flexible framing due to adjustable angles ■ Enables free design through structural calculations (compatible with various framing types, spans, and floor heights) *For more details, please refer to the PDF materials or feel free to contact us.
Solar panel mounting brackets for industrial standing seam roofs.
Since it is installed using tight frame bolts for a half-roof, it can be set up without making holes in the roof, eliminating concerns about water leakage. Strength tests have been conducted at the Prefectural Institute of Machinery and Materials, Autograph (Shimadzu Corporation). Tensile test: 2.87 kN Compression test: 7.45 kN Patent applied for.
Easy installation and safe construction! Solar panel mounting brackets that won't damage the roof.
The "Haze-style Folding Plate Roof HG-18" is a mounting bracket created by professionals in solar panel installation and metal processing. The simplified components are strong and have a beautiful finish. The wide frame that securely covers the roof protects it from rain and wind. The installation method does not require drilling holes in the roof, making it easy to install and improving efficiency. It helps reduce costs and increase work efficiency. 【Features】 ■ Easy installation ■ Safe construction ■ Clean finish ■ Quick installation ■ Small lot support For more details, please refer to the catalog or feel free to contact us.
Compatible with various modules! Module mounting brackets that support thicknesses of 35 to 50 mm.
The "Module Fixed Bracket CP.TP" is a solar panel mounting bracket created by professionals in solar panel installation and metal processing. The components are simplified to the minimum while maintaining strength, helping to reduce costs and improve work efficiency. Not only does it accommodate various module thicknesses from 35mm to 50mm, but feel free to contact us for inquiries about small lots. 【Features】 ■ Compatible with various modules ■ Supports thicknesses of 35 to 50mm ■ Does not damage roofs ■ Compatible with various standing seam roofs ■ Enables speedy installation For more details, please refer to the catalog or feel free to contact us.
This is a bracket for installing a curved mirror as a double-sided mirror.♪
This is a bracket for installing curved mirrors symmetrically on both sides using a two-sided mirror on pillars, utility poles, or walls. It comes as a set with a straight arm and an angled arm, which is useful for installing curved mirrors at T-junctions. *Note that special brackets are required for installation on walls or utility poles.
This is a bracket that allows you to easily install a curved mirror on a utility pole with a flexible band♪
This is a bracket for installing a curved mirror using a utility pole. It can accommodate pole diameters from φ130 to φ390 with the included adjustable mounting bands.
This is a fitting to connect the existing guardrail and posts.♪
This is a bracket for installing posts using existing guardrails in places where the road width is narrow and embedding the posts is difficult. It is made of hot-dip galvanized steel, making it sturdy and resistant to breakage. *When installing a convex mirror, it is recommended to secure the parent and child bands at two or more points vertically.
