We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Monitor.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Monitor Product List and Ranking from 364 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.

Monitor Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.

  1. Suntex Co., Ltd. Shizuoka//Industrial Electrical Equipment
  2. EIZO Ishikawa//Consumer Electronics
  3. プロトラッド Tokyo//Industrial Electrical Equipment
  4. 4 キトナレイズ 東京営業所 Tokyo//Consumer Electronics
  5. 5 V-net AAEON Kanagawa//Industrial Electrical Equipment
Go to Company Ranking

Monitor Product ranking

Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.

  1. AC/DC compatible residual current monitor (for grounding wiring method) プロトラッド
  2. EtherNet/IP compatible power monitoring device 'WH Series'
  3. Crimp Force Monitor 'CFM-MX Plus' True Soltec Co., Ltd.
  4. Dew Point Display Monitor TK-100 MS テクネ計測
  5. 4 Monitor that connects directly to IP cameras [Enhance security without a PC!] EIZO

Monitor Product List

1111～1140 item / All 2223 items

Displayed results
Particle monitor

Particle monitor

Real-time monitoring of particle count, temperature, and humidity! A particle monitor capable of multi-point measurement.

We would like to introduce the "Particle Monitor" handled by As One Corporation. It displays cleanliness classes from 1,000 to 100,000 using four levels of LED indicators. It outputs particle counts for 0.3μm and several micrometers, enabling the measurement of suspended particles. Additionally, we also offer a "Particle Monitor (Coarse Particle Type)" that can measure coarse particles. By using the evaluation software, you can check the measurement values in real-time. 【Features of the Evaluation Software】 ■ The measurement screen displays values in real-time during measurement ■ Easily graph measurement results ■ Capable of importing factory layout diagrams, etc. ■ Lights up red during alarm output, making it easy to identify the location of abnormalities ■ Sends notification emails at the timing of errors and alarms *For more details, please refer to the PDF materials or feel free to contact us.

  • Other measurement, recording and measuring instruments
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Crack Growth Monitor DCM-2

Crack Growth Monitor DCM-2

In various load tests, a constant current is passed through the test specimen, and the voltage that changes in response to the propagation of the "crack" is measured to monitor the "crack."

The DCM-2, which applies the latest microprocessor technology, is a measuring instrument that monitors the propagation of "cracks" in material testing.

  • Other electronic measuring instruments
  • Other inspection equipment and devices
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DSRC AirMonitor

DSRC AirMonitor

Air monitor for non-contact wireless communication status monitoring.

The DSRC Air Monitor is an air monitor for DSRC communication (narrowband wireless communication) that complies with the standard ARIB STD-T55 set by the Association of Radio Industries and Businesses, targeting the ETC (Electronic Toll Collection System). 【Features】 ■ Compliant with ARIB STD-T55. ■ Monitors DSRC communication data non-contactly. ■ Checks frame structure, slot timing, etc., at the L1 level. ■ Data analysis at the L2 level (MAC sublayer). ■ Enables flexible investigations designed for vehicle installation. *For more details, please request materials and catalogs using the button above.

  • Electrical Instruments/Electrometers
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DSRC Air Monitor (ARIB STD-T75 compatible version)

DSRC Air Monitor (ARIB STD-T75 compatible version)

Second generation DSRC air monitor, high-speed type wireless communication status monitor.

2nd Generation DSRC Air Monitor, High-Speed Wireless Communication Status Monitor ★For more details, please refer to the materials and catalog. *You can immediately check the details from the catalog download. === Features === ■Compliant with ARIB STD-T75 ■Monitors DSRC communication data non-contact ■Checks frame structure, slot timing, etc., at L1 level ■Data analysis at L2 level (MAC sublayer) ■Designed for in-vehicle use, enabling significant reduction in analysis time through agile investigations === Other Functions === ・Communication data logging function ・Data collection start trigger function ・Data search function ・Data collection start trigger function ・Sampling data display function ・Frame content analysis function ・L2 analysis function ・Others

  • Other electronic measuring instruments
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Easy Energy Saving Monitor "Setsuden Monita"

Super Easy Energy Saving Monitor "Setsuden Monita"

A system that measures power consumption in general households and encourages energy saving!

"Power Saving Monitor" measures the power consumption of general households and displays the level of energy savings through color indicators on a display unit, making it possible to reduce electricity usage. The display unit shows the power consumption value and usage rate, and indicates the energy-saving status with colors. It issues a warning if the target value (default energy-saving rate of 15%) is not met. 【Features】 ■ Composed of a power sensor unit and a display unit ■ Measured power consumption data can be transferred to the display unit via Bluetooth communication ■ The power sensor unit is powered by batteries or an AC adapter ■ The display unit is designed as a tablet-type PC, with dedicated software planned for development *For more details, please refer to the PDF document or feel free to contact us.

  • Other electronic parts
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Small-Diameter Flow Monitor - Check the Flow at a Glance

Small-Diameter Flow Monitor - Check the Flow at a Glance

Suitable for piping around molding machines even in tight space! The Flow Vane (plastic part) can be replaced independently, which contributes to cost reduction.

Models FMC-25-1F / FMC-25-2F are replaceable Flow Vane types. Small diameter type has been newly added to the lineup! Small diameter type supports lower flow rate (0.6 to 6 L/min) compared to conventional models. Fluid flow from low flow rate can be visually checked with the rotating two-colored impeller. This product can be piped in tight space since molds are becoming smaller. As with the conventional models, Flow Vane ASSY, common to Rc 1/8 and Rc 1/4, can be replaced without removing the unit from the piping. We also offer FLOW METER model FM-03-B with a special valve designed for mold cooling lines, ensuring stable and accurate coolant flow rate. Features - Fluid flow from low flow rate (0.6 L/min) can be visually checked with the rotating two-colored impeller. - Flow Vane ASSY, common to Rc 1/8 and Rc 1/4, can be replaced without removing the unit from the piping. - The stopper prevents unintended removal of the plastic parts. - Installation and replacement is easy since one side of the screw part rotates freely to the left and right. *For more details, please refer to the PDF catalog or feel free to contact us.

  • 2021-04-14_17h09_32.png
  • 2021-04-14_17h11_17.png
  • 1.jpg
  • 2.jpg
  • Other molds
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flow Monitor - Cost-Effective Solution for Preventing Molding Defects

Flow Monitor - Cost-Effective Solution for Preventing Molding Defects

Suitable for piping around molding machines! Easy visual check of coolant flow rate!

FLOW MONITOR contributes to prevent molding defects by confirming coolant flow in mold cooling lines. Fluid flow from low flow rate (0.6 L/min) can be visually checked with the rotating two-colored impeller and Flow Vane ASSY can be replaced without removing it from the piping. Features - Fluid flow from low flow rate (0.6 L/min) can be visually checked with the rotating two-colored impeller. - Flow Vane ASSY can be replaced without removing it from the piping. *For more details, please refer to the PDF catalog or feel free to contact us.

  • 2021-04-14_17h09_32.png
  • 2021-04-14_17h11_17.png
  • 2.jpg
  • 1.jpg
  • Other molds
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Charge Plate Monitor "MP-1"

Charge Plate Monitor "MP-1"

A measuring device with an easy-to-read LCD screen and a user-friendly touch panel design.

The MP-1 is a Charge Plate Monitor (CPM) that can be used for measuring and maintaining the performance of ionizers. It is also possible to fully automate the measurement of the "± ion removal time ⇒ ion balance" of the currently used ionizers. Smooth operation is enabled by a large touch panel, significantly simplifying daily ionizer maintenance. Measurement data is displayed in real-time graphs, allowing for immediate confirmation of the ionizer's operational status. 【Features】 ■ Simultaneous measurement at two points with a charge plate is possible ■ A large (10.4-inch) touch panel improves visibility and operability ■ A small plate that can measure in narrow areas is also available for connection (optional) ■ Measurement data can be saved to a USB memory stick (CSV format) *For more details, please refer to the PDF document or feel free to contact us.

  • Other measurement, recording and measuring instruments
  • Other electronic measuring instruments
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
VUV-C 160-220nm monitor

VUV-C 160-220nm monitor

Low-cost VUVC monitor, ideal for relative output management of VUV-C ultraviolet light sources.

UV-C wavelength 160-220nm Vacuum UV-C monitor VUV-C 160-220nm monitor Outputs VUV-C ultraviolet light as 0-5V DC. Main applications include relative output management of VUV-C ultraviolet sources such as excimer UV lamps, UV-C LEDs, and low-pressure mercury lamps, as well as embedded monitoring in devices. Uses Hamamatsu photo tube. Thin-type UV sensor with a separate body. Made in Japan.

  • Other electronic measuring instruments
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HD-1100 Real-Time Dust Monitor

HD-1100 Real-Time Dust Monitor

Respiratory monitoring using the latest infrared technology. Protecting the respiratory health of workers engaged in industry.

We use the latest infrared technology to provide accurate and instantaneous data on the concentration of suspended particulate matter, in accordance with NIOSH Standard 0600 regarding respiratory zone particles that are harmful to the lungs. This saves costs by eliminating the need for expensive air sampling weight measurements and the associated delays in research analysis. By continuously monitoring harmful particulate matter in the lungs, we can protect the respiratory health of workers engaged in industry and reduce potential liabilities. Additionally, we can also reduce the costs associated with atmospheric monitoring program regulations.

  • Other environmental analysis equipment
  • Particle Counter
  • Environmental Test Equipment
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Exhaust Gas Concentration Monitor Diesel Particulate Monitor

Exhaust Gas Concentration Monitor Diesel Particulate Monitor

.

A high-precision personal portable package that enables respiratory domain measurement and comprehensive graph reporting.

  • Other environmental analysis equipment
  • Other electronic measuring instruments
  • Particle Counter
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wavecontrol EMF Meter Monitor MonitEM

Wavecontrol EMF Meter Monitor MonitEM

Autonomous operation with the "Smart Energy" feature using [AC + solar panels + battery].

MonitEM complies with standards for the network execution of continuous electromagnetic radiation measurement. It can be installed anywhere with solar power supply and wireless communication.

  • Other electronic measuring instruments
  • EMC Testing
  • Environmental Test Equipment
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Portable Electromagnetic Field Monitor WaveMon 1MHz to 8GHz

Portable Electromagnetic Field Monitor WaveMon 1MHz to 8GHz

A lightweight and compact monitor weighing only 190g, continuously monitoring electromagnetic field exposure.

The world's top brand in "RF Safety," Wavecontrol, presents the portable electromagnetic field monitor, WaveMon, which continuously ensures the safety of workers operating in strong electromagnetic fields and surrounding areas. Weighing only 190g, this lightweight and compact monitor continuously monitors electromagnetic field exposure. 【Main Features】 - Equipped with a 3-axis electric and magnetic field sensor - Isotropic & RMS measurement - Relative value display design that is easy for the wearer to see - 6-level alarm with LED display, alarm sound, and vibration - Complies with international standards - ICNIRP, European Directive 2012/35/EU, FCC, SC6 relative values Designed with the user in mind, it is gaining popularity worldwide, especially in Europe. 1. Display design that is easy for the wearer to see 2. Includes arm belt 3. Ergonomic body design for easy grip 4. Compact at only 190g 5. Three types of alarm methods: LED, sound, vibration 6. GPS (optional)

  • Data Logger
  • EMC Testing
  • Other environmental equipment
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Industrial LCD Display Sunlight Readable

Industrial LCD Display Sunlight Readable

Industrial LCD Display Sunlight Readable

In addition to providing excellent optical characteristics as a monitor through surface treatment, it is possible to achieve an astonishingly bright LCD monitor by efficiently reflecting both external light, such as sunlight, and the internal backlight. This is an energy-saving technology that incorporates the natural brightness of the sun, making it an environmentally friendly product that adjusts the brightness of the LCD monitor according to the surrounding light. Changing the backlight to LED and increasing brightness is a relatively easy issue to solve in small monitors under 20 inches due to the heat dissipation design associated with increased power consumption, but it becomes a significant problem in large monitors over 32 inches. With SunnyView eco, it is possible to dramatically improve optical characteristics while maintaining the original power consumption, allowing for the construction of a safer and more reliable product.

  • Other image-related equipment
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fixed Oxygen Monitor Air-C Series

Fixed Oxygen Monitor Air-C Series

This is a long-term stable and measurable oxygen monitor for preventing oxygen deficiency accidents. (2-year warranty)

Oxygen deficiency accidents continue to occur in clean rooms and research facilities isolated from the outdoors, as well as in environments using inert gases. To prevent such troubles, thorough monitoring of "oxygen concentration" is essential, but are your measures sufficient? It will be too late once the worst-case scenario occurs! The "Air-C Series" from Daiichi Thermal Research is a wall-mounted stationary oxygen monitor. By adopting a zirconia sensor, it enables stable measurements over long periods! It can accurately detect decreases in oxygen concentration, allowing for prompt action. Additionally, it achieves both miniaturization and cost reduction, requiring minimal installation space and keeping introduction costs low. [Features] - The zirconia sensor allows for stable measurements over long periods. (2-year warranty) - Optionally, the detection unit can be installed at a remote location. (Cable lengths of 3m, 5m, 10m) - When the oxygen concentration falls below the set value, an alarm lamp lights up, a buzzer sounds, and contact output is provided. - Smaller than our previous models and more affordable compared to other manufacturers' products. *For more details, please contact us or refer to the catalog.

  • Electric furnace
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
12.1-inch Industrial Touch Panel Monitor IDS-3112

12.1-inch Industrial Touch Panel Monitor IDS-3112

"Operable while wearing gloves" 12.1 inches | 1280×768 | -20~60℃ | VGA/DVI | Waterproof and dustproof with IP65 rating

**Main Features of the Product** ◆ 12.1-inch LED backlight with 20% power saving and environmental protection ◆ 4 x 768 XGA, 800 x 600 SVGA panel ◆ Wide operating temperature range of -20℃ to 60℃ ◆ 5-wire resistive touch screen solution ◆ Touch interface: USB & RS-232 ◆ Supports dual signal interfaces: VGA and DVI ◆ Easy installation with integrated bracket ◆ Supports various mounting methods: rear mount and VESA mount ◆ AR surface treatment to enhance readability in sunlight (optional) ◆ Ultra-high brightness solution of 1200 cd/m2 for outdoor applications (optional)

  • LCD display
  • Industrial PCs
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
15-inch industrial touch panel monitor IDS-3215

15-inch industrial touch panel monitor IDS-3215

"Operable while wearing gloves" 15 inches | -20~60℃ | 1024×768 | VGA/DVI | USB/RS-232

15-inch XGA Industrial Panel Mount Monitor 【Main Features of This Product】 ◆ 15-inch XGA LCD panel with 20% energy-saving and environmentally friendly LED backlight ◆ Wide operating temperature range from -20℃ to 60℃ ◆ 5-wire resistive touch screen solution or anti-glare glass ◆ Touch interface: USB & RS-232 ◆ Supports dual signal interfaces: VGA and DVI ◆ Standard integrated frame ◆ Versatile mounting options: rear mount and VESA mount ・ AR surface treatment (optional) ・ Ultra-high brightness solution of 1200 cd/m2 for outdoor applications (optional)

  • Industrial PCs
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
21.5-inch industrial monitor [IDP31-215W]

21.5-inch industrial monitor [IDP31-215W]

100% flat front touch 21.5-inch industrial-grade monitor

- VGA, DVI, HDMI interfaces - Multi-touch projected capacitive touch screen - Slim housing, no additional housing or metal processing required - Built-in audio/speakers - Suitable for portrait and landscape orientation with a wide viewing angle of 89°/89°/89°/89° - Professional flat style - Normal brightness: 250 cd/m² - Wide operating temperature range to support various applications: -10℃ to +70℃ - 21.5-inch LCD widescreen panel with long-life LED backlight

  • Industrial PCs
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
19-inch industrial touch panel monitor IDS-3319

19-inch industrial touch panel monitor IDS-3319

"Operable while wearing gloves" 19 inches | 1280×1024 | -20~60℃ | VGA/DVI/HDMI | Waterproof and dustproof with IP65 rating

【Main Features of the Product】 ◆ Waterproof and dustproof processing based on IP65 standards ◆ 19-inch SXGA LCD panel with LED backlight ◆ Wide operating temperature range: -20℃ to 60℃ ◆ 5-wire resistive and P-CAP with burn-in prevention and wear-resistant protective glass ◆ Abundant input interfaces (HDMI, VGA, and DVI) ◆ Versatile mounting methods for rear mount and VESA mount

  • Industrial PCs
  • LCD display
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
10.4-inch Industrial Open Frame Monitor [IDS31-104]

10.4-inch Industrial Open Frame Monitor [IDS31-104]

10.4-inch Industrial Open Frame Monitor

- 10.4-inch LCD panel with LED backlight for long life - Wide operating temperature range of 0 to 50°C to support various applications - Typical brightness: 230 cd/m² - Flexible standard formats: open frame, closed frame, all VESA mount compatible - Configurable options: brightness 230 cd/m², mechanical housing, VIA, DVI, HDMI, DisplayPort - Touch options (USB and/or RS232 input): robust analog resistive membrane, SAW (4mm and 6mm), surface capacitive, projected capacitive

  • Expansion Boards
  • Industrial PCs
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
32-inch Industrial Pro Flat Touch Monitor IDP-31320W

32-inch Industrial Pro Flat Touch Monitor IDP-31320W

32-inch industrial pro flat touch monitor

- 32-inch LCD panel with LED backlight for long lifespan - Operating temperature: 0–40°C, storage temperature: -20–60°C - Typical brightness: 500 CD/m² - Resolution: 1920 x 1080 - Contrast ratio: 3000:1 - Portrait and landscape modes with wide viewing angles of 89°/89°/89°/89° - 10-point projected capacitive touch overlay - VGA & DVI & HDMI & DisplayPort I/O interfaces - IP51 standard from the front and sides

  • Industrial PCs
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
21.5-inch Industrial Pro Flat Monitor IDP-31215W

21.5-inch Industrial Pro Flat Monitor IDP-31215W

21.5-inch industrial pro-flat touch monitor

- 21.5-inch wide LCD panel with LED backlight for long lifespan - Operating temperature: 0–40°C, Storage temperature: -20–60°C - Typical brightness: 250 CD/m² - Resolution: 1920 x 1080 - Contrast ratio: 3000:1 - Portrait and landscape modes with wide viewing angles of 89°/89°/89°/89° - 10-point projected capacitive touch overlay - VGA & DVI & HDMI & DisplayPort I/O interfaces - IP51 standard from the front and sides

  • Industrial PCs
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Measurement device Bone Sound Velocity SOS Monitor MARK6600

Measurement device Bone Sound Velocity SOS Monitor MARK6600

Ultrasound bone health check.

The bone sound speed monitor measures the sound speed of the heel (calcaneus) and displays the results in five categories.

  • Other measurement, recording and measuring instruments
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
TFT Color LCD NTSC Monitor 'ILB-6448N'

TFT Color LCD NTSC Monitor 'ILB-6448N'

Easy screen adjustment with OSD menu! LCD display capable of showing NTSC signals.

The "ILB-6448N" is an LCD display that can display NTSC signals using our control board with a VGA (640×480 pixel) TFT color LCD module. Screen adjustments can be made easily through the on-screen display (OSD) menu. 【Features】 ■ Displays NTSC signals using our control board with a TFT color LCD module ■ Easy screen adjustments via on-screen display (OSD) menu ■ Compliant with the European RoHS directive *For more details, please refer to the PDF document or feel free to contact us.

  • LCD display
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Integral Electronic Wonder Monitor

Integral Electronic Wonder Monitor

Achieve high work efficiency and comfort! We offer a wide range of options including 7-inch and 11.6-inch models.

We would like to introduce the "Integral Electronic Marvel Monitor" that we handle. The "Multi-Touch Monitor," which achieves high work efficiency and comfort, is available in 7-inch, 10.1-inch, and 11.6-inch sizes. The "Open Frame Monitor" is available in 5.6-inch, 6.5-inch, 10.4-inch, and 12.1-inch sizes, with an optional touch panel available. Please choose according to your application. 【Product Lineup】 ■ Multi-Touch Monitors: 7M-M88, 10P-NT, 12PB-NT ■ Open Frame Monitors ・IOS-056V/IOS-056VT, IDS-065/IDS-065T, IDS-104/IDS-104T, IDS-121/IDS-121T *For more details, please refer to the PDF document or feel free to contact us.

  • LCD display
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Workstation monitor (with AC adapter)

Workstation monitor (with AC adapter)

ESD TR12-01 Dual Wire Wrist Strap and Constant Monitor for Workbench

This product is a workstation monitor with an AC adapter that complies with the ANSI/ESD S20.20 continuous monitoring requirements. It continuously monitors dual-wire wrist straps for two operators and one workbench. The LED and alarm can confirm improper grounding of the operators and workbench. The test voltage can be set to either 9V or 16V, and the test limits can be set from 10MΩ to 35MΩ. 【Features】 - Adjustable test voltage and upper limit for operators - Alarm sound can be set to off, low, or high - Easy installation and setup - Includes grounding hardware and wire clips - Comes with a power adapter for North America *For more details, please refer to the related link page or feel free to contact us.

  • Other anti-static devices
  • Other electric meters
  • EMC/Static electricity measuring equipment
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Workstation Monitor 'CTC331-WW'

Workstation Monitor 'CTC331-WW'

Permanent monitor for one workbench! Usable in North America, the UK, Japan, Asia, and various European countries.

The "CTC331-WW" is a workstation monitor that continuously monitors the integrity of the grounding path for one operator and one workbench (conductive or static dissipative). It is equipped with overvoltage (EOS) detection and human body voltage detection functions, and applies a low test voltage (0.40V) for handling products sensitive to static electricity. With a compact size of 2.2cm × 6.1cm × 6.6cm, it does not interfere with the workspace and comes with a tab for installation under the workbench. 【Features】 ■ Complies with ANSI/ESD S20.20 according to ESD TR1.0-01-01 ■ Overvoltage (EOS) detection ■ Human body voltage detection ■ Compact size (2.2cm × 6.1cm × 6.6cm) ■ 100-240VAC power adapter (with conversion plug) *For more details, please refer to the related link page or feel free to contact us.

  • Anti-static products
  • Other anti-static devices
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ground Monitor '770061/770062'

Ground Monitor '770061/770062'

Compatible with standard electrical systems of various countries! Using a calibrator allows for performance and compliance testing to be conducted in-house.

The "770061/770062" is a grounding monitor used in conjunction with the Static Control Program (SMP) for network communication. Data is collected through the SMP, which incorporates operator resistance, operator voltage, mat resistance, metal tool impedance, and metal tool EMI voltage. It continuously monitors the grounding paths of two operators, two conductive/static dissipative workbenches, and two metal tools, allowing for testing of operators at ultra-low voltage (0.05V) to handle ESD-sensitive components. 【Features】 ■ Complies with ANSI/ESD S20.20 according to ESD TR1.0-01-01 ■ Allows testing of operators at ultra-low voltage (0.05V) for handling ESD-sensitive components ■ Includes a monitor and two remote terminals ■ Can be used with dual-wire wrist straps *For more details, please refer to the related link page or feel free to contact us.

  • Static electricity eliminator
  • Anti-static products
  • Other anti-static devices
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
List strap and grounding monitor 'CTC337-WW'

List strap and grounding monitor 'CTC337-WW'

Constantly monitor the grounding of operators and equipment! Introducing wrist straps and grounding monitors.

The "CTC337-WW" is a wrist strap and grounding monitor that continuously monitors the integrity of the grounding paths for two operators and two metal devices. An alarm will sound if there is contact with or generation of voltages that could pose a risk to ESD-sensitive products. To prepare for handling sensitive components, only a low test voltage (0.10V) is applied to the operators, and the operator's jack can be easily replaced without soldering using the CTA252 replacement jack PCB. 【Features】 ■ Comes with AC adapter ■ Continuously monitors grounding for operators and equipment ■ Compact size (Height 2.2cm × Width 6.1cm × Depth 6.6cm) ■ Used with dual wire wrist straps ■ 100-240VAC power adapter (with interchangeable power plug) *For more details, please refer to the related link page or feel free to contact us.

  • Static electricity eliminator
  • Anti-static products
  • Other anti-static devices
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Zero Volt Monitor '19668'

Zero Volt Monitor '19668'

Selectable test voltage for operators! Continuous monitoring of the grounding paths for two operators and two workstations separately.

The "19668" is a constant monitor for 2 operators and 2 workstations. It continuously monitors the grounding path of the wrist strap and a safe resistance of 1MΩ without interruption or disconnection. You can set limits according to the restrictions of ESD-sensitive devices and other requirements, reducing the risk of fingertip voltage and overvoltage when handling ESD-sensitive equipment. 【Features】 ■ Operator test voltage: ±5V or ±8V ■ Adjustable upper/lower test limits for operators (10 or 35MΩ) ■ Comes with installation fixtures for easy replacement if the jack wears out ■ Complies with ESD TR1.0-01-0 and ANSI/ESD S20.20 ■ Includes NIST calibration certificate *For more details, please refer to the related link page or feel free to contact us.

  • Other anti-static devices
  • Other electric meters
  • EMC/Static electricity measuring equipment
  • Monitor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Monitor

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.