Last Updated： Aggregation Period:Jul 01, 2026～Jul 28, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 01, 2026～Jul 28, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 01, 2026～Jul 28, 2026
This ranking is based on the number of page views on our site.
61～90 item / All 960 items
This is a caster-type fitting that allows you to easily create a cart using a single pipe (outer diameter 48.6mm).
●Cup type and corner type casters ●Sturdy fixed with a porcelain set
●Single pipe truss beams can be assembled with freely adjustable height, width, length, and pitch.
●It does not sag even when a load of 40kg (2 pieces of 20kg copper) is applied. ●The flange bolts and flange nuts are included with M4250SPJ-JTFS.
Single pipe fittings that allow ropes or chains to be stretched on single pipes or single piles.
● It can be easily installed by simply tightening the eye bolt and securing it with a nut. ● There are two types: single-sided ring type and double-sided ring type. ● It can be easily attached to a single pipe post, allowing various ropes and chains to be stretched, expanding the various uses of the single pipe post. * Please check the size when using a chain.
A single pipe joint that allows you to freely extend the length of single pipe piles or single pipe stakes on site!
This is a single pipe joint that connects single pipe piles and extension single pipes, allowing the single pipe piles to be extended to a length suitable for the ground conditions and site environment. It ensures that the single pipe piles reach a solid support layer, enabling even long single pipe piles to be safely driven into the ground by one person with both feet always on the ground.
This is a seal fitting for PP bands (ester bands).
This is a seal fitting for PP bands (ester bands).
By attaching it to the front side of the pallet, it prevents the pallet from falling.
- The stopper part that stands up at the front of the pallet tilts parallel to the pallet when pushed from the front by a forklift and is fixed in place by a magnet. - The tilted plate can be returned to a state where the stopper is effective by either lifting it by hand after work or by using the tips of the forklift's forks to lift it. - The M227FP-5050NKPT is a type that can be easily installed just by covering it over the rack frame. - The M227FP-101KPT is mounted by covering it over the frame and is used after being secured with screws.
Since seal tape wrapping and liquid gasket application are unnecessary, it improves construction efficiency on-site. It prevents inconsistencies in wrapping, insufficient application, and excessive application due to differences in workers' experience.
In the pneumatic joint industry, our pre-coated threaded joints, which hold an 80% market share (according to our own research), are coated with a fluororesin-based sealant on the PT thread section in advance. On-site, these joints demonstrate sealing performance simply by being tightened, using the processed joints. They are effective not only for leak prevention but also for preventing loosening, and due to the fluororesin-based sealant, they also help prevent galling. *If you are interested in information regarding our adoption results, please feel free to contact us.
Easily installed just by inserting! Ceiling-mounted air conditioner indoor unit anti-fall bracket.
The ceiling-mounted air conditioning indoor unit may have the suspension bolts come loose due to significant vibrations from events such as earthquakes, depending on the shape of the mounting brackets. The "Shock Absorption Kachitto KCT Type" is a seismic countermeasure bracket designed to prevent the falling of ceiling-mounted air conditioning indoor units. It can be easily installed by simply inserting it, and retrofitting is also possible. 【Features】 ■ Designed to prevent the falling of ceiling-mounted air conditioning indoor units ■ Easy to install by simply inserting it ■ Retrofitting is possible ■ 3D vibration tests (effect confirmed with seismic wave input) *For more details, please refer to the PDF materials or feel free to contact us.
Sanitary type tank mounting bracket that does not require welding.
〇 This is a mounting bracket for a helix-type tank that does not require welding. 〇 It can be attached to the lid of the container or the holes on the side of the container without welding. 〇 Since it does not require welding, it can be reused multiple times. 〇 For attachment to the side of the container, a specially shaped silicone gasket is used.
The thermostat can be screwed onto a heat plate or flat surface using a combination of a cap and mounting hardware.
We would like to introduce the "mounting brackets" from Japan GT Corporation, which conducts integrated production from the development of bimetal thermostats (automatic temperature controllers, temperature overheat prevention devices) to molds, parts, finished products, and shipping. By combining the cap and mounting brackets, the thermostat can be screwed onto a heat plate or flat surface. You can choose the mounting brackets based on hole diameter, hole pitch, and length. 【Lineup (partial)】 ■ Brackets for flat mounting ＜BRACKET 1＞ ・Long hole 3.2×4.2 ・Outer diameter 32 ・Thickness 0.5 ＜BRACKET 2＞ ・Long hole 4.2×5.8 ・Outer diameter 44 ・Thickness 0.5 *For more details, please refer to the PDF document or feel free to contact us.
Introducing the SHACL small ceramic connector mounting bracket.
The SHACL small ceramic connector mounting bracket is a fixture for mounting small ceramic connectors. For more details, please contact us or refer to the catalog.
Set into the container with one touch. It rotates 360°, allowing it to accommodate any binding angle for securing the container.
"Anshin-kun" is a container fastening device that can be used for container yards and other storage areas, as well as for typhoon measures during loading and lashing during transport. It can be set up with a one-touch mechanism on corner castings, enhancing work efficiency, and the hooks can rotate 360°, allowing for various securing angles. Additionally, it eliminates the need for high-altitude work, ensuring safe operations. There are also various usage methods, such as on barges or on chassis. Using it in conjunction with a hook-equipped belt (with anti-detachment features) will further improve work efficiency. [Features] Disaster prevention with Anshin-kun One-touch setup on containers No high-altitude work required *For more details, please contact us.
Mounting bracket for enclosures to DIN Rail
For installation of enclosures, PCB and other parts onto a DIN Rail. Robust metallic material allows rigid mounting on DIN Rails. Simple installation and removal via the pull lever. Load capacity: 10kg [Material] Base, lever: Steel plate Spring: Iron
The material used is galvanized steel! Let us introduce our mounting brackets.
At Ecolde Japan Co., Ltd., we handle the mounting brackets (ball joint & socket type) 'PX18'. We also offer a lineup that includes 'WX18' for M3.5 and 'WG22', 'PF22' for M5. The material used is zinc-plated steel, with options available in stainless steel AISI 303 (V2) and AISI 316 (V4). 【Specifications】 ■ Material: Zinc-plated steel ■ Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.
Using zinc-coated steel! Introducing products with ball joint and socket types.
At Ecoled Japan Co., Ltd., we handle the mounting brackets (ball joint & socket type) 'WX30'. We offer options in stainless steel AISI 303 (V2) and AISI 316 (V4). Additionally, we use zinc-plated steel for the material. Please feel free to contact us if you have any requests. 【Specifications】 ■ Material: Zinc-plated steel ■ Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.
We use zinc-coated steel for the material! Let me introduce our mounting brackets.
Ecold Japan Co., Ltd. handles mounting brackets (shaft joint type). We offer "ADKG" and "ADKU" in sizes M5, M8, M10, and M14. The products are made of zinc-plated steel. Please feel free to contact us if you have any requests. 【Specifications】 ■Material: Zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.
Using galvanized steel! Introducing fork-type mounting brackets.
At Ecolde Japan Co., Ltd., we handle the mounting bracket (fork type) 'GA56'. It is made of zinc-plated steel, with options available in stainless steel AISI 303 (V2) and AISI 316 (V4). Additionally, we also offer the M20 'GA80' and M24 'GA99'. Please feel free to contact us if you have any requests. 【Specifications】 ■ Material: Zinc-plated steel ■ Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.
Assembly hardware suitable for the assembly and reinforcement of corners for the "ABC Channel."
Our "assembly hardware" is designed to fit the dimensions of the "ABC channel," making assembly easy with just a bolt tightening. The material is made of steel plate, finished with trivalent chrome electro-galvanizing. *For more details, please refer to the PDF document or feel free to contact us.
Significant reduction in work costs by collaborating with fans.
The "Fan Terminal Block Mounting Bracket" is a wiring component for ventilation fans. Since it is fastened together with the fan, no additional hole processing for terminal block installation is required. This significantly reduces labor costs and streamlines the terminal block installation process. 【Features】 ■ Significant reduction in labor costs ■ Streamlining of terminal block installation ■ No additional hole processing for terminal block installation required *For more details, please refer to the PDF document or feel free to contact us.
Just tighten one fixed screw! Noise filter installation auxiliary bracket.
The "DH Holder (DIN Rail Compatible Noise Filter Mounting Bracket)" is a product manufactured by Shinohara Electric that can be mounted on a DIN rail to assist in the installation of noise filters. By simply tightening one fixing screw, it can be secured at any position on the DIN rail, eliminating the need for direct attachment to the back panel. The mounting screws use flat-head screws to ensure a flat mounting surface. To facilitate easy installation of noise filters, it is pre-tapped. Additionally, it can also accommodate Shinohara's push button mounting brackets (PBK series). 【Features】 ■ Can be fixed at any position on the DIN rail ■ No need for direct attachment to the back panel ■ Uses flat-head screws for mounting ■ Pre-tapped for easy installation ■ Compatible with Shinohara's push button mounting brackets (PBK series) *For more details, please refer to the PDF document or feel free to contact us.
Fine adjustments are also possible! As a fixture that can adjust the height within the board.
This is a bracket used to adjust the installation height of equipment inside the panel. 【Features】 ■ By connecting two pieces, the height can be adjusted to either 120mm or 150mm. ■ For fine adjustments of 1mm or 2mm, please use washers for adjustment. ■ It can be tightened with a wrench or monkey wrench. *For more details, please refer to the PDF document or feel free to contact us.
Clampable with groove processing on the head! A fitting that can adjust the height inside the panel.
【Features】 ■ By connecting two pieces, the height can be adjusted to 120mm or 150mm. ■ For fine adjustments of 1mm or 2mm, please use washers for adjustment. ■ The head of the main body is designed with a (-) groove so that it can be tightened with a (-) screwdriver. *For more details, please refer to the PDF document or feel free to contact us.
Easy to adjust and fine-tune! Equipment mounting height adjustment bracket.
The "Flat Post" is a mounting bracket for adjusting the height of equipment installation within a panel. Adjustment and fine-tuning can be easily done even after preliminary installation of the equipment. It is made of steel plate and finished with environmentally friendly trivalent chrome electro-galvanizing. 【Features】 ■ Easy adjustment and fine-tuning even after preliminary installation ■ Environmentally friendly trivalent chrome electro-galvanized finish *For more details, please refer to the PDF document or feel free to contact us.
A wide range of sizes to match the mounting hole pitch! You can choose according to your application.
The "Indoor Support Insulator Mounting Bracket" is a mounting bracket for indoor support insulators for busbars and electrical wires within distribution boards. We offer a wide range of sizes to match the pitch of the mounting holes for indoor support insulators. You can select clamps for round wires (high-voltage insulated wires) and busbars (vertical support and horizontal support) according to your application. 【Features】 ■ A wide range of sizes to match various mounting hole pitches ■ Clamps can be selected for round wires and busbars according to application ■ Material: Clamps for round wires (high-voltage insulated wires): made of brass (Note: Only CB-30FJ is made of steel plate) Clamps for busbars (vertical and horizontal support types): made of cast iron and brass *For more details, please refer to the PDF document or feel free to contact us.
Easy installation of protective covers around the power supply area of DIN rail-compatible relays, etc.
The "DH Holder Protective Cover Mounting Type" is a structural material for panels that allows for easy installation of protective covers around the conductive parts of DIN rail-compatible relays by fastening it together with terminal block fixing brackets. Please use it as a mounting base when using protective covers with our DIN rail-compatible relays and similar devices. Custom sizes (height, width) can also be produced. 【Features】 1. By fastening it together with terminal block fixing brackets, you can easily install protective covers around the conductive parts of DIN rail-compatible relays. 2. We also accept orders for sales as a set with mounting brackets. Please add a "T" at the end of the model number when ordering (e.g., DHC-35T). 3. Custom sizes (height, width) can also be produced. *For more details, please refer to the PDF materials or feel free to contact us.
You can easily extend the DIN rail!
【Usage】 This can be used as an extension fitting (joint) for existing DIN rails during on-site modifications. 【Features】 1. No drilling or tapping is required when adding extensions. 2. There are two types available: a straight extension type and a type that can extend 90 degrees forward. *For more details, please refer to the PDF document or feel free to contact us.
Please use it as a mounting bracket for the volume and toggle switches in distribution boards, control panels, and operation panels, as well as for ducts and push-button switches inside the panels.
【TK】Please use it as a mounting bracket for volumes and toggle switches inside distribution boards, control panels, and operation panels. 【DTK】Please use it as a duct mounting bracket inside distribution boards, control panels, and operation panels. 【PBK】Please use it as a mounting bracket for push-button switches. 【VTK】Please use it as a mounting base for volumes and toggle switches. 【TCK】Please use it for mounting DIN standard devices with a 48mm square. 【TCKH】Please use it for mounting DIN standard devices with 48mm or 96mm squares. 【DSK-85】This bracket is ideal for mounting Omron's micro switch "panel-mounted push-button type." *For more details, please refer to the PDF document or feel free to contact us.
Easily attach a commercially available protective cover with one touch! Protect the charging area effortlessly!
【Features】 Please use this as a stand for mounting protective covers on our DIN rail-compatible relays, timers, and small power relays. *For more details, please refer to the PDF materials or feel free to contact us.
A new DIN rail mounting bracket for fuse holders has been created.
【Features】 ■ The bracket can be fixed at any position on the DIN rail by simply tightening one fixing screw. ■ Flat-head screws are used for the mounting screws (the mounting screw holes are processed to be recessed), making the mounting surface flat. ■ Tapping has been done to allow for easy installation of the fuse holder. * For more details, please refer to the PDF document or feel free to contact us.
Dual joint fitting 294-9107.33-10010 one-touch installation
● No screws, nuts, or washers are needed due to the snap-in design. Please refer to the DST series introduction for details. ● Since welding is not required, installation time is significantly reduced, leading to cost savings. ● Two adjacent panels can be joined together.
